MDT in UEFI Mode Configuration RRS feed

  • Question

  • How can I boot MDT in UEFI Mode ? In my environment Legacy and  UEFI  are there. need Configuration steps.



    Sunday, July 7, 2019 10:37 AM

All replies

  • Sunday, July 7, 2019 11:51 AM
  • If you want to be able to boot to MDT for both legacy and UEFI using the same boot image, you can. I'm going to assume all your hardware is x64 capable since it's been a long time since processors were 32bit only. Use a x64 boot image and if you are booting to a USB flash drive, make sure it is FAT formatted.

    Daniel Vega

    Monday, July 8, 2019 1:41 PM
  • If you are looking to boot in UEFI then you have to prepare a usb stick with fat32 format.

    What exactly do you want. Please elaborate more 

    Wednesday, July 10, 2019 4:30 PM
  • you don't need  a usb stick just the setting in the bios to disable secure boot if want legacy boot and enable secure boot if want uefi boot this how its done in hp and other vendors im talk about pxe booting wds and mdt.

    Thursday, July 11, 2019 10:51 AM