locked
Multiple Edge configurations RRS feed

  • Question

  • Hello!


    Does it possible have one FE Pool for 2 different Edges?

    What configurations should be? Because i'm stuck on MRAS URL pointed to associated Edge then i connect to another edge.

    Main purpose of this solution, to separate Internet access from DMZ 1 and another access from DMZ 2

    some scheme:




    • Edited by Actimele Wednesday, April 29, 2020 3:12 AM
    Wednesday, April 29, 2020 3:10 AM

Answers

  • Hi Actimele,

    This schema is different than the official architecture. We are not sure if it works without problem. 


    Best Regards,
    Sharon Zhao


    Please remember to mark the replies as answers if they helped. If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.


    Thursday, April 30, 2020 10:07 AM

All replies

  • Hi Actimele,

    Do you mean that you want to deploy an Edge pool for Skype for Business server?

    The following diagram shows a typical network topology for a pair of Edge Servers. Each server has two network interfaces which are connected to separate networks which cannot route traffic directly between them outside of the dual-homed Edge servers themselves.

    For more details, please refer to: http://blog.schertz.name/2016/03/skype-for-business-2015-edge-pool-deployment/.

    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.


    Best Regards,
    Sharon Zhao


    Please remember to mark the replies as answers if they helped. If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Wednesday, April 29, 2020 6:44 AM
  • Thx for solution.

    But this cover only one side DMZ. At this configuration external users can connect only to external IP address that will be NATed to public DMZ.

    Some thing like below, One side for Internet users, and another side for federated sites in internal network



    • Edited by Actimele Wednesday, April 29, 2020 12:00 PM Update schema
    Wednesday, April 29, 2020 8:59 AM
  • Hi Actimele,

    This schema is different than the official architecture. We are not sure if it works without problem. 


    Best Regards,
    Sharon Zhao


    Please remember to mark the replies as answers if they helped. If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.


    Thursday, April 30, 2020 10:07 AM