locked
Server Manager Performance Counters Won't Start on Single Server RRS feed

  • Question

  • Good morning, everyone.

    I have a Windows Server 2012 R2 Data Center I am using to setup a central administration point for all of our Windows servers. I have one Windows Server 2008 R2 server that does not want to comply. Every other server simply required an install of the following items.

    • Microsoft .NET Framework 4.0 (In our case 4.5.2)
    • Windows Remote Management 3.0 (Afterwards reboot, login, go to cmd Run-As Administrator: winrm quickconfig)

    No matter what I get the following error.

    "The Server Manager Performance Monitor collector could not be disabled. Error: -2147023838"

    I cannot find anything regarding this error and how to resolve it. I can't track the error back to its point of origination.

    Any help would be wildly appreciated!

    Wednesday, May 25, 2016 4:27 PM

Answers

  • Hi,

    Thanks for your post.

    According to my research and the situation, I would like to recommend the following suggestions:

    1.Please try to set the Sets to run under the Local System account(Run as..).

    2.Please open the data collector set Properties and click Stop Condition tab, then check if configure some Stop Condition settings.

    3.Please try to delete the sets and reboot the server, then create a new sets manually and test again.

    In addition, please also open Event Viewer and check if find some relevant events.

    Article for your reference:

    Windows Server 2012 - Server Manager Troubleshooting Guide, Part I: Overview

    http://social.technet.microsoft.com/wiki/contents/articles/13443.windows-server-2012-server-manager-troubleshooting-guide-part-i-overview.aspx

    Best Regards,

    Alvin Wang


    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by CKsjusd Tuesday, May 31, 2016 6:07 PM
    Friday, May 27, 2016 6:43 AM

All replies

  • Hi,

    Thanks for your post.

    According to my research and the situation, I would like to recommend the following suggestions:

    1.Please try to set the Sets to run under the Local System account(Run as..).

    2.Please open the data collector set Properties and click Stop Condition tab, then check if configure some Stop Condition settings.

    3.Please try to delete the sets and reboot the server, then create a new sets manually and test again.

    In addition, please also open Event Viewer and check if find some relevant events.

    Article for your reference:

    Windows Server 2012 - Server Manager Troubleshooting Guide, Part I: Overview

    http://social.technet.microsoft.com/wiki/contents/articles/13443.windows-server-2012-server-manager-troubleshooting-guide-part-i-overview.aspx

    Best Regards,

    Alvin Wang


    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by CKsjusd Tuesday, May 31, 2016 6:07 PM
    Friday, May 27, 2016 6:43 AM
  • I should have known better. Upon further inspection, the data sets were fine. I made the changes. Nothing worked. For whatever reason though someone had disabled the services.

    Tuesday, May 31, 2016 6:07 PM