CAC in ring topology WAN RRS feed

  • Question

  • Hi,

    I have to apply CAC to a ring topology WAN with 5 sites. The network is build for resiliance if one of the WAN connections are lost, traffic i routed the other way.

    Site 1 is main site, and connected to site 2 and 5, site 2 is connected to site 1 and 3, site 3 is connected to site 2 and 4, etc. Site 3 and 4 is not connected directly to main site.

    Should I define a "dummy" region site, define BW policy of 100kb for each media and assign these to each site, BW policy of what I need and assign these to intersite links or is there another way of doing CAC in this type of network??


    Friday, December 27, 2013 8:55 AM


  • If you will use CAC for all sites you have to configure CAC for all links.

    It is allso possible to define several intersight links to BW policies.

    So I would define the max. bandwidth for Audio/Voice for each WAN link and use intersight links between all sights.

    regards Holger Technical Specialist UC

    • Proposed as answer by Kent-Huang Monday, December 30, 2013 5:13 AM
    • Marked as answer by Lisa.zheng Monday, January 6, 2014 11:49 AM
    Friday, December 27, 2013 5:41 PM

All replies