locked
error could not build a topology to decode the input file RRS feed

  • Question

  • 682593 (3088) - exe\logging.cpp:0841: --- START 2014\11\4 5:38:34 AM ---
    682593 (3088) - exe\main.cpp:4511: WinSAT registry node is created or present
    682609 (3088) - exe\main.cpp:4542: Command Line = winsat  formal
    682625 (3088) - exe\main.cpp:4314: INFO: The axe results path environment variable is not set. Assuming we aren't running under AXE.
    682625 (3088) - exe\main.cpp:4649: INFO: Winsat is not running in AXE mode.
    682625 (3088) - exe\processwinsaterror.cpp:0146: ERROR: tried to read resource strings, unknown exception occured
    682687 (3088) - exe\main.cpp:4741: > IsFormal=TRUE  IsMoobe=FALSE.
    682687 (3088) - exe\watchdog.cpp:0113: WatchDogThreadProc Launched with priority 0
    682734 (3088) - exe\main.cpp:4860: Watch dog system enabled
    682734 (3088) - exe\main.cpp:4875: Main watch dog timer set to 600.0 seconds
    682875 (3088) - common\winsatutilities.cpp:1060: PNPID from DX9 call = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    682875 (3088) - common\winsatutilities.cpp:1126: Index [0]: PNPID = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    682875 (3088) - common\winsatutilities.cpp:1150: Matching device PnPID is PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    682875 (3088) - common\winsatutilities.cpp:1126: Index [1]: PNPID = ROOT\BasicDisplay
    682937 (3088) - exe\main.cpp:2615: > DWM Running.
    682937 (3088) - exe\main.cpp:2622: > turning off DWM.
    682937 (3088) - exe\main.cpp:2595: > EMD service will be restored on exit.
    682984 (3088) - exe\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    682984 (3088) - exe\main.cpp:2923: > power policy saved.
    683171 (3088) - exe\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    683171 (3088) - exe\main.cpp:2944: > power policy set to maximum.
    684515 (3088) - exe\main.cpp:0867: > WinSAT info: Version=V6.3 Build-9600.16384

    684562 (3088) - exe\main.cpp:1007: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    684562 (3088) - exe\main.cpp:4125: > Power 'execution' request successfully set.
    684562 (3088) - exe\main.cpp:1852: > Run Assessment features 
    684593 (3088) - common\winsatutilities.cpp:1060: PNPID from DX9 call = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    684593 (3088) - common\winsatutilities.cpp:1126: Index [0]: PNPID = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    684593 (3088) - common\winsatutilities.cpp:1150: Matching device PnPID is PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    684593 (3088) - common\winsatutilities.cpp:1126: Index [1]: PNPID = ROOT\BasicDisplay
    684640 (3088) - exe\main.cpp:1852: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 1 -alphaw 2 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    684656 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    696296 (3088) - exe\processresults.cpp:4571: > Wrote video memory bandwidth to the registry 3000430
    696359 (3088) - exe\main.cpp:2138: > DWM Assessment results processing SUCCESS
    696359 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    696359 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    702843 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    702843 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    709234 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    709234 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    716265 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    716265 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723515 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    723515 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723515 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723515 (3088) - exe\main.cpp:1852: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    723515 (3088) - mfmedia\mfmediaop.cpp:0508: ps_MFMediaWorkerThread Launched with priority 0
    733562 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 1555: 0x800705b4 == ERROR_TIMEOUT
    733578 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 1279: 0x800705b4 == ERROR_TIMEOUT
    733578 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 388: 0x800705b4 == ERROR_TIMEOUT
    733578 (3088) - mfmedia\mediaerror.cpp:0096:Error: Could not build a topology to decode the input file. (p_BuildTopology)
    733625 (3088) - exe\main.cpp:2157: > mfmedia Assessment FAILED due to an error
    733625 (3088) - exe\main.cpp:4164: > Power request 'execution' successfully cleared.
    733625 (3088) - exe\processresults.cpp:4571: > Wrote video memory bandwidth to the registry 3000430
    733625 (3088) - exe\processresults.cpp:1421: Skipping HighDefPlayback limit check.
    733625 (3088) - exe\processresults.cpp:1547: No D3D10 Subscore. Using D3D9 subscore for final D3D score.
    733640 (3088) - exe\processwinsaterror.cpp:0298: Unspecified error 21 occured.
    733640 (3088) - exe\processwinsaterror.cpp:0319: Writing exit code, cant msg and why msg to registry 
    733796 (3088) - exe\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    733796 (3088) - exe\main.cpp:2985: > Power state restored.
    733812 (3088) - exe\main.cpp:3000: > Successfully reenabled EMD.
    733859 (3088) - exe\main.cpp:3026: > Composition restarted
    733859 (3088) - exe\watchdog.cpp:0339: Watch dog system shutdown
    733859 (3088) - exe\main.cpp:5204: > exit value = 21.

    i accidentally deleted all the formal assessment.xm file 
    please help me

    Tuesday, November 4, 2014 1:03 AM

Answers

  • Please provide more details on this. Nothing is clear from this log file / dump what actually you're trying to run.

    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    Tuesday, November 4, 2014 11:49 AM
  • Hi,

    I'm agree with amavhsrma, we do need more information about your problem. We couldn't provide any suggestion with single log file.


    Roger Lu
    TechNet Community Support

    Wednesday, November 5, 2014 3:47 PM

All replies

  • Please provide more details on this. Nothing is clear from this log file / dump what actually you're trying to run.

    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    Tuesday, November 4, 2014 11:49 AM
  • Hi,

    I'm agree with amavhsrma, we do need more information about your problem. We couldn't provide any suggestion with single log file.


    Roger Lu
    TechNet Community Support

    Wednesday, November 5, 2014 3:47 PM