none
Missing cumulative updates for win 7 & 8.1 and 10 RRS feed

  • Question

  • Hi, When Running the ADR its not picking the cumulative updates for any of the machine. we have around 1500 device.Sccm show that cumulative updates are not required by any device but cumulative updates should be required as its a security update.

    As you can see from the ADR its not listing any updates for cumulative

    When looking at WSUS i can see the cumulative updates and its required on over 500 PC.

    • Edited by lalaJee Wednesday, August 14, 2019 9:15 AM
    Wednesday, August 14, 2019 8:32 AM

All replies

  • Is the same cumulative update showing in SCCM Console ? Do you enable windows 10 product in SUP component

    Check also the scan status. Also ensure latest SSU is installed 

    https://portal.msrc.microsoft.com/en-us/security-guidance/advisory/ADV990001

    Wednesday, August 14, 2019 9:32 AM
  • Is the same cumulative update showing in SCCM Console ? Do you enable windows 10 product in SUP component

    Check also the scan status. Also ensure latest SSU is installed 

    https://portal.msrc.microsoft.com/en-us/security-guidance/advisory/ADV990001

    Sccm show the update but required has 0

    Windows 10, 7 and 8.1 is select in the sup

    Wednesday, August 14, 2019 10:17 AM
  • Run the synchronize software update from all updates and check again.

    Also verify the SCCM scan status of windows 10 machines

     
    Wednesday, August 14, 2019 10:36 AM
  • What's shown as required in WSUS is irrelevant and the fact that any updates are shown as required in WSUS at all is indicative of a possible configuration issue in your environment as this is not expected by default.

    Are you sure that your clients are properly configured to use ConfigMgr for software updates at all?

    Have you reviewed wuahandler.log on your clients to validate?


    Jason | https://home.configmgrftw.com | @jasonsandys

    Wednesday, August 14, 2019 12:35 PM
  • You have a strange search criteria (title) , change that and you will see the updates

    Regards

    Johan


    • Edited by Johan Erven Wednesday, August 14, 2019 1:15 PM spelling
    Wednesday, August 14, 2019 1:14 PM
  • Hi,

    First, when managing clients through SCCM, we will not see below information in the WSUS. So, the configuration may have some problems, we can try to reinstall the WSUS.

    Then, as Johan mentioned, cumulative update is not included in the ADR title, so it also does not show cumulative updates. You can remove the title to avoid missing updates.

    Best Regards,
    Tina 


    Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Thursday, August 15, 2019 7:35 AM
  • Thank you all for your help.

    Its working fine now. After modify Software Update Point then I did put the SUP back to orginal settings, its start working fine.

    Now i can see all of the updates.

    • Proposed as answer by Rolf Lidvall Friday, August 16, 2019 12:48 PM
    Thursday, August 15, 2019 11:20 AM
  • What's shown as required in WSUS is irrelevant and the fact that any updates are shown as required in WSUS at all is indicative of a possible configuration issue in your environment as this is not expected by default.

    Are you sure that your clients are properly configured to use ConfigMgr for software updates at all?

    Have you reviewed wuahandler.log on your clients to validate?


    Jason | https://home.configmgrftw.com | @jasonsandys

    Clients do point to right sccm server
    Thursday, August 15, 2019 11:22 AM
  • Run the synchronize software update from all updates and check again.

    Also verify the SCCM scan status of windows 10 machines

     
    I run synchronize  few times
    Thursday, August 15, 2019 11:22 AM
  • You have a strange search criteria (title) , change that and you will see the updates

    Regards

    Johan


    I did remove that but still didnt make any issue
    Thursday, August 15, 2019 11:23 AM
  • Hi,

    First, when managing clients through SCCM, we will not see below information in the WSUS. So, the configuration may have some problems, we can try to reinstall the WSUS.

    Then, as Johan mentioned, cumulative update is not included in the ADR title, so it also does not show cumulative updates. You can remove the title to avoid missing updates.

    Best Regards,
    Tina 


    Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Even on brand new build sccm everiment i see same settings, i think Wsus still get the information.
    Thursday, August 15, 2019 11:23 AM
  • Even on brand new build sccm everiment i see same settings, i think Wsus still get the information.

    No, not by default. You must select the option in the SUP component properties of the site to forward reporting events to WSUS. Doing this has little to no value though and thus its generally recommended not to do this and to leave the default option selected to not forward events to WSUS.


    Jason | https://home.configmgrftw.com | @jasonsandys

    Thursday, August 15, 2019 12:41 PM
  • Even on brand new build sccm everiment i see same settings, i think Wsus still get the information.

    No, not by default. You must select the option in the SUP component properties of the site to forward reporting events to WSUS. Doing this has little to no value though and thus its generally recommended not to do this and to leave the default option selected to not forward events to WSUS.


    Jason | https://home.configmgrftw.com | @jasonsandys

    Can you please let me know how i can remove this or set it so its not passing the information to the Wsus
    • Proposed as answer by Rolf Lidvall Friday, August 16, 2019 12:44 PM
    • Unproposed as answer by Rolf Lidvall Friday, August 16, 2019 12:44 PM
    Friday, August 16, 2019 9:52 AM
  • It's at the bottom of the Sync Settings page of the Software Update Point Component Properties dialog. See https://docs.microsoft.com/en-us/sccm/sum/get-started/install-a-software-update-point#synchronization-source

    Jason | https://home.configmgrftw.com | @jasonsandys

    Friday, August 16, 2019 12:33 PM