none
Proper MDT Setup RRS feed

  • Question

  • I have MDT installed and have images built. My ip for mdt is 152.146.74.135

    when i boot a system for a pxe boot it does not pull an ip address even though this is configured in dhcp

    if i place the system onto a different dhcp server i do get a dhcp address.

    what needs to be configured to allow me to see across subnets if i cant pull an ip address on the .74 range? i get an ip on a .54 address range.

    Wednesday, June 15, 2016 11:50 PM

All replies

  • Hi

    You need a IPhelper in your network for the DHCPserver and for the WDS server.

    Kind regards
    Per Larsen
    Twitter: @PerLarsen1975 | Blog: osddeployment.wordpress.com
    If this post is helpful please vote it as Helpful or click Mark for answer.

    Thursday, June 16, 2016 7:05 PM
  • sorry, I cant use iphelper with current network. I might have found a way around it, still searching.
    Wednesday, June 22, 2016 2:20 PM
  • You don't clearly indicate if the DHCP, PXE, and/or MDT servers are in fact one in the same.

    However, yes, if you have a PXE server on one SubNet .74, then clients on the other subnets .75 can't broadcast to the PXE Server subnet, unless you have IPHelpers.

    This is by design.


    Keith Garner - Principal Consultant [owner] - http://DeploymentLive.com

    Thursday, June 23, 2016 3:04 AM
    Moderator