locked
I unable to in stall Security Update for Windows Vista (KB2536275) and more detail below which error code 80070005 please help! RRS feed

  • Question

  • Security Update for Windows Vista (KB2536275)
    Security Update for Windows Vista (KB2503665)
    Security Update for Windows Vista (KB2535512)
    Security Update for Windows Vista (KB2503665)
    Security Update for Windows Vista (KB2476490)
    Cumulative Security Update for Internet Explorer 8 for Windows Vista (KB2530548)
    Security Update for Windows Vista (KB2544893)
    Security Update for Internet Explorer 8 for Windows Vista (KB2544521)
    Security Update for Windows Vista (KB2536276)
    Thursday, June 23, 2011 9:11 PM

Answers

  • 1. Please download the subinacl.msi file from the following link and save the installation patch onto the Desktop:
     
    http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en#AffinityDownloads
     
    2. Please go to the Desktop and double click the downloaded file.
    3. Please select the C:\Windows\System32 folder as the Destination Folder during the installation. Later we will use this tool to reset the permission settings on the current machine.
     
    Note: If the UAC (User Account Control) window is prompted for permission to continue, please click Continue.
     
    4. Click Start, in the Start Search bar, type: "notepad" (without quotes) and press Enter.
    5. Copy the following commands and then paste them into the open Notepad window:
     
    @echo off
     
    subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
    subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
    subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
    subinacl /subdirectories %SystemDrive% /grant=administrators=f
     
    subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
    subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
    subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
    subinacl /subdirectories %SystemDrive% /grant=system=f
     
    @Echo =========================
    @Echo Finished.
    @Echo =========================
    @pause
     
    6. After pasting the above commands, please close the Notepad window. Choose Save when you are prompted to save the file. Type "reset.bat" as the file name and choose Desktop from the left panel as the save location.
    7. Refer to the Desktop and right click the reset.bat file, and then choose "Run as administrator."
    8. You will see a DOS-like window processing.
     
    Note: It may take several minutes. Please be patient. When it is completed, you will be prompted with the message: "Finished, press any key to continue".
     
    Try to install the updates again.
    Monday, July 4, 2011 7:46 AM

All replies

  • Please try downloading it and installing it manually.

    If this does not help, please:

    • Run sfc /scannow and chkdsk /r /f
    • Download and Install System Update readiness tool for Windows Vista
    • Reset Windows Update components
    • Disable all security softwares.

    After that, try again.

    If the problem persists, try performing an in-place upgrade of your OS.

     


    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

    Microsoft Student Partner 2010 / 2011
    Microsoft Certified Professional
    Microsoft Certified Systems Administrator: Security
    Microsoft Certified Systems Engineer: Security
    Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
    Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
    Microsoft Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
    Microsoft Certified Technology Specialist: Windows 7, Configuring
    Microsoft Certified IT Professional: Enterprise Administrator

    Thursday, June 23, 2011 9:32 PM
  • Hi,

    Do you receive the error code on every security updates mentioned above?

    If so, It is suggested to prepare clean boot and try again as your security software or other third party software may cause conflict:

    To place the computer in a clean boot state, follow the steps below:

    1.     Click Start, type msconfig in the Start Search box, and then press ENTER. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

    2.     On the General tab, click Selective Startup.

    3.     Under Selective Startup, click to clear the Load Startup Items check box.

    4.     Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.

    5.     Click OK.

    6.     When you are prompted, click Restart.

    7.     After the computer starts, start the installation and check whether the problem is resolved.

    Please check if you are able to install the update, also let us know as to what error message or error code you get during windows updates. Please disable the antivirus software as well.


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    Tuesday, June 28, 2011 10:20 AM
    Moderator
  • I can manually install some of it but not all of them and update complete no error on the one that i  manually install. Still some error on the one i cannot manually install.

    Thank you your advice it help me solve the problem half of it.


    AR
    Tuesday, June 28, 2011 12:16 PM
  • Hi,

    Could you please specify which update failed with the error 80070005?

    If it is for Internet explorer, please reset IE to check the result.

    If it is security for Windows Vista, please disable your security software manually and try again.

    In some cases, we can't pingpoint the root cause, we can hide the update and wait for next service pack.

    Regards,

     


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    Wednesday, June 29, 2011 8:04 AM
    Moderator
  • Hi,  Windows update below have problem that i try to install by manual still have error. Also my computer use Firefox browser not IE. 

    Security Update for Windows Vista (KB2535512)Installation status: Failed. Error details: Code 80070005

    Cumulative Security Update for Internet Explorer 8 for Windows Vista (KB2530548) Installation status: Failed.Error details: Code 80070005

    Security Update for Internet Explorer 8 for Windows Vista (KB2544521) Installation status: Failed. Error details: Code 80070005

    Security Update for Windows Vista (KB2536276) Installation status: Failed. Error details: Code 80070005

    Security Update for Windows Vista (KB2536276) Installation status: Failed. Error details: Code 80070005

    Thank you.
    AR
    Wednesday, June 29, 2011 8:20 PM
  • 1. Please download the subinacl.msi file from the following link and save the installation patch onto the Desktop:
     
    http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en#AffinityDownloads
     
    2. Please go to the Desktop and double click the downloaded file.
    3. Please select the C:\Windows\System32 folder as the Destination Folder during the installation. Later we will use this tool to reset the permission settings on the current machine.
     
    Note: If the UAC (User Account Control) window is prompted for permission to continue, please click Continue.
     
    4. Click Start, in the Start Search bar, type: "notepad" (without quotes) and press Enter.
    5. Copy the following commands and then paste them into the open Notepad window:
     
    @echo off
     
    subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
    subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
    subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
    subinacl /subdirectories %SystemDrive% /grant=administrators=f
     
    subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
    subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
    subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
    subinacl /subdirectories %SystemDrive% /grant=system=f
     
    @Echo =========================
    @Echo Finished.
    @Echo =========================
    @pause
     
    6. After pasting the above commands, please close the Notepad window. Choose Save when you are prompted to save the file. Type "reset.bat" as the file name and choose Desktop from the left panel as the save location.
    7. Refer to the Desktop and right click the reset.bat file, and then choose "Run as administrator."
    8. You will see a DOS-like window processing.
     
    Note: It may take several minutes. Please be patient. When it is completed, you will be prompted with the message: "Finished, press any key to continue".
     
    Try to install the updates again.
    Monday, July 4, 2011 7:46 AM
  • Any suggestions of what to do if Magon's solution above still doesn't work? I've still got a laptop which is trying (and failing) to install this update every time I turn it on. And, of course, then restarting when I foget that its trying to do that!.

     

    Saturday, July 9, 2011 9:04 AM
  • Hi Oldlozzer, is it sorted?

    Any suggestions of what to do if Magon's solution above still doesn't work? I've still got a laptop which is trying (and failing) to install this update every time I turn it on. And, of course, then restarting when I foget that its trying to do that!.

     

    I'd think turn off Auto-downloading and installing of updates temporarily. so you can Reboot without your laptop trying to update itself immediately. (I like to see what it is first so I have auto-install off always here.)

    I don't know what the update does, though it succeeded here no drama, so I can only suggest to turn OFF any other Comms type programs while you're downloading/installing. (eg IE/messenger/LAN to other computers etc. and also antivirus/firewall type things.) And try again..

    If you can't install it - Can you hide it and ignore it?  It says it's Important though (heh aren't they ALL !! )

    All the best, pkn2011

     

    • Edited by pkn2011 Friday, July 15, 2011 4:56 AM amended
    Friday, July 15, 2011 4:54 AM
  • Hi Lekthai, you wrote:

    I can manually install some of it but not all of them and update complete no error on the one that i manually install. Still some error on the one i cannot manually install.

     

    Don't forget if you right click on any of the updates listed in 'view update history' within Windows Update you can get Details on it & link to the associated bulletins on the technet site detailing even more about them there.

    Regards, pkn2011

     

    Friday, July 15, 2011 5:22 AM