none
DirectAccess Server 2012 and 2 network card solution RRS feed

  • Question

  • I'm trying to setup DA in a two nic solution but am having an issue with routing I have a DA server with the following

    10.2.3..x/24 - external

    10.2.4.x/24 - internal

    when I trace route to a DC 172.20.41.x it goes internally via 10.2.4 all good

    when I trace route to the NLS Server 172.20.40.x it goes via 10.2.3 and validation fails

    so I can't complete the setup wizard.

    Am I supposed to set default routes on the server when deploying with 2 nics?

    Thanks

    Thursday, October 10, 2013 10:28 AM

All replies

  • Default gateway goes to External NIC

    Then static route is defined for those networks to which you want to access.

    Static route using powershell:

    • New-NetRoute –InterfaceAlias "Internal-Nic-alias" –DestinationPrefix 192.168.1.0/24 -Nexthop 10.2.4.1

    or

    Static route using cmd

    • route -p add 192.168.1.0 mask 255.255.255.0 10.2.4.1

    • Proposed as answer by Erik MoreauMVP Thursday, October 10, 2013 1:47 PM
    Thursday, October 10, 2013 1:45 PM