locked
UAG Terede secondary socket RRS feed

  • Question

  • Hi,

    Got this issue when doing

    netsh int teredo show state on UAG SP1

    Teredo Parameters

    -----------------------------------------------

    Type: server

    Virtual Server IP : public ip here

    Client Refresh Interval : 30 seconds

    State : offline

    Error : Unable to open secondary socket

    The WAN interface has 2 public ip's. Because of this i can't activate DA. I never seen this error before.

    Anyone?


    Ivan If this post answered your question, Mark As Answer If this post was helpful, Vote as Helpful

    Sunday, February 12, 2012 7:00 PM

All replies

  • Hi

    Are you sure that your second IP Address is reachable from Internet on UDP 3544 port? Are you sure that your WAN interface have a public firewall profile?


    BenoitS - Simple by Design http://danstoncloud.com/blogs/simplebydesign/default.aspx

    Sunday, February 12, 2012 7:58 PM
  • Hi,

    Thanks for answer.

    How to verify the public fw profile? THis is the manual rule in TMG right?

    Ivan


    Ivan If this post answered your question, Mark As Answer If this post was helpful, Vote as Helpful

    Sunday, February 12, 2012 8:15 PM
  • No, just open the Network and Sharing center and see what profiles are applied to the interface.

    I think Benoit is talking about an ongoing issue with NLA. If the external adapter - at some point in time - have been able to reach the internal domain thinks it is on the internal network. This causes UAG activation failure.

    Have a look at the following blogpost

    http://blogs.technet.com/b/tomshinder/archive/2010/05/27/uag-directaccess-quot-the-adapter-configured-as-external-facing-is-connected-to-a-domain-quot.aspx

    Don't know if this is what you are seeing, the errormessage should in that case clearly point to that.


    Hth, Anders Janson Enfo Zipper

    Monday, February 13, 2012 9:22 AM