none
Starting windows 10 become slow RRS feed

  • Question

  • I enabled bitlocker and did not like that the boot become slow so I removed it from my c drive (ssd) but boot is still slow , please tell me how I should fix this ?
    Monday, January 21, 2019 10:35 PM

All replies

  • Hi wel123,

    Thanks for posting your query.

    Which stage of the boot process takes a long time? 

    To troubleshoot whether the issue is related to a third party service, please check the symptom in a clean boot environment. 

    https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

    Please refer to this article to fix Slow boot: https://www.makeuseof.com/tag/windows-10-slow-boot-issues/

    Note: This is a third-party link and we do not have any guarantees on this website. This is just for your convenience. And Microsoft does not make any guarantees about the content.

    Best regards,

    Yilia 


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Tuesday, January 22, 2019 7:19 AM
    Moderator
  • It take long time while the dots circle animate before the login screen.
    Tuesday, January 22, 2019 5:17 PM
  • I checked all startup apps they are the same no change it is really the bitlocker who screw my boot speed now it is like old hdd time :(
    Tuesday, January 22, 2019 10:08 PM
  • Hi wel123,

    Thanks for your reply. 

    Have a look at this article to make sure you have removed the Bitlocker: 

    http://users.isr.ist.utl.pt/~mbayat/hacks/how-to-remove-bitlocker-encryption-in-windows-10/

    Note: This is a third-party link and we do not have any guarantees on this website. This is just for your convenience. And Microsoft does not make any guarantees about the content.

    1. Please run the following commands to check if there is any system file corrupted: 

    sfc /scannow 

    Dism /Online /Cleanup-Image /CheckHealth
     
    Dism /Online /Cleanup-Image /ScanHealth
     
    Dism /Online /Cleanup-Image /restoreHealth

    2. If the issue still occurs, you would consider recovering your computer: 

    https://support.microsoft.com/en-us/help/12415/windows-10-recovery-options

    Best regards,

    Yilia 


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.



    Wednesday, January 23, 2019 7:10 AM
    Moderator
  • Volume C: [Evo 850]
    [OS Volume]
    
        Size:                 930.56 GB
        BitLocker Version:    None
        Conversion Status:    Fully Decrypted
        Percentage Encrypted: 0.0%
        Encryption Method:    None
        Protection Status:    Protection Off
        Lock Status:          Unlocked
        Identification Field: None
        Key Protectors:       None Found
    
    
    
    
    Dism /Online /Cleanup-Image /restoreHealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    Image Version: 10.0.17134.556
    
    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.

    Wednesday, January 23, 2019 9:49 PM
  • I always get corrupted data from scannow dont know why
    Wednesday, January 23, 2019 9:50 PM
  • boot still slow. I can not do a restore because I dont use system restore, I wish I never used bitlocker. If you I used reset will I lose any files ? I tried now and I choose keep files but it appear that some apps will be removed I dont know why

    any other option ?


    • Edited by wel123 Wednesday, January 23, 2019 9:55 PM
    Wednesday, January 23, 2019 9:55 PM
  • Hi,

    May I know the conclusion after you run sfc?

    Reset and choose keep files will removes any apps your PC manufacturer installed. (If your PC came with Windows 10, apps from your PC manufacturer will be reinstalled.)

    You can try Restore from a system restore point: This option takes your PC back to an earlier point in time, called a system restore point. Restore points are generated when you install a new app or driver, and when you create a restore point manually. Restoring won’t affect your personal files, but it will remove apps, drivers, and updates installed after the restore point was made.

    https://support.microsoft.com/en-us/help/12415/windows-10-recovery-options#section1

    Best regards,

    Yilia 


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.



    Thursday, January 24, 2019 4:24 AM
    Moderator
  • Verification 100% complete.
    
    Windows Resource Protection found corrupt files and successfully repaired them.
    For online repairs, details are included in the CBS log file located at
    windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. For offline
    repairs, details are included in the log file provided by the /OFFLOGFILE flag.

    log file download:

    https://mega.nz/#!mDAQxSCQ!8kCfYnqFRBdH0dtFc5pB6NclmYq_liBRt9LxOZclRxE

    Thanks alot Yilia for your help.

    Thursday, January 24, 2019 5:38 PM
  • Is there a way to check loaded drivers so I can disable them manually ?
    Thursday, January 24, 2019 5:39 PM
  • Last restore point was in 16/1 and at this time I think I was still using bitlocker.
    Thursday, January 24, 2019 5:52 PM
  • I checked now startup apps and I found viber take 6.5 seconds to load so I uninstalled it but no difference at all !!
    Thursday, January 24, 2019 6:45 PM
  • For deep analyze, please follow the steps below to collect the xperf log:

    1. Download xperf tool to the affected machine and unzip to the C:\ (C:\XPERF): 

    2. On the “local” machine open an elevated command prompt. 

    3. Browse to the SysInternal tools folder.
    a. You’ll need the PSEXEC tool (https://docs.microsoft.com/en-us/sysinternals/downloads/psexec)

    4. Run psexec.exe \\<affected machine name> cmd.exe and  browse to C:\XPERF by cd C:\XPERF.

    5. Start Data collection by running XPERF_Start.bat

    6. Reproduce the issue!!

    7. Stop data collection by running XPERF_Stop.bat

    8. Please zip the "Logs" folder from C:\XPERF and Upload it to the OneDrive and post here.

    Best regards,

    Yilia 


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.





    Friday, January 25, 2019 8:12 AM
    Moderator
  • Please another resource to download xperf I can not login with my email it give me an error
    Friday, January 25, 2019 10:33 PM
  • please help any alternative download source ?
    Monday, January 28, 2019 5:46 PM
  • you can use the Windows Performance Recorder to create a trace:
    Windows Performance Recorder
    Monday, January 28, 2019 9:56 PM
  • Please refer to this:

    https://docs.microsoft.com/en-us/windows-hardware/get-started/adk-install

    it included in Windows performance Toolkit.


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.



    Tuesday, January 29, 2019 8:37 AM
    Moderator
  • installed and xperf.exe exists but I can not find XPERF_Start.bat or XPERF_Stop.bat. Where I can find theme ?
    Tuesday, January 29, 2019 4:07 PM
  • run command as an administrator, then run XPERF_Start.bat or XPERF_Stop.bat.

    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Wednesday, January 30, 2019 1:47 AM
    Moderator
  • What command ? please explain again in more details I can not find XPERF_Start.bat or XPERF_Stop.bat.
    Wednesday, January 30, 2019 10:10 AM
  • Wednesday, January 30, 2019 10:47 AM
  • Please help
    Thursday, January 31, 2019 8:43 PM
  • you could use Windows Performance Recorder, Perfromance Scenario - Boot
    to create the trace.
    Thursday, January 31, 2019 9:09 PM
  • I did that and my windows start into BSOD and I had to start into safemode and stop the recorder. Now the recorder made 4 GB file I dont have good upload speed to upload this file so I compressed it to 250 MB. here it is:

    https://mega.nz/#!rKQUxYKD!VfxNRxGKrySdGkB57xhq5iLQHfFdcDf5jsU5yAKyxo0

    please advise what is the problem ?

    Thursday, January 31, 2019 11:47 PM
  • your logon is after 23 seconds.
    So what exactly do you understand under a slow boot?

    As for the Bluescreen: share the dump file.
    But having a "Killer" network card is certainly not going to help with system stability.

    Why do you use Virtual CloneDrive?

    Friday, February 1, 2019 9:25 AM
  • No more BSOD since I disabled the recorder. My concern now how I reduce boot time. My system was booting in like 10 sec I am using SSD. can you please tell me what it take that long and how to reduce it ?



    • Edited by wel123 Friday, February 1, 2019 12:03 PM
    Friday, February 1, 2019 11:47 AM
  • in the first 7 seconds, these drivers are loaded:

    Series
     [Root] 4
       |- ntoskrnl.exe!<Symbols disabled> 5
       |- bcmwlhigh664.sys!<Symbols disabled> 6
       |- SamsungRapidDiskFltr.sys!<Symbols disabled> 7
       |- VClone.sys!<Symbols disabled> 8

    So I would uninstall Virtual CloneDrive and Samsung Magician.

    autochk.exe is running for 4 seconds (from 8s to 12s) : run checkdisk /f manually.
    Is there some event logged for drive problems?

    Friday, February 1, 2019 12:44 PM
  • Thanks alot EckiS . I was booting fast with virtual clone and samsung magician , the last one enable SSD rapid mode to make it even faster however I will uninstall and try

    what is autochk.exe ? and how to disable ? I dont find it in the startup

    what you mean event logged for drive problems?

    Thanks again

    Friday, February 1, 2019 12:54 PM
  • autochk is runs when file system errors were found.
    Friday, February 1, 2019 1:36 PM
  • boot take now 1 minutes and 10 sec from appear of windows logo to login screen !! any advise ?
    Friday, February 1, 2019 2:22 PM
  • So worse than when you created the Trace?
    Friday, February 1, 2019 2:40 PM
  • it is the same I used my phone stop watch
    Friday, February 1, 2019 2:43 PM
  • In your Trace it took only 23 seconds to login.
    Friday, February 1, 2019 2:49 PM
  • 23 sec is not true, the windows boot looks like it stop loading for 1 minute until it resume again and it seems the trace did not record that, this is why I complain
    Friday, February 1, 2019 3:02 PM
  • 23 sec is the safemode login time because after I enabled the recorder I could not login because of blue screen
    Friday, February 1, 2019 3:23 PM
  • here is the event picture

    Friday, February 1, 2019 8:47 PM
  •  EventData 
    
      BootTsVersion 2 
      BootStartTime 2019-02-01T20:23:29.029447200Z 
      BootEndTime 2019-02-01T20:25:18.984717500Z 
      SystemBootInstance 453 
      UserBootInstance 451 
      BootTime 82979 
      MainPathBootTime 13279 
      BootKernelInitTime 39 
      BootDriverInitTime 441 
      BootDevicesInitTime 4344 
      BootPrefetchInitTime 0 
      BootPrefetchBytes 0 
      BootAutoChkTime 0 
      BootSmssInitTime 3448 
      BootCriticalServicesInitTime 121 
      BootUserProfileProcessingTime 463 
      BootMachineProfileProcessingTime 53 
      BootExplorerInitTime 3552 
      BootNumStartupApps 4 
      BootPostBootTime 69700 
      BootIsRebootAfterInstall false 
      BootRootCauseStepImprovementBits 0 
      BootRootCauseGradualImprovementBits 0 
      BootRootCauseStepDegradationBits 0 
      BootRootCauseGradualDegradationBits 0 
      BootIsDegradation false 
      BootIsStepDegradation false 
      BootIsGradualDegradation false 
      BootImprovementDelta 0 
      BootDegradationDelta 0 
      BootIsRootCauseIdentified false 
      OSLoaderDuration 904 
      BootPNPInitStartTimeMS 39 
      BootPNPInitDuration 5099 
      OtherKernelInitDuration 111 
      SystemPNPInitStartTimeMS 5193 
      SystemPNPInitDuration 397 
      SessionInitStartTimeMS 5608 
      Session0InitDuration 1441 
      Session1InitDuration 407 
      SessionInitOtherDuration 1599 
      WinLogonStartTimeMS 9056 
      OtherLogonInitActivityDuration 153 
      UserLogonWaitDuration 9638 
    


    Friday, February 1, 2019 8:56 PM
  • Friday, February 1, 2019 10:26 PM
  • you can download bootlog for process monitor from here:

    https://mega.nz/#!OXJEGa6Q!rl3V39Lot1hPc2ODeu1kXSuDa2vygfGXn1B50ifM9WI

    Saturday, February 2, 2019 12:13 AM
  • Admittedly, I only read the OP not, all the replies.

    Couple suggestions:

    > Task Mgr > Start-up (tab).  Have as little running @ start-up as possible & certainly, not high-impact stuff.

    Check for any malware.

    Eliminate any junk, unnecessary files.

    Cheers,
    Drew

    Drew - IT Pro / MS Partner/Partner Company / Windows Insider / Owner - Computer Issues

    Saturday, February 2, 2019 8:09 AM
  • @EckiS

    I just realize it was taken when I booted in safe mode because when I run the recorder as you said I get blue screens, if you have precious time then stop posting here

    • Edited by wel123 Saturday, February 2, 2019 3:30 PM
    Saturday, February 2, 2019 3:28 PM
  • Drew

    I tried all these.

    Saturday, February 2, 2019 3:51 PM
  • Have you, also, tried Reset

    Cheers,
    Drew

    Drew - IT Pro / MS Partner/Partner Company / Windows Insider / Owner - Computer Issues


    • Edited by Drew1903 Tuesday, February 5, 2019 10:09 PM
    Tuesday, February 5, 2019 10:09 PM
  • No because I have many apps installed and configured , as this will remove all apps ?
    Tuesday, February 5, 2019 10:19 PM
  • It can be done where it keeps or leaves all personal data intact.  User installed & non-default items will, indeed, need to be reloaded.

    Another thought I considered when I asked about Reset is System Restore... if you can do that to a date before you had your problem it doesn't mean re-installing anything..

    At least, I didn't suggest you rebuild the OS from scratch; was tempted.  Just trying to think of ways that might help remedy your situation...

    Sometimes one must do what one must do; may include some resetting things they had.  Not being glib., at all.  Fully appreciate how unappealing or unexciting that often is.

    Cheers,
    Drew

    Drew - IT Pro / MS Partner/Partner Company / Windows Insider / Owner - Computer Issues

    Wednesday, February 6, 2019 1:48 AM