none
Event 219, Kernel-PnP RRS feed

  • Question

  • Hi

    I'm getting:

    The driver \Driver\WudfRd failed to load for the device USB\VID_05AC&PID_1297


    What is this and how can I fix it?


    Tuesday, March 1, 2016 11:35 AM

Answers

  • Hi,

    You can also search the GUID in Registry key, or Device manager\device properties\Class GUID to find the match one.

    To find what device the VID and DID steads for, check them on this website:

    http://pcidatabase.com/


    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

    Thursday, March 3, 2016 10:01 AM
    Owner

All replies

  • Hello

    I just suspect the issue is related to a USB device, please unplug all of this kind of device which is un-necessary and see if the issue persists.

    Please go to Device Manager and check if any device has issues. If so, please try to reinstall or update the driver to fix the error.

    This issue is caused by A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction. This event happens randomly at times due to latency issues associated at system boot up. 

    Make sure you are not using USB hub or extension cable on USB port. Please try connecting your storage device to other computer see if the issue persists.

    This issue should be resolved by changing the start type of Windows Driver Foundation - User-mode Driver Framework service to automatic. Automatic (Trigger Start) is normal because this service is triggered by plug and play device which means it cannot be running all the time.



    Regards, Regin Ravi

    Tuesday, March 1, 2016 11:46 AM
  • Hi and thanks for the reply.

    Windows Driver Foundation - User-mode Driver Framework is already set to automatic.

    Device manager doesn't show any issues with any USB drivers.


    Tuesday, March 1, 2016 12:00 PM
  • Look in the registry beneath the key

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_1297

    to find for which device the warning is for.

    According to the device id, this might be for a Apple iPhone which was connected via USB and is currently not connected,

    thus the warning can simply be ignored


    • Edited by EckiS Tuesday, March 1, 2016 3:54 PM
    • Proposed as answer by EckiS Thursday, March 3, 2016 3:56 PM
    Tuesday, March 1, 2016 3:54 PM
  • Thank you very much for the help. It makes sense, however it's not the only one.

    What about: 

    The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{175c14b9-6f46-11e5-9c0a-806e6f6e6963}#0000000000100000.

    Wednesday, March 2, 2016 10:05 AM
  • Hi,

    Detailed information for the VID and PID:

    Apple Inc.
    1 Infinite Loop

    Cupertino, CA 95014
    408-996-1010

    Vendor Id: 0x05ac
    Short Name: Apple
    Contact: 
    Web Site: http://www.apple.com
    Notes: 

    0x1297
    Chip Number: Apple iPhone
    Chip Description: Apple iPhone 4
    [ submit device info ]


    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

    Thursday, March 3, 2016 9:44 AM
    Owner
  • Hi,

    You can also search the GUID in Registry key, or Device manager\device properties\Class GUID to find the match one.

    To find what device the VID and DID steads for, check them on this website:

    http://pcidatabase.com/


    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

    Thursday, March 3, 2016 10:01 AM
    Owner