none
DPM 2010 Recovery Point RRS feed

  • Question

  • hi

    1.We have Recovery point created on the DISKS now i want to move all the recovery point to the TAPE so how to achieve this.

    2.After moving to TAPE whether it is possible to recover the Data.

    Wednesday, March 7, 2012 11:09 AM

Answers

  • hi

    i have found the solution:

    go to Recovery point --> open the content --> right click --> recover --> select coy to Tape.


    • Edited by SPV4645 Thursday, March 8, 2012 6:09 AM
    • Proposed as answer by Arjun1985 Thursday, March 8, 2012 6:11 AM
    • Marked as answer by SPV4645 Tuesday, March 13, 2012 10:50 AM
    Thursday, March 8, 2012 6:09 AM
  • Hello SPV,

    you can give a try for the below options.

    Open recovery point --> recover --> original location, alternate location and copy to tape.

    Thanks

    Sunny

    • Marked as answer by SPV4645 Tuesday, March 13, 2012 10:50 AM
    Monday, March 12, 2012 10:22 AM

All replies

  • Hi,

    to protect on TAPE data already protecting on disk you need to modify your protection group and add a long term backup strategy and specify that you want it on tape. Then follow the wizard to specify the frequency and retention range for your long term.

    Then on your recovery tab you will have all the RP that will be present and you'll select the one you want to restore.

    Wednesday, March 7, 2012 11:13 AM
  • hi

    i wanted to move/copy the recovery points which is there on the disk has to be moved to TAPE is there any procedure to achieve this requirement.

    Wednesday, March 7, 2012 12:03 PM
  • hi

    i have found the solution:

    go to Recovery point --> open the content --> right click --> recover --> select coy to Tape.


    • Edited by SPV4645 Thursday, March 8, 2012 6:09 AM
    • Proposed as answer by Arjun1985 Thursday, March 8, 2012 6:11 AM
    • Marked as answer by SPV4645 Tuesday, March 13, 2012 10:50 AM
    Thursday, March 8, 2012 6:09 AM
  • Hello SPV,

    you can give a try for the below options.

    Open recovery point --> recover --> original location, alternate location and copy to tape.

    Thanks

    Sunny

    • Marked as answer by SPV4645 Tuesday, March 13, 2012 10:50 AM
    Monday, March 12, 2012 10:22 AM