none
Failing capture - file being used by another process. RRS feed

  • Question

  • Hi there.

    So i have a IBM system x 3550 m4 booting from SAN Windows server 2012.

    I'm trying to capture an image using MDT 2012 installed on windows server 2008 r2.

    The first try to capture failed because of lack of proper network driver in WinPE. So i've managed to boot again in the system (the PE after restart was giving me a 0xc000000f bsod). I've put drivers into boot image and started a second attempt to capture.

    There was a strange thing: the process was stuck very long on bcdedit sub-tasks (as were lagging the interactive bcdedit calls i've tried to do from command line). But nevertheless it managed to reboot and almost finished capturing but crashed at 83% with the following in log:

    <![LOG[  Console > [  82% ] Capturing progress: 1:03 mins remaining ]LOG]!><time="17:38:08.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  83% ] Capturing progress: 56 secs remaining ]LOG]!><time="17:38:20.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [ ERROR ] C:\Windows\WinSxS\Manifests\amd64_nvraid.inf_31bf3856ad364e35_6.2.9200.16384_none_92a46a8c48c2da5e.manifest (Error = 32)]LOG]!><time="17:38:52.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [ ERROR ] C:\Windows\WinSxS\Manifests\amd64_policy.1.2.microsof..op.security.azroles_31bf3856ad364e35_6.2.9200.16384_none_4583aaacb524ff52.manifest (Error = 32)]LOG]!><time="17:38:52.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Error imaging drive [C:\]]LOG]!><time="17:38:53.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > The process cannot access the file because it is being used by another process.]LOG]!><time="17:38:53.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Return code from command = 2]LOG]!><time="17:38:53.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Error creating an image of drive C:, rc = 2]LOG]!><time="17:38:53.000+000" date="02-04-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    <![LOG[Event 41036 sent: Error creating an image of drive C:, rc = 2]LOG]!><time="17:38:54.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTIBackup COMPLETED.  Return Value = 2]LOG]!><time="17:38:54.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2]LOG]!><time="17:38:54.000+000" date="02-04-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    <![LOG[Event 41002 sent: ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2]LOG]!><time="17:38:54.000+000" date="02-04-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">

    I assume it happens because of something not clean from 1st capture attempt, no?

    How can i fix this? 

    Thanks.



    http://about.me/bromi


    • Edited by bromi Tuesday, February 4, 2014 2:10 PM
    Tuesday, February 4, 2014 2:08 PM