locked
Check lists Migration Lync 2010 to SFB RRS feed

  • Question

  • Hi,

    Any one can share about the check lists to make sure that the side by side migration Lync 2010 to SfB 2015 was properly?

    Thank you.
    Sinjo

    Tuesday, September 25, 2018 2:32 AM

Answers

  • Hi Sinjo,

    The guide provided above applies to migrate from Lync server 2010 to SFB server 2015 as well.

    And to verify the migration is made successfully, you could refer to the following steps.

    Use the administrative account to log on to the computer where Skype for Business Server Control Panel is installed.

    Start SFB control panel, In the left navigation bar, click Topology, and then confirm that the service status shows a computer with a green arrow and that a green check mark for replication status is next to each Skype for Business Server role that has been deployed and brought online.

    Moreover, here is some advice on running cmdlets via powershell:

    • Run Test-CsDatabase cmdlet as Admin in Powershell to verify the connectivity to one or more Skype for Business Server databases.
    • Run the Get-CsManagementStoreReplicationStatus on the server which has the Central Management store. If it returns a False status after running this command, just try running the Invoke-CsManagementStoreReplication cmdlet, give it some time to complete the replication, and then run the Get-CsManagementStoreReplicationStatus cmdlet again.
    • If you have RGS enabled, please run Get-CsRgsAgentGroup to check the information about the Response Group agent groups
    • Do you have the Dialin Conference Access Number? You can run “Get-CsApplicationEndpoint” to check the related information.

    If you want to move it, please run Move-CsApplicationEndpoint -Identity “primaryURI” -Target “fqdntargetpool”

    • And for CallParkService, after move it, please try to run Get-CsCallParkOrbit to check “CallParkService” to check pool’s FQDN and make sure it is enabled in the SFB 2015 server


    Kind regards,

    Calvin Liu


    Please remember to mark the reply as an answer if you find it is helpful. It will assist others who has similar issue. If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Click here to learn more. Visit the dedicated forum to share, explore and talk to experts about Microsoft Teams.


    • Edited by Calvin-Liu Wednesday, September 26, 2018 8:11 AM
    • Proposed as answer by Calvin-Liu Friday, September 28, 2018 9:38 AM
    • Marked as answer by SinjoSB Monday, October 1, 2018 6:53 AM
    Wednesday, September 26, 2018 8:05 AM

All replies

  • Hey Hi !

    Upgrading from Lync Server 2010 to Skype for Business Server 2015 is similar to upgrading from Lync Server 2010 to Lync Server 2013. See the Migration from Lync 2010 to Lync 2013 

    Check lists as below,


    Neeranjan Shettar (MyPage)

    [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or click Answered "Vote as helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer faster. ]

    Tuesday, September 25, 2018 6:24 AM
  • Hi Neeranjan,

    Beside the check lists above, and since i already completed the SFB installation and the all users were moved from Lync 2010 to SfB, is there something  such as command to run or tools to make sure that migration was properly done?

    Thanks.
    Sinjo

    Wednesday, September 26, 2018 4:13 AM
  • Hi Sinjo,

    The guide provided above applies to migrate from Lync server 2010 to SFB server 2015 as well.

    And to verify the migration is made successfully, you could refer to the following steps.

    Use the administrative account to log on to the computer where Skype for Business Server Control Panel is installed.

    Start SFB control panel, In the left navigation bar, click Topology, and then confirm that the service status shows a computer with a green arrow and that a green check mark for replication status is next to each Skype for Business Server role that has been deployed and brought online.

    Moreover, here is some advice on running cmdlets via powershell:

    • Run Test-CsDatabase cmdlet as Admin in Powershell to verify the connectivity to one or more Skype for Business Server databases.
    • Run the Get-CsManagementStoreReplicationStatus on the server which has the Central Management store. If it returns a False status after running this command, just try running the Invoke-CsManagementStoreReplication cmdlet, give it some time to complete the replication, and then run the Get-CsManagementStoreReplicationStatus cmdlet again.
    • If you have RGS enabled, please run Get-CsRgsAgentGroup to check the information about the Response Group agent groups
    • Do you have the Dialin Conference Access Number? You can run “Get-CsApplicationEndpoint” to check the related information.

    If you want to move it, please run Move-CsApplicationEndpoint -Identity “primaryURI” -Target “fqdntargetpool”

    • And for CallParkService, after move it, please try to run Get-CsCallParkOrbit to check “CallParkService” to check pool’s FQDN and make sure it is enabled in the SFB 2015 server


    Kind regards,

    Calvin Liu


    Please remember to mark the reply as an answer if you find it is helpful. It will assist others who has similar issue. If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Click here to learn more. Visit the dedicated forum to share, explore and talk to experts about Microsoft Teams.


    • Edited by Calvin-Liu Wednesday, September 26, 2018 8:11 AM
    • Proposed as answer by Calvin-Liu Friday, September 28, 2018 9:38 AM
    • Marked as answer by SinjoSB Monday, October 1, 2018 6:53 AM
    Wednesday, September 26, 2018 8:05 AM
  • Agree with Calvin..

    Neeranjan Shettar (MyPage)

    [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or click Answered "Vote as helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer faster. ]

    Wednesday, September 26, 2018 8:15 AM
  • Hi Sinjo,

     

    Is there any update or other assistance you may need on this query?

    If the reply gives you some help, please try to mark it as an answer since it will help others who has similar issue. :)

    Kind regards,

    Calvin Liu


    Please remember to mark the reply as an answer if you find it is helpful. It will assist others who has similar issue. If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Click here to learn more. Visit the dedicated forum to share, explore and talk to experts about Microsoft Teams.

    Friday, September 28, 2018 9:40 AM
  • Hi Calvin,

    Sorry, i plan to do it tomorrow.

    Regards,
    Sinjo

    Sunday, September 30, 2018 3:23 PM
  • Hi Calvin,

    I already done the commands via PowerShell. Everything is ok.

    Thank you.

    Regards,

    Sinjo

    Monday, October 1, 2018 6:55 AM