Answered by:
SNMP traps from HP NNMi -> SCOM

Question
-
Hi,
We wan't to forward snmp traps from hp nnmi to scom.
I have found a description of a solution for this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/19c29988-dfe8-4918-b0d5-f3124bcfea95/operations-manager-and-hewlett-packard-nnmi?forum=operationsmanagergeneral
I have added a server as snmp device. By using snmptrapgen I have also confirmed that the traps are received from scom.
In NNM I have specified that all traps are to be forwarded to the server which is discovered as a network device. I have also activated the snmp services and set the correct settings. These traps have not been received in scom.
Have I understood this correctly? If NNMi just forwards the traps, will not the traps have source IPs which is not registered as network devices in SCOM, and therefor be discarded?
I would very much like to hear from people how have done a simular type of integration :)
Thanks in advance, Best Regards
Friday, June 13, 2014 5:46 PM
Answers
-
Hi ProSoActive,
Please look at this recent post by Stefan Roth, with a solution to fix SCOM SNMP issues:
http://stefanroth.net/2014/04/07/scom-2012-snmp-traps-how-the-heck-do-i-get-it-working/
Natalya
- Proposed as answer by Natalya Vank Saturday, June 28, 2014 2:00 AM
- Marked as answer by Yan Li_ Tuesday, July 15, 2014 5:55 AM
Sunday, June 15, 2014 7:13 PM
All replies
-
Hi ProSoActive,
Please look at this recent post by Stefan Roth, with a solution to fix SCOM SNMP issues:
http://stefanroth.net/2014/04/07/scom-2012-snmp-traps-how-the-heck-do-i-get-it-working/
Natalya
- Proposed as answer by Natalya Vank Saturday, June 28, 2014 2:00 AM
- Marked as answer by Yan Li_ Tuesday, July 15, 2014 5:55 AM
Sunday, June 15, 2014 7:13 PM -
-
I'm new to SCOM 2012 always used HP products such as NNM, OMW etc. and I need to do the same thing since we're replacing OMW with SCOM 2012 that is getting traps forwarded to SCOM from NNMI. I have been told that SCOM can not discover a windows server as a network device.
So my question is how do I get the traps to SCOM since our NNMI app runs on Windows?
I do have the SNMP configuration working in SCOM.. One app running on linux is sending us traps which is working fine
Friday, August 22, 2014 10:45 AM -
Hi,it was mentioned in
http://social.technet.microsoft.com/Forums/systemcenter/en-US/19c29988-dfe8-4918-b0d5-f3124bcfea95/operations-manager-and-hewlett-packard-nnmi?forum=operationsmanagergeneral
you can use xian snmp device simulator or something like that to add a windows server as SNMP device.
Friday, August 22, 2014 11:39 AM