none
Logitech quickcam zoom driver RRS feed

  • Question

  • I have a Logitech Quickcam zoom webcam and can't find a driver for it.

    Vista RC1 only sees a unknown device and the light on the camera is on.

    Friday, September 22, 2006 8:04 PM

Answers

  • You'll have to wait until Logitech comes out with a driver that is compatible with Vista. Until then you are most likely out of luck.

    Andre Rivera

    Saturday, September 23, 2006 1:25 AM

All replies

  • You'll have to wait until Logitech comes out with a driver that is compatible with Vista. Until then you are most likely out of luck.

    Andre Rivera

    Saturday, September 23, 2006 1:25 AM
  • Same Problem with Logitech 4000

    USB, tried to install logitech driver, tried compatability mode. Software will not recognize driver.

    Windows Vista x86 does not even have a camera driver option?

     

    What gives?

    Monday, October 16, 2006 9:23 AM
  • I am afraid you are going to have to wait for logitech drivers

    check out their forums:

    http://forums.logitech.com/logitech/board?board.id=quickcam_software

     

    You will see there is a few threads for vista and x64 drivers all containing numerous cheesed off logitech webcam owners.

    It would seem that logitech are in no hurry to get out their driver. Meanwhile i have got to keep reconnecting my old xp machine just to have daily video chats with the family.

     

    Oh well...........

    Monday, October 16, 2006 5:18 PM
  • I have a Logitech Quickcam Zoom and this is how I got it to work:
    1. Install QuickCam 32-bit Version: 10.5.0 Build 1096b
    It can be found here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=10234
    2. When you get to the camera detection part where it asks you to plug in your camera, plug it into a new usb port (if you had it plugged in when you installed Vista) and just press skip.
    3. Windows may try and find the driver for it, you can cancel that too.
    4. Install the old QuickCam software (Version: 8.4.8 build 1034A)and overwrite anything it asks you to (it will fail to install completely because of the new version, but it will put the files you need into the Logitech program files directory.
    The old software is here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=7649
    5. Go to the windows orb (former start button), open control panel, go to system, then on the top left of the window click device manager.
    6. Find the unknown usb device (hopefully you only have one... otherwise unplug anything else that doesn't work or you haven't updated the driver for yet)
    7. Right click and select update driver, choose a location to find the driver, navigate your way to C:\Program Files\Logitech\QuickCamWebInstall\Drivers\WinNew\PRO2
    8. Press OK or whatever, and let it install.
    9. Enjoy!

    Mine didn't even need to reboot and worked with the 10.5 QuickCapture software. Still need to test with Skype and Live Messenger though.
    Wednesday, February 14, 2007 5:44 PM
  • you are a fucking god.
    Friday, February 16, 2007 7:36 PM
  •  

    It did work for me too, I'm under Vista Ultimate and using Quickcam zoom.

     

    Thank you so much, I almost ordered another Webcam.

     

    and I think this is the aim of Logitech by not updating their drivers to vista.

    So I can confirm that the above instructions work 100% clear and I did test it with all program that require a webcam (MSN, Yahoo, Skype etc..) it's POSITIVE.

     

    Keep Up The Good Work, and Let's share those info to everyone.

    Saturday, February 17, 2007 11:28 AM
  • Thank you very very very much.

     

    Works like a charm here.

     

    Don't have to wait for logitech to give me the proper drivers.

     

    Thanx.

     

     

    Chappy

    Sunday, April 15, 2007 1:17 PM
  • Hello i saw you post very nice but i could not make it work? Do you know if this tricks works if you have 64-bit Vista? Or do one know what else to do?

    Tuesday, April 17, 2007 5:50 PM
  • Azural,

    You're the nuts mate.  Ta much.  Works perfect with Skype as well!

    Saved me a few $$$ and avoided buying a new cam!

    Cheers

    Wednesday, May 2, 2007 11:44 AM
  • thkx very much.

    It works!!!

     

    Thursday, May 10, 2007 2:03 PM
  • hello all been trying to set up my quick cam zoom for weeks at last thanks to this i have but with a few modifications.

    download both  software updates  qu848 xp update and  qu1051 vista update now i know that  qu1051 is for another camera but if  install the xp once first then the vista once over the top ignore all errors will sort its self out after restart but it works and thats all i did nothing more.

    good luck hope it works for some of you.
    Saturday, May 12, 2007 2:28 AM
  •  HaredZombie wrote:
    Hello i saw you post very nice but i could not make it work? Do you know if this tricks works if you have 64-bit Vista? Or do one know what else to do?

     

    hee mate i have ultimet 64 bit aswell just go to

    1Go to the windows orb (former start button), open control panel, go to system, then on the top left of the window click device manager.

    2Find the unknown usb device your webcam ofcourse

    3Right click and select update driver, choose a location to find the driver, now select below the search i want to do it myzelf (i have a dutch version so dont know the real name)

    4 once you are in there u can sellect left factory and do logitech on the recht your type choose logitech quickcam pro 4000

    5 enjoy the webcam   

    i know this because they are both about same hardware so take care and dont show to much stuff

    Tuesday, May 22, 2007 8:10 PM
  • Brilliant stuff...many thanks..
    Friday, May 25, 2007 8:31 AM
  • Worked like a charm, with one small difference.  When I updated the drivers in control panel, instead of selecting the PRO2 folder, I had to let Windows search the entire Logitech folder.  I love the option to include subfolders in driver searches.  It makes things a helluva lot easier.  Thanks again, you are the man!
    Friday, June 1, 2007 6:11 AM
  • Hi guys,

    Can somebody be kind to upload those two files mentioned by Azural in some place? Apparently Logitech has changed their website and now the file is not available anymore..or perhaps in a different link Stick out tongue

    Thanks, I really appreciate it Big Smile

    regards, pojz
    Saturday, June 2, 2007 4:02 AM
  •  kews84 wrote:
    Hi guys,

    Can somebody be kind to upload those two files mentioned by Azural in some place? Apparently Logitech has changed their website and now the file is not available anymore..or perhaps in a different link

    Thanks, I really appreciate it

    regards, pojz


    sorry, just found it here:
    Logitech ftp
    Saturday, June 2, 2007 5:03 AM
  • Finally the easiest instructions to install the Logitech QuickCam Zoom on Vista:
    - Go to ftp://ftp.logitech.com/pub/techsupport/quickcam/
    - Get the qc828en.exe y qc1051en.exe files. Note that you may choose another language ( for example qc828esp.exe y qc1051esp.exe).
    - Install both files (first the qc828). Myabe you've to restart.
    -  Connect the webcam. Windows will try to find the drivers.
    - You'll have to select the drvier's path manually. Choose this folder: C:\Program Files\Logitech\QuickCamWebInstall\Drivers\WinNew\PRO2.
    - Vista will install the drivers and your webcam should work now!
    Saturday, June 16, 2007 11:00 PM
  • It works perfectly with the newest QuickCam v11.0 32bit too! Wonderful help mate, you are the greatest!!!
    Tuesday, June 26, 2007 5:59 PM
  • Has anyone had this work with YIM!?
    Although I get a preview on my side, the recipient side always gets a black box.
    Yahoo help page states:

    Some Logitech webcam drivers may cause one of the following problems:

    • Windows freezes when accessing the webcam
    • A black screen appears when using the webcam in Messenger
    • A ‘Webcam not found’ error message appears.
    • After 3 seconds, the sound drops out of calls made via Yahoo! Messenger

    If you already verified that your device is compatible through the above steps and you’re a Logitech webcam user, please click here to update your Logitech webcam driver.



    Also has anyone tried this with the v11 of the driver now available?


    Tuesday, July 3, 2007 3:30 PM
  • Hello everyone,

    Although I didn`t communicate with anyone directly, all of your imput & comments really helped me get my QuickCam 4000 running, I`m describing the difficulty I had in case anyone has the same. After the driver installed, no sound would come out of my speakers, almost like the install messed around with the codecs. No sound would occur, even from startup, WMP or anything else. After the install, I recorded a video, played it back in WMP & the problem fixed itself.
    Wednesday, July 4, 2007 6:37 PM
  • You're a good person Azural and you'll definitely go to heaven !!  I have a Logitech Quickcam Zoom as well (white sphere with blue visor) which Logitech says "won't work with Vista".  It worked fine on my old PC with WinXP and had zoom and motion detection, so was great for home security.  I was prepared to buy a new camera for Vista, however, Logitech's current range appears to have been dumbed down and there's nothing with these features.  So I followed your instructions to get it working on my new Vista PC:
    1.  Installed QuickCam 32-bit Version v10.5.1 for Quick Cam Pro 4000 downloaded from the Logitech website (nb: when you are in the webcam software downloads area of the Logitech website, you need to click on "Didn't Find Your Camera?" -- this will then take you to downloads for older models which are no longer in their current product range)
    2.  During installation, when it asked if I wanted to install the driver now, I replied "No, I will Install Later"
    3.  Then I went to Windows Device Manager to install the device driver manually - found the USB device marked "Unknown" - right clicked to Install Driver > I will locate the driver on my computer > Imaging Devices > Logitech > then scrolled down the list on the right and selected Quick Cam Pro 4000 (ignore the warning)
    4.  Voila - the Quickcam Zoom now works fine on Vista.  Unfortunately, Ill0gitech's current quickcam software range has much less functionality than the old Image Studio that I had before (the new stuff seems to be designed only for kiddies with IM)
    5.  SO I purchased Blue Iris webcam software (for Vista) from Perspective Software - approx. $19 - this is designed for home security, and has full functionality including motion detection - you can record video and snapshots and set your own frame rate, resolution, sensitivity, etc.
    6.  Bingo !!  Now my faithful old Quickcam Zoom is happily cruising along on Vista doing pretty much what it used to - no thanks to the marketing geniuses at illogiteck
    7.  NB:  for both the Logitech Wecam application and Blue Iris, select "Launch at Startup" = NO
    8.  When you launch Blue Iris, the Logitech desktop shortcut thingie will pop up (just ignore it, or exit it)
    9.  You can launch either the Logitech Webcam application OR Blue Iris, however, if you launch Logitech Webcam first, then try to launch Blue Iris, Blue Iris may say "Camera not Connected" (because the Logitech Webcam application grabbed it first; however, you can run both applications simultaneously if you want, provided you launch Blue Iris first).
    • Proposed as answer by m80116 Saturday, October 2, 2010 10:35 PM
    Saturday, August 4, 2007 5:44 AM
  • Oh my God! Something that FINALLY works! I've been trying to get my Quickcam Zoom installed on Vista for about 2 months now. I gave up several times then changed my mind & tried again with no luck whatsoever. Just last week I put the damn thing up for sale & went & bought a Lifecam VX-1000 two days ago. It's OK, but I liked the Logitech much better. Well I didn't end up selling it thank God & now that I have it up & running I'll be taking the new one back. You are a true lifesaver Azural. I should take my refund & buy you a nice present. LOL! Thanks so much. I love you man!
    Sunday, August 12, 2007 2:47 AM
  • I have windows vista 64 bit but can't find driver

     

    Saturday, August 25, 2007 6:55 PM
  •  

    It looks like they might have taken down the qc828en or qc828enu file. I'm running xp x64 and I suspect that this fix'll do the trick if I can get a hold of those files..
    Sunday, August 26, 2007 8:39 AM
  • I just had a thing in the logitech support forums, I'll be posting screen shots here in a bit as they deleted the postings.

    Sunday, August 26, 2007 8:30 PM
  • The third screen was what happened when I tried to reply to the most recent post.

     

    <a href="http://photobucket.com" target="_blank"><img src="http://i25.photobucket.com/albums/c68/Ravenspine/logitechcrap1.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

     

    <a href="http://photobucket.com" target="_blank"><img src="http://i25.photobucket.com/albums/c68/Ravenspine/logitechcrap2.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

     

    <a href="http://photobucket.com" target="_blank"><img src="http://i25.photobucket.com/albums/c68/Ravenspine/logitechcrap3.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

    Sunday, August 26, 2007 11:50 PM
  • It's been brought to my attention that the 32 bit xp drivers .inf files can be decorated to work with xp x64 (and likely vista). There's a document that I'm going to be going from on that linked below, if anybody else is interested in taking a look. This just makes it even more retarded that logitech didn't do it themselves.

     

    http://www.microsoft.com/whdc/driver/install/64INF_reqs.mspx

    Monday, August 27, 2007 7:14 PM
  • Thank you, this was VERY helpful!

    Sunday, September 2, 2007 6:01 AM
  • You haven't done the file decoration or have any additional info do you? I haven't looked into it yet since my last post actually.

    Sunday, September 2, 2007 7:00 AM
  • Were you able to produce some working drivers? I haven't done any work since my last post to be honest.

    Sunday, September 2, 2007 7:02 AM
  • This trick doesn't work with XP x64 as 8.4.8 doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

     

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    2. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf replace all "08bd" with "08b4" or just add the corresponding lines

    4. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    5. Select Logitech QuickCam Pro 4000 and continue with installation.

     

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

     

    I suppose you can install the Logitech QuickCam software after it. I just don't need it.

    Also I suppose this will work with Vista x64 but I don't have one at hand to try out.

     

    • Proposed as answer by Carlitouch Tuesday, November 26, 2013 10:36 PM
    Sunday, September 9, 2007 9:05 AM

  • I have a question for you.  I went to the wite on your step #1, but could not locate what you are talking about.  The link doesn't take to straight to the version i am supposed to download, so how do i find it on Logitech's site??  Thanks for your help!
    Wednesday, October 31, 2007 9:17 PM
  • I followed this method as advocated by Carbon Unit but without success.   In Windows Device Manager I could find no reference to Imaging Devices or indeed to Quick Cam Pro 4000.  A search of the computer reveals that this is not mentioned anywhere.  The camera light comes on and when an attempt to operate it is made a message is displayed to the effect that the camera is not properly connected - unsurprisingly !

    Has anyone else any other bright ideas ?

     

    Saturday, November 3, 2007 11:16 AM
  • Great post, worked like a charm in msn messenger.  I've had this cam in storage for about 1 year, go figure lol. Thanks for the post!

    Thursday, November 15, 2007 4:04 PM
  • Please I am despereately in need of a drive for my webcam as the above message shows. I trust you and that is why i am appealling to you for this. Thanks for your continues help.

     

    Ann

    Monday, November 19, 2007 10:31 AM
  • Did the trick for me!!  Thanx very much! Big Smile (happy face)

    Monday, November 19, 2007 11:41 AM
  • Thanks your a genius i was getting worried i would need a new camera seen as it is only 2 months old

     

    thanks loads and it works on mine for messenger and skype

     

    Sunday, November 25, 2007 10:27 AM
  • gozer! super bedankt voor je post!!!

    Ik had bijna xp teruggezet maar nu ben ik weer wat verder geholpen, mocht je nog een oplossing weten voor autocad hoor ik het graag!!!

    vista ultimat 64... tja tis ff wennen en geouwehoer, maar ooit zou ik het wel relaxed gaan vinden....hoop ik....
    Wednesday, January 16, 2008 9:47 PM
  • hey I have this quickcam and am running a 32bit version of vista. I am trying to get the file mentioned earlier in this post -  qc828en.exe

     

     

    but can't find it on the logitech ftp.  Can someone point me to this file or send me this? Thanks

    Friday, February 29, 2008 6:38 AM
  •  

    Tuesday, March 18, 2008 6:11 AM
  •  

    Monday, March 31, 2008 10:42 AM
  •  

    Monday, March 31, 2008 2:06 PM
  •  Chappy584608 wrote:

    Thank you very very very much.

     

    Works like a charm here.

     

    Don't have to wait for logitech to give me the proper drivers.

     

    Thanx.

     

     

    Chappy

    Monday, March 31, 2008 4:20 PM
  • Iceslice, thanks ever so much, works like a dream.

    Been pulling my hair out trying to get it to work on x64

     

    Wednesday, April 2, 2008 4:52 PM
  • Saturday, April 12, 2008 1:47 PM
  • Out of desperation I downloaded and installed the qc848enu.exe file (in place of the qc828enu.exe file in the instructions above) from the logitec FTP site and everything seems to be working OK. I'm running Vista 32 bit.

    Friday, April 18, 2008 2:50 PM
  • Can you let me know when, so i can pay it!!! 

    Monday, June 2, 2008 8:15 PM
  • This solution is great! I use Vista home premium 32 bit.  I downloaded qc848nld.exe and the newest qc1150.exe. I installed the qc848, restarted my computer. Installed qc1150 and waited for the connect screen. As soon as you connect the webcam windows kicks in. Skip the connect screen from the logitech install and end the installation of the program. Then choose install driver from the windows screen and indicate that you want to search your drive for the driver. Go to the path Bajo en calorías mention and the driver installs without a problem.

    My camera came up as a Quickcam Zoom as it should and works fine in all programs.

     

    Thanks for the tip guys!

     

    Greets, Chriz

     

     

    Tuesday, June 17, 2008 10:03 PM
  • Just a note to anyone else with this problem:

    If you have a Quickcam Zoom, use 08B3
    ... 08B4 only works with the silver models!

    Here are the rest of the model codes:

    08B0  ;  Pro 3000 (Mono)
    08B1  ;  Notebooks Pro
    08B2  ;  Pro 4000
    08B3  ;  Zoom
    08B4  ;  Zoom (Silver)
    08B5  ;  PTZ (Orbit)
    08BD  ;  Pro 4000

     iceslice wrote:

    This trick doesn't work with XP x64 as 8.4.8 doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

     

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    2. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf replace all "08bd" with "08b4" or just add the corresponding lines

    4. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    5. Select Logitech QuickCam Pro 4000 and continue with installation.

     

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

     

    I suppose you can install the Logitech QuickCam software after it. I just don't need it.

    Also I suppose this will work with Vista x64 but I don't have one at hand to try out.

     

    Friday, July 25, 2008 1:37 AM
  • Thanks man, My webcam breathes.
    Tuesday, July 29, 2008 12:58 PM
  • So what to do when it wont let you install al lesser version of teh software?

    I have been trying all that you posted, but no success

    S
    Thursday, August 7, 2008 3:33 AM
  • Many thanks - great solution. Had a problem finding Quickcam 32bit version but used QUICKCAM CHAT - 32 bit Vista driver 11.5. Worked a treat. Had to reboot to use the Quickcam adjustments eg volume, brightness etc.
    Thanks again
    Sunday, August 31, 2008 5:39 PM
  • I copied the http......... and yahoo couldn't find this location.  I have a webcam with windows vista

    and it doesn't work and was hoping your directions  would work.

     

    Saturday, September 27, 2008 12:16 AM
  • amazing dude, thanks a lot.
    Sunday, October 12, 2008 2:32 PM
  •  iceslice wrote:

    This trick doesn't work with XP x64 as 8.4.8 doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

     

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    2. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf replace all "08bd" with "08b4" or just add the corresponding lines

    4. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    5. Select Logitech QuickCam Pro 4000 and continue with installation.

     

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

     

    I suppose you can install the Logitech QuickCam software after it. I just don't need it.

    Also I suppose this will work with Vista x64 but I don't have one at hand to try out.

     

     

    I've completed these steps and it "almost" works (on Vista64) but no luck!   Any help would be appreciated.  Did anyone get this to work on Vista 64bit? It appears people got it working on 32bit but not 64bit Vista.

     

    I get as far as picking the QuickCam 4000 from the list but then it says "Driver is not intended for this platform."

     

    Is there something else I need to change? I have the QuickCam Zoom (not silver).  Thanks in advance.

     

    Here's the first part of the file for which I changed all 08BD references to 08B4

     

    [Manufacturer]
    %LogitechMfg%=Logitech,nt,ntamd64,nt.6.0,ntamd64.6.0

    [Logitech]
    %PID_08B2_DD%=PID_08B2,USB\VID_046D&PID_08B2&Mi_00      ; Pro 4000
    %PID_08B5_DD%=PID_08B5,USB\VID_046D&PID_08B5&Mi_00      ; PTZ
    %PID_08B2_DD%=PID_08B2,USB\VID_046D&PID_08BD&Mi_00      ; Pro 4000

    [Logitech.NT]
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&Pid_08B2&Mi_00   ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XP,USB\VID_046D&PID_08B5&Mi_00   ; PTZ
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&PID_08BD&Mi_00   ; Pro 4000

    [Logitech.NTamd64]
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08B2&Mi_00   ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XPAMD64,USB\VID_046D&PID_08B5&Mi_00   ; PTZ
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08BD&Mi_00   ; Pro 4000

    [Logitech.NT.6.0]
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&Pid_08B2&Mi_00      ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XP,USB\VID_046D&PID_08B5&Mi_00      ; PTZ
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&PID_08BD&Mi_00      ; Pro 4000

    [Logitech.NTamd64.6.0]
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08B2&Mi_00   ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XPAMD64,USB\VID_046D&PID_08B5&Mi_00   ; PTZ
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08BD&Mi_00   ; Pro 4000

     

    Under the Details tab of my Unknown device I have:

     

    USB\VID_046D&PID_08B4&REV_0003&MI_00
    USB\VID_046D&PID_08B4&MI_00

     

    Cheers!

    Tuesday, October 14, 2008 4:02 AM
  • thanks a lot.
    Sunday, October 19, 2008 3:40 AM
  • Thank you man it worked, Genius>...........

     

    Tuesday, October 28, 2008 1:46 AM
  •  

    no puedo istalar la maquina
    Tuesday, October 28, 2008 10:36 AM
  • i can't get it to work either.

    i'm tried the quickcam software, won't work.

    the other software won't unpack from logitech, it says it's corrupt.

    any ideas.

    i have vista 32bit SP1 home and quickcam zoom silver

    i think the workaround problem has something to do with the SP1
    Wednesday, November 12, 2008 5:07 PM
  • so i got it to work as a QUICKCAM, but i can't adjust the video settings under the configuratin to adjust the brightness etc?  any ideas
    Wednesday, November 12, 2008 5:43 PM
  • I to have a problem with Quickcam zoom Have tried the link above but cannot find 32 bit version to download have I missed a link?

     

    • Proposed as answer by leahbeth Saturday, December 13, 2008 11:44 AM
    Thursday, November 20, 2008 11:45 AM
  • If I can get it to work anyone can,,lol.
    I just googled the versions to download and it gave me the link.

    http://www.findmysoft.com/drivers/download-Logitech-QuickCam-8-4-8-build-1034A-driver.html

    http://drivers.softpedia.com/get/Other-DRIVERS-TOOLS/Others/Logitech-QUICKCAM-1050-Build-
    1096b.shtml


    then just follow the instructions that are on the 1st page
    simple
    works
    and thank you
    I wonder how they know to do that freakin amazing!!
    Saturday, December 13, 2008 11:55 AM
  • Wow thank you so much for your post Azural. Worked like a charm. I cant believe how sleazy Logitech is when it comes to cams. I paid 90 dollars for a webcam and buy alot of things from them. But to purposly hide info on how to keep your cam they lie and say its no way. Power of the internet rules.
    Saturday, April 25, 2009 5:26 PM
  • Thank you, I just tried this after installing Windows 7 and it worked like a charm, you just saved me buying a new webcam
    Thursday, April 30, 2009 8:50 AM
  • This trick doesn't work with XP x64 as 8.4.8 doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

     

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    2. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf replace all "08bd" with "08b4" or just add the corresponding lines

    4. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    5. Select Logitech QuickCam Pro 4000 and continue with installation.

     

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

     

    I suppose you can install the Logitech QuickCam software after it. I just don't need it.

    Also I suppose this will work with Vista x64 but I don't have one at hand to try out.

     


    thank you so mutch.......
    got my quickcam zoom working like a charm.....
    on windows 7 64bit,....
    trying for months now to get it work.....

    lets al say a BIG.F.... YOU .....to logitech!!!!!


    Wednesday, August 5, 2009 8:24 PM
  • i need driver of logitech model numbr v-uam27.help me
    Saturday, October 17, 2009 5:56 PM
  • It works splendidly, in Windows 7(64bits)  too! Thanks.
    Saturday, November 7, 2009 11:47 AM
  • Brilliant!!! this is also working for windows 7! Thank you very much
    Tuesday, January 5, 2010 1:20 PM
  • When i get to the step to specify the PRO2 directory, i get the following error. The system cannot find the file specified Has anyone else seen this? Im running win7 Ultimate.
    Thursday, January 14, 2010 6:47 PM
  • Nice dude thank you very much ;-).

    And btw. yes the software works but also via using a trick ;-) !

    Being in the ..\qc1501enu_x64\ folder change to the QuickCam\x64\ folder and execute the QuickCam.msi to install the software.

    Works smoothly on my Windows 7 64bit!


    Saturday, January 16, 2010 10:16 PM
  • Hi,

    Can you give the spcific path to get to the "drivers" directory ?

    I don't find it whan I unzip qc1051enu_x64.exe with 7z.

    Thank you.


    Mad


    Thursday, February 4, 2010 8:45 PM
  • hey can you help me with a driver problem?
    • Proposed as answer by Wasabihound Tuesday, March 9, 2010 11:22 AM
    Friday, February 12, 2010 12:36 AM
  • hey can you help me with a driver problem?

    Hi

    I have same problem - just tried installing the quickcam zoom driver as proposed by Azural (Feb 14 2007) (great post btw Azural).

    Driver installed and Win 7 recognised camera.

    Then installed Logitech Webcam Software 1.1 (http://www.logitech.com/pub/techsupport/quickcam/lws110.exe).

    Seems to be working okay now and in SKYPE as well.

    Settings however, can't be changed (darn!)

    cheers

    Neil
    • Proposed as answer by Wasabihound Tuesday, March 9, 2010 11:26 AM
    Tuesday, March 9, 2010 11:25 AM
  • thx very much this was doing my head good job THX.
    Tuesday, May 4, 2010 6:27 PM
  • SOLUTION FOUND!!!

    Im using this for the quickcam Zoom on win7 32 bit.

    Download and unzip, works for 32 and 64 bit, although it claims 64 bit only, it worked on my win7 ultimate 32 bit.

    This of course was after following this entire thread with every solution ending in the same "Cannot find file" error encounted while installing the driver.

    This worked perfectly, no hacking or fiddling. just download unzip and point the driver update window to the directory and go! works in skype and msn PERFECTLY!

    zoom/face tracking works, as do all the image modes and color balancing options.

    http://www.styleofthestreets.com/downloads/qczoom.zip


    n8r4d3
    • Proposed as answer by n8r4d3 Tuesday, May 18, 2010 6:31 AM
    Tuesday, May 18, 2010 6:31 AM
  • Muchas gracias, gracias a ti tengo funcionando mi logictech zoom en  Windows 7 Ultimate x64 

    Friday, May 21, 2010 8:16 AM
  • Gracias!!! Funciona en Windows 7 Professional a 32 Bits!!

     

    Saludos!!

    Saturday, May 22, 2010 2:52 PM
  • Yes it did work for me except that I used the 64bit QuickCam package for the Quick Cam Pro 4000 driver.

    Updated the driver manually of the "unknown" USB device and it works beautifully with my Vista SP1 64bit. For simple chat IM video is everything I need. I can even use the zoom feature of my Quick Cam Zoom. Webcam made useful again.

    Saturday, October 2, 2010 10:41 PM
  • Azural - You are a genius my friend. Thank you very much for the incredible tip. I don't use webcam much but was annoyed when I couldn't get it to work!

    Thanks again

    Bruno

    Tuesday, November 16, 2010 11:20 PM
  • SOLUTION FOUND!!!

    Im using this for the quickcam Zoom on win7 32 bit.

    Download and unzip, works for 32 and 64 bit, although it claims 64 bit only, it worked on my win7 ultimate 32 bit.

    This of course was after following this entire thread with every solution ending in the same "Cannot find file" error encounted while installing the driver.

    This worked perfectly, no hacking or fiddling. just download unzip and point the driver update window to the directory and go! works in skype and msn PERFECTLY!

    zoom/face tracking works, as do all the image modes and color balancing options.

    http://www.styleofthestreets.com/downloads/qczoom.zip


    n8r4d3


    Hi. I don't found zoom/face tracking "intelligent" option in Windows 7x64. But, camera it's working and other options it's good.

    Logitech Webcam Software 2.10 (lws210.exe), Logitech Motion Detector Gadget and Logitech QuickCapture Gadget it's working for me. Visual Effects not function

    • Edited by todonormal Wednesday, December 1, 2010 11:14 AM addon
    Saturday, November 27, 2010 10:11 AM
  • FOR WIN 7 x64:

    Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    Unpack the installation file (called qc1051enu_x64.exe) using Rar or 7z

    In the folder called Drivers\x64\PRO64\ open lpro64v.inf and replace all "08bd" with "08b4" or just add the corresponding lines

    Install software (skip connect cam) Go to "device manager" (computer/ right click - properties) select faulty unit in the list and click "update driver"

    Select update driver from CD and select the file you just edited.

    Then select QuickCam Pro 4000

    Tuesday, February 22, 2011 5:09 PM
  • Good stuff! Works perfectly in Windows 7 64 bit.

     

    Thanks!

    Friday, August 12, 2011 8:28 AM
  • Sorry, when I run the install setup, it does not work (says "this product is not for your OS...) Guess I have to read more of this long post...
    Thursday, December 29, 2011 8:27 AM
  • http://www.styleofthestreets.com/?entry=8

    Here is some detail on a solution mentioned below

    • Proposed as answer by D_rone Wednesday, January 4, 2012 7:31 PM
    Wednesday, January 4, 2012 7:31 PM
  • After reading this huge thread, trying to install my quickzoom (blue) on windows 7 ultimate 32 bits I finally manage to get it working !

    I was having the same probleme as many others, after reading the excellent walkthroug by Azural, in the end it didn't work, always the same error "Window found the drivers but cannot installed it, not found the specified files" blabla bla.... it was so frutrating !

    But in the end, after reading this page entirely i found that all of the driver were not working because it's not for the same camera and thanks to Tafari who pointed out that i have to use 08b3 instead of 08b4.

    I just download the qczoom.zip change all the 08b4 by 08B3 and it worked !!! freaking, hell yea!!

    So thanks all of you, and i hope this won't get with no attention.

    Monday, May 14, 2012 2:41 PM
  • 6 years on, now it's Sep 2013. And this thread is still of value. To me at least.

    My webcam is the Quickcam Zoom. I read the whole thread, but tried n8r4d3's method and link first. It worked on the first try. Even though my camera was thought by Win 7 Home Premium as Quickcam 4000, it still works in Skype.

    Thanks to all who contributed to this thread.

    ------------------------------------------------

    SOLUTION FOUND!!!

    Im using this for the quickcam Zoom on win7 32 bit.

    Download and unzip, works for 32 and 64 bit, although it claims 64 bit only, it worked on my win7 ultimate 32 bit.

    This of course was after following this entire thread with every solution ending in the same "Cannot find file" error encounted while installing the driver.

    This worked perfectly, no hacking or fiddling. just download unzip and point the driver update window to the directory and go! works in skype and msn PERFECTLY!

    zoom/face tracking works, as do all the image modes and color balancing options.


    n8r4d3


    Friday, September 20, 2013 5:16 PM
  • you're a genius. Thanks!
    Saturday, February 14, 2015 3:54 AM
  • After trying everything found on the forums and nothing worked, this proved to work without any problems :)

    I have a windows x64 bit professional and recently bought an old quickcam zoom to do some astronomy photography with my telescopeþ  Well no drivers would work until i stumbled on this 

    http://digiex.net/downloads/download-center-2-0/drivers/9924-logitech-quickcam-zoom-windows-7-32bit-x86-64bit-x64-driver-download.html

    1. extract into a folder with same name

    2.plug the web camera 

    3.Go to devices and printers

    4.right click the unknown usb and choose properties

    5.click the update driver for the unknown device

    6.Click the find manually button click the browse button

    7.choose the folder that you extracted with rar program and hit the PRO64 folder under qzoom folder

    and hit Next

    Works perfectly

    I downloaded then the webcam software from this softonic site and everything is working fine :)

    http://gsf-cf.softonic.com/2a5/20f/30f25246fe7af0fb669cd05e7eaa38ba5b/file?SD_used=0&channel=WEB&fdh=no&id_file=299967&instance=softonic_en&type=PROGRAM&Expires=1425992140&Key-Pair-Id=APKAJUA62FNWTI37JTGQ&Signature=K0xNUg8hQoaDN5a2~gNFnLT2nCahqz1UP3djZmOo1~b2CyBs2AuOMPBXMCNdP5dAev5vAvffoRv--C28gYHsm~e9V8O1dPoCmnwys-DG3Tz3jbxibsPGk5WV3YXvtomPErY0QGpLwmGBjGZGNAeB7y1RFZKPaDZGT8qaNp7RbZc_&filename=lws251.exe

    Hope it works for you as well

    Þorkell

    Tuesday, March 10, 2015 1:59 AM