locked
Client Access Role Installation Error RRS feed

  • Question

  • Hi Guys!

    Any ideas how to fix this error? Mailbox and Hub installed already in the server.

    Summary: 3 item(s). 1 succeeded, 1 failed.
    Elapsed time: 00:00:12


    Preparing Setup
    Completed

    Elapsed Time: 00:00:00


    Client Access Role
    Failed

    Error:
    The following error was generated when "$error.Clear(); Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"" was run: "Process execution failed with exit code 1062.".

    Process execution failed with exit code 1062.

    Elapsed Time: 00:00:11


    Finalizing Setup
    Cancelled

    Thanks /

    LRMCP

     

    Friday, June 25, 2010 11:29 AM

Answers

  • hey...it's not just that, i just don't like somebody will post on my thread proposing irrelevant answer, an assertive discussion would be a good point...

    I apologize if I tried to help you based on my experiences,as I said restarting the setup will do the trick however thanks again for your kind words, as I said maybe another expert will try helping you out.

    Have a nice day


    Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://busbar.blogspot.com or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer
    Friday, June 25, 2010 1:40 PM
  • Hi LRMCP,

    I've seen this same problem. Long story short: The problem was resolved by removing the Non-http Activation feature in .Net Framework.

    You might want to give it a try.

    Make sure you have this one installed too:
    http://support.microsoft.com/default.aspx?scid=kb%3bEN-US%3b975443

    Non-http activation is part of the WCF and it is not used by any role of Exchange 2010

    Thanks,


    sabues
    • Marked as answer by LRMCP Saturday, July 3, 2010 2:07 PM
    Thursday, July 1, 2010 4:10 PM
  • Hi All,

    Thank you for your replies, this has been resolved by the following:

    1. Un-install the server roles in using

    2. Remove the "Non-http Activation feature in .Net Framework", once this service feature will be remove, the "Question Mark in the Globe icon of the Default Web Site".

    3. Install the "CAS Role"

    Thanks /

    LRMCP

     

    • Marked as answer by LRMCP Saturday, July 3, 2010 2:07 PM
    Saturday, July 3, 2010 2:07 PM

All replies

  • it looks like the time taken to restart IIS taken so long, what is the HW config you run, verify that you have good connectivity to AD and try again
    Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://busbar.blogspot.com or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer
    Friday, June 25, 2010 11:31 AM
  • hi,

    restart iis manually. type iisreset /noforce to run and enter. after this try to install CAS again.

    regards,

     


    Mumin CICEK | Exchange - MVP | www.cozumpark.com | www.mumincicek.com
    Friday, June 25, 2010 11:37 AM
  • Hi,

    Thanks for the prompt reply, yes are right it has something to deal with the IIS, I dont have a problem with regards to DCDIAG and NETDIAG. I just wonder why is it during the installation when this service will be restarted, it suddenly failed /stop.

    Thanks/

    LRMCP

    Friday, June 25, 2010 11:39 AM
  • Hi,

    Mumin, the service usually restarted during the installation process of the client access server role so doing that manually is just like you are chasing the installation process.

    Thanks /

    LRMCP

    Friday, June 25, 2010 11:41 AM
  • sometimes it times out with no apparent reason
    Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://busbar.blogspot.com or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer
    Friday, June 25, 2010 11:49 AM
  • Hi Busbar,

    Any supporting technical documents on that? If that's the case then all Exchange Server 2010 Client Access role will not be installed. Do not proposed that as an answer by means of your gut feeling.

    Thanks /

    LRMCP

     

     

    Friday, June 25, 2010 12:05 PM
  • Hi LRM,

    I faced it during the installation in some customer, and as the link said this is proposed answer feel free to accept it or not!


    Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://busbar.blogspot.com or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer
    Friday, June 25, 2010 1:07 PM
  • It's easy to say that you faced / experienced the problem with some customer, I need a proof or solution to that issue! There's a reason why it stop and wont start during the installation process and don't just give such kind of reasoning "sometimes it times out with no apparent reason" and proposing that as an answer?

    Friday, June 25, 2010 1:17 PM
  • maybe another expert can advice you more than me and you will be happy then
    Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://busbar.blogspot.com or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer
    Friday, June 25, 2010 1:19 PM
  • hey...it's not just that, i just don't like somebody will post on my thread proposing irrelevant answer, an assertive discussion would be a good point...

    Friday, June 25, 2010 1:35 PM
  • hey...it's not just that, i just don't like somebody will post on my thread proposing irrelevant answer, an assertive discussion would be a good point...

    I apologize if I tried to help you based on my experiences,as I said restarting the setup will do the trick however thanks again for your kind words, as I said maybe another expert will try helping you out.

    Have a nice day


    Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://busbar.blogspot.com or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer
    Friday, June 25, 2010 1:40 PM
  • Hi,

     

    Since we have detail error information, I think we need to analyze it first.

     

     /NOFORCE
    Do not shut down Internet services on failure to stop them gracefully.

     

    /TIMEOUT:val
    This allows you to specify the timeout value in seconds waiting for a successful stop of Internet services. On expiration of this timeout, the computer can be restarted if the /REBOOTONERROR parameter is specified. The default value is 20 seconds for restart, 60 seconds for stop.

     

    During the setup, we need to do some configruation on IIS server, also it will need restart to let the change become effective.

     

    Durting the restart, if the computer is in low performance/heavy load, some service will not restart succesfully.

     

    For this issue, I recommend you to reboot the server(since you have installed the other exchange role) and then try to install CAS again.

     

    Regards,

    Xiu  

    Monday, June 28, 2010 8:53 AM
  • Hi Xiu,

    Even if I rebooted or reinstall the CAS role, it goes with the same error. Do you think it is related to pre-requisite installation of IIS? In the IIS7 console, I saw the Globe Icon with Question mark of the " Default Web Site". The EMC and EMS are ok, I'm having a thoughts of reinstalling the IIS, but i'm bit hesitant, I might messed up with the other server roles.

    Any thoughts on this?

    Thanks /

    LRMCP

    • Proposed as answer by EX太复杂 Thursday, February 14, 2013 2:48 PM
    • Unproposed as answer by EX太复杂 Thursday, February 14, 2013 2:49 PM
    Thursday, July 1, 2010 10:17 AM
  • Hi LRMCP,

    I've seen this same problem. Long story short: The problem was resolved by removing the Non-http Activation feature in .Net Framework.

    You might want to give it a try.

    Make sure you have this one installed too:
    http://support.microsoft.com/default.aspx?scid=kb%3bEN-US%3b975443

    Non-http activation is part of the WCF and it is not used by any role of Exchange 2010

    Thanks,


    sabues
    • Marked as answer by LRMCP Saturday, July 3, 2010 2:07 PM
    Thursday, July 1, 2010 4:10 PM
  • Hi All,

    Thank you for your replies, this has been resolved by the following:

    1. Un-install the server roles in using

    2. Remove the "Non-http Activation feature in .Net Framework", once this service feature will be remove, the "Question Mark in the Globe icon of the Default Web Site".

    3. Install the "CAS Role"

    Thanks /

    LRMCP

     

    • Marked as answer by LRMCP Saturday, July 3, 2010 2:07 PM
    Saturday, July 3, 2010 2:07 PM
  • Hi All,

    In my case i resolved the issue by the following:

    1) Remove the "Non-http Activation feature in .Net Framework"

    2) Execute again Service Pack 2 Exchange server setup.


    Pablo Di Maria Optima Ingeniería S.A

    • Proposed as answer by EX太复杂 Thursday, February 14, 2013 2:49 PM
    Saturday, May 19, 2012 5:20 PM