none
MDT Stops capturing after 3470 kb RRS feed

  • Question

  • Hi!

    I am building reference image capture for windows 10 1511 with mdt 2013 Update 2. I build up the Environment on Server 2012 R2 with ADK 10. The Task Sequence is built up and works till it comes to the Capture Image step. This step stops after copying 3470 kb. the Logfile told me, that it has finished the Step successfully. has anybody the same problem - i've searched many sites but i didn*t find a solution. 

    the connection to the capture Share and logs share is fine.

    ----ZTI Backup.log----

    Available space at C:\StateStore: 37674868 ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Backup can use local path ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Property USMTLocal is now = True ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Local store not permitted ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Network store path set to blank ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Network store path set to: \\10.0.1.1\DeploymentShare_WIn10$\Captures ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Backup file name already set to: 1.wim ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Using the backup path: \\10.0.1.1\DeploymentShare_WIn10$\Captures\1.wim ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Validating connection to \\10.0.1.1\DeploymentShare_WIn10$\Captures ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Mapping server share: \\10.0.1.1\DeploymentShare_WIn10$ ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Already connected to server 10.0.1.1 as that is where this script is running from. ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Beginning backup of drive C: ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    About to run command: "\\10.0.1.1\DeploymentShare_WIn10$\Servicing\X64\dism.exe"  /Capture-Image /CaptureDir:C:  /ImageFile:"\\10.0.1.1\DeploymentShare_WIn10$\Captures\1.wim"  /Name:"1CDrive" /Compress:MAX /ConfigFile:"\\10.0.1.1\DeploymentShare_WIn10$\Tools\X64\wimscript.ini" ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    Command has been started (process ID 3456) ZTIBackup 2/19/2016 2:45:02 PM 0 (0x0000)
    ZTI Heartbeat: command has been running for 0 minutes (process ID 3456) ZTIBackup 2/19/2016 2:45:03 PM 0 (0x0000)
      Console > Deployment Image Servicing and Management tool ZTIBackup 2/19/2016 2:45:03 PM 0 (0x0000)
      Console > Version: 10.0.10240.16384 ZTIBackup 2/19/2016 2:45:03 PM 0 (0x0000)
      Console > Saving image ZTIBackup 2/19/2016 2:45:04 PM 0 (0x0000)
      Console > The operation completed successfully. ZTIBackup 2/19/2016 2:45:06 PM 0 (0x0000)
    Return code from command = 0 ZTIBackup 2/19/2016 2:45:06 PM 0 (0x0000)
    Successfully created image of drive C: ZTIBackup 2/19/2016 2:45:06 PM 0 (0x0000)
    ZTIBackup COMPLETED.  Return Value = 0 ZTIBackup 2/19/2016 2:45:06 PM 0 (0x0000)
    ZTIBackup processing completed successfully. ZTIBackup 2/19/2016 2:45:06 PM 0 (0x0000)

    -------ZTI Backup.log end----

    thx for any help

    kind regards Michael

    Tuesday, February 23, 2016 8:43 AM

All replies

  • Hello

    Check this below link 

    https://blogs.technet.microsoft.com/askcore/2009/10/06/how-to-run-a-sysprep-and-capture-task-sequence-from-mdt-2010/

    Regards

    Tuesday, February 23, 2016 9:42 AM
  • Hi!

    I have created many build and captures and all worked fine (win7, win8.1) but now my build and capture of win10 is not working - i have the deployment fundamentals Book from Nyström/Awidmark next to me and created a tasksequence like this in the book - it is working fine until it begins to capture an copying the wim-File - the capture process lasts approx. 3 seconds and copies 3470 KB to the Capture Share - i don*t find a solution :(

    if someone has a fix for this - thx

    kind regards Michael

    Tuesday, February 23, 2016 10:49 AM