locked
Regarding Management Point URL is not working. RRS feed

  • Question

  • Hi All,

    I have issues in installing SCCM client, the ccmsetup.exe service runs for few minutes and stops after that.

    I tried checking the MP test using below URL's,

    http://servername/SMS_MP/.SMS_AUT?MPCERT

    http://servername/SMS_MP/.SMS_AUT?MPLIST

    The status of the above test is DNS fail.

    The machines which I am testing are in Abhudhabi and Malaysia and my sccm server is in UK.A part from the two location machines ,other machines are working fine.

    Regards,
    Arjun

    Monday, July 6, 2015 11:32 AM

Answers

  • Verify from the following:

    1. connectivity between those machine and SCCM server.
    2. Antivirus and Firewall Ports are Opened and allow connection.
    3. Check Port 53 for DNS.
    4. Check DNS that you can resolve and reach to SCCM using name.

    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog: Technical | Twitter: Mai Ali

    • Proposed as answer by Joyce L Friday, July 17, 2015 9:00 AM
    • Marked as answer by Joyce L Friday, July 17, 2015 9:00 AM
    Monday, July 6, 2015 12:38 PM
  • Hi,

    Have you confirmed that if these clients can communicate with MP server? Ping?  

    And the required ports are opened?

    Technical Reference for Ports Used in Configuration Manager

    Best Regards,

    Joyce


    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Proposed as answer by Joyce L Wednesday, July 15, 2015 8:04 AM
    • Marked as answer by Joyce L Friday, July 17, 2015 9:00 AM
    Wednesday, July 8, 2015 8:50 AM

All replies

  • That issues is not ConfigMgr related then. Make sure that DNS is working. Have you already tried replacing <servername> with the actual IP address (in order to test client to MP communication)?

    Torsten Meringer | http://www.mssccmfaq.de

    Monday, July 6, 2015 12:09 PM
  • Verify from the following:

    1. connectivity between those machine and SCCM server.
    2. Antivirus and Firewall Ports are Opened and allow connection.
    3. Check Port 53 for DNS.
    4. Check DNS that you can resolve and reach to SCCM using name.

    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog: Technical | Twitter: Mai Ali

    • Proposed as answer by Joyce L Friday, July 17, 2015 9:00 AM
    • Marked as answer by Joyce L Friday, July 17, 2015 9:00 AM
    Monday, July 6, 2015 12:38 PM
  • Hi Torsten,

    Tried using IP instead of Server Name in the MP URL.I got "HTTP 403 Forbidden" Error.

    Regards,
    Arjun

    Tuesday, July 7, 2015 10:12 AM
  • Hi,

    Have you confirmed that if these clients can communicate with MP server? Ping?  

    And the required ports are opened?

    Technical Reference for Ports Used in Configuration Manager

    Best Regards,

    Joyce


    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Proposed as answer by Joyce L Wednesday, July 15, 2015 8:04 AM
    • Marked as answer by Joyce L Friday, July 17, 2015 9:00 AM
    Wednesday, July 8, 2015 8:50 AM