windows 2012 Hyper-v RRS feed

  • Question

  • Not sure if I posted in the correct forum, but here is the problem I have:

    I currently have two nic's cards configured on the server

    Nic 1 going to 192.168.x.x

    Nic 2 going to 10.1.x.x

    I built a virtual switch for the 192 network and the vswitch is showing the correct ip address from the nic card.  I can ping and the vm's have full access to the network

    I also built a vswitch for the 10.x network.  When I look at the Ethernet virtual adaptor, I see the correct ip address that was originally configured on the nic

    However, when I do an IP config, the IP address showing is a 169.254.x.x.  I lose connection to that segment completely. 

    any thoughts?

    Friday, February 7, 2014 5:07 PM

All replies