locked
Exchange Best Practice Analyzer error report on Client machine , please help RRS feed

  • Question

  • i run the exBPA on the client and i got these error below  or see this screen shot

     

     

    Active Directory Forest  

     

      Unknown schema extension version : Active Directory Forest 

     The Exchange schema extensions are from an unknown version. Schema version detected is 14622. 

      Tell me more about this issue and how to resolve it.  

     

    Domain: GLOBAL  

     

      Unrecognized Exchange signature Domain: GLOBAL 

     Active Directory domain 'GLOBAL' has an unrecognized Exchange signature. Current DomainPrep version: 12639. 

      Tell me more about this issue and how to resolve it.  

     

    Organization: Global  

     

      Global incoming message size not set Organization: Global 

     The maximum incoming message size is not set. This can cause reliability problems. 

      Tell me more about this issue and how to resolve it.  

     

      Global outgoing message size not set Organization: Global 

     The maximum outgoing message size is not set. This can cause reliability problems. 

      Tell me more about this issue and how to resolve it.  

     

    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)  

     

    Server: EXCHANGE2K10MB1  

     

      VMware detected Server: EXCHANGE2K10MB1 

     Exchange server EXCHANGE2K10MB1.global.com appears to be running as a virtual machine. Please review the support policy detailed in Microsoft Knowledge Base article 897615. 

      Tell me more about this issue and how to resolve it.  

     

      WMI service start-up account Server: EXCHANGE2K10MB1 

     The Windows Management Instrumentation (WMI) service on server EXCHANGE2K10MB1.global.com is not configured to start-up as the computer account (LocalSystem). This configuration is not supported on Exchange servers. Current start-up account is localSystem. 

      Tell me more about this issue and how to resolve it.  

     

    Server: SERVER2K8PRIME  

     

      VMware detected Server: SERVER2K8PRIME 

     Exchange server SERVER2K8PRIME.global.com appears to be running as a virtual machine. Please review the support policy detailed in Microsoft Knowledge Base article 897615. 

      Tell me more about this issue and how to resolve it.  

     

      WMI service start-up account Server: SERVER2K8PRIME 

     The Windows Management Instrumentation (WMI) service on server SERVER2K8PRIME.global.com is not configured to start-up as the computer account (LocalSystem). This configuration is not supported on Exchange servers. Current start-up account is localSystem. 

      Tell me more about this issue and how to resolve it.  

    Thursday, May 12, 2011 6:04 AM

Answers

  • Maybe you can try Hyper-V. Windows 2008 R2 function.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by Siyamand Friday, May 27, 2011 4:30 AM
    Thursday, May 19, 2011 9:04 AM

All replies

  • Hi

    Click on each link and resolve it.

    Sukh

    Thursday, May 12, 2011 9:14 AM
  • i did click on each items but there were not any resolve !!

    it just tell you what is the problem and tell you how to resolve it, but in a hard way which i can not understand it !

    any other easy way ?

    REgards 

    Thursday, May 12, 2011 11:03 AM
  • Hi Syamand,

     

    just curios about how your server was deployed? have you tried dcdiag from your child? please post the result of the dcdiag? lets check what would gonna be the output?

     

    -onin.


    MCITP:SA, MCITP:EMA, MCITP:EA, MCTS, CCENT, CCNA, LPIC-1, LPIC-2 | website: http://ninuruy.wordpress.com
    Friday, May 13, 2011 1:35 AM
  • Hi
       According to your server name , you install exchange 2010 on windows 2008.
       If my understanding is wrong, please correct me.
     
       The Exchange schema extensions are from an unknown version. Schema version detected is 14622.
        value 14622 is exchange 2007 sp2 schema version. Do you run the exchange 2010 AD prepare?

        Active Directory domain 'GLOBAL' has an unrecognized Exchange signature. Current DomainPrep version: 12639.
       “it is a known issue now and will be fixed in SP1 for Exchange 2010.”

       The maximum incoming message size is not set. This can cause reliability problems.
       The maximum outgoing message size is not set. This can cause reliability problems.
        You can read this article and modify them by EMS or EMC
        http://technet.microsoft.com/en-us/library/bb676532.aspx


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Friday, May 13, 2011 2:43 AM
  • thanks for all answers , i will explain what i have and what i deployed :

     

    1- i have Vmware workstation for making virtual machines.

    2- i have 3 server with windows server 2008 R2 and one client with Windows 7 ultimate .

    3- i have exchange 2010 also 

     

    what i did :

    1- install Server 2008 R2 on Server no.1 and made it as Domain Controller and DNS server .

    and on this server i did these prerequisites .

    • from run : ServerManagerCmd -:Rsat-ADDS
    • from run : Setup/PS
    • from run : Setup/pad
    • from run : setup/pd

    2- on the second server i put Widows Server 2008R2 (this will be my HT and CAS role ) ,

    • i joined to the domain (Global.com)and logged in as global\administrator
    • i installed Microsoft Filter Pack
    • from power shell i run this code : import -model ServerManager 
    • i run this also 
      This example is for a server that will host the Client Access and Hub Transport server roles.
       Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
    • then i went to services and made the NetTcpPortsharing auto.
    • and then i install exchange 2010 with custom installation and i choose only HT and cAS .

    3-i put Windows Server 2008R2 on the third server (Mail Box server )

    • i joined it to the domain (global.com) and logged in as global\administrator
    • from power shell i run this code : import -model ServerManager 
    • This example is for a server that will host the Hub Transport or the Mailbox server role.
       Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server -Restart
    • i install exchagne 2010 with custom installtion , i chose only Mailbox .

    what i did wrong ??

     

    REgards

    Sya

     

    Sunday, May 15, 2011 6:00 AM
  • First of all I hope this is a test/dev env because I don't believe Vmware workstation is supported in prod and wouldn't use it.

    http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0

    Secondly Terance have give some advice above which will resolve your issues.

    Sukh

    • Proposed as answer by Terence Yu Monday, May 16, 2011 1:41 AM
    Sunday, May 15, 2011 2:04 PM
  • Hi syamand:
        If you run exbpa on virtual machine, sometimes the result will be odd.
        You step to install exchange 2010 is correct.
        Can you send email or receive it by exchange system?
        I agree with sukh828 suggestion. You can check whether virtual support all the function.


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Proposed as answer by Terence Yu Monday, May 16, 2011 1:41 AM
    • Unproposed as answer by Terence Yu Monday, May 16, 2011 1:41 AM
    Monday, May 16, 2011 1:41 AM
  • from the client machine , when i logged in with global\administrator  user name , and then tried to configure the outlook 2007 with auto configuration.. it could able to find the user name and email address but , after that it show message can not login to the server ....

     

    what you recommend to use instead of Vmware work station ?

     

    REgards

    Monday, May 16, 2011 7:11 AM
  • from the client machine , when i logged in with global\administrator  user name , and then tried to configure the outlook 2007 with auto configuration.. it could able to find the user name and email address but , after that it show message can not login to the server ....

     

    what you recommend to use instead of Vmware work station ?

     

    REgards

    does your server requires some certificates? or were you able to work with the self-signed certificate installed on your Server?
    MICROSOFT CERTIFIED | [MCITP:SA] [MCITP:EMA] [MCITP:EA] [MCTS] [MCP] ............ CISCO CERTIFIED | [CCENT] [CCNA] ...................................................................... LINUX CERTIFIED | [LPIC-1] [LPIC-2] ......................................................................... Blog Website | http://ninuruy.wordpress.com .............................................................

    Thursday, May 19, 2011 2:04 AM
  • i think all the problem is coming from  Vmware work station , does any one can tell me another software i can use it instead of Vmware workstation ?

     

    REgards for every body 

    Thursday, May 19, 2011 8:57 AM
  • Maybe you can try Hyper-V. Windows 2008 R2 function.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by Siyamand Friday, May 27, 2011 4:30 AM
    Thursday, May 19, 2011 9:04 AM
  • ok i will try it ... thank you very much 
    Thursday, May 19, 2011 10:01 AM
  • i tried with Hyper-V , now everything seem to be normal

    thanks for everybody 

    REgards

    Friday, May 27, 2011 4:30 AM
  • well I did say Vmware workstation is not supported
    Sukh
    Friday, May 27, 2011 8:22 AM