locked
My Laptop BSOD...Iam Using Windows 7 Ultimate...Please Help... RRS feed

Answers

  • DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.

    807e7d8c 995f12c0 nt!KiTrap0E+0x2cf
    WARNING: Stack unwind information not available. Following frames may be wrong.
    807e7e0c 83093933 gHidPnp +0x22c0
    807e7e54 9688b30d nt!IopfCompleteRequest+0x128
    807e7e84 9688bf55 USBPORT!USBPORT_Core_iCompleteDoneTransfer+0x6e0
    807e7eb0 9688c6f6 USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x33b
    807e7ed8 968889ce USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xbc
    807e7efc 8b2a2894 USBPORT!USBPORT_Xdpc_Worker+0x173
    807e7f48 830931b5 sptd+0x11894
    807e7fa4 83093018 nt!KiExecuteAllDpcs+0xf9
    807e7ff4 830927dc nt!KiRetireDpcList+0xd5
    807e7ff8 b2fd4ce4 nt!KiDispatchInterrupt+0x2c
          
        Loaded symbol image file: gHidPnp.Sys
        Image path: \SystemRoot\System32\Drivers\gHidPnp.Sys
        Image name: gHidPnp.Sys
        Timestamp:        Fri Jul 14 01:30:51 2006

    this very old driver is the cause. Is you remove the driver and still get crashes, change the Command Rate from 1 to 2.


    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    • Proposed as answer by Andre.Ziegler Tuesday, March 1, 2011 1:45 PM
    • Marked as answer by endlez Thursday, March 3, 2011 1:49 PM
    Monday, February 28, 2011 1:21 PM
  • I don't know, search the file, make a rightclick on it and look for details about the manufacture. Now go to the homepage and download the latest driver.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    • Marked as answer by endlez Thursday, March 3, 2011 1:41 PM
    Tuesday, March 1, 2011 1:45 PM
  • Hi,

     

    gHidPnp.sys is most likely a USB Device Enhanced Function driver and is the one causing the issue.  It probably controls some USB device such as mouse.  If you installed a USB device recently, uninstall it and install it again with an updated driver from the vendor site.

     

    Best Regards,

    Niki


    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by endlez Thursday, March 3, 2011 1:41 PM
    Thursday, March 3, 2011 9:35 AM

All replies

  • Hi,

    The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug check has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

    If you have made alterations to your memory configuration i would run a memory test if i was you on the new ram could be faulty.


    MyPcHealth ------ Some Free Tools
    Monday, February 28, 2011 12:38 PM
  • DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.

    807e7d8c 995f12c0 nt!KiTrap0E+0x2cf
    WARNING: Stack unwind information not available. Following frames may be wrong.
    807e7e0c 83093933 gHidPnp +0x22c0
    807e7e54 9688b30d nt!IopfCompleteRequest+0x128
    807e7e84 9688bf55 USBPORT!USBPORT_Core_iCompleteDoneTransfer+0x6e0
    807e7eb0 9688c6f6 USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x33b
    807e7ed8 968889ce USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xbc
    807e7efc 8b2a2894 USBPORT!USBPORT_Xdpc_Worker+0x173
    807e7f48 830931b5 sptd+0x11894
    807e7fa4 83093018 nt!KiExecuteAllDpcs+0xf9
    807e7ff4 830927dc nt!KiRetireDpcList+0xd5
    807e7ff8 b2fd4ce4 nt!KiDispatchInterrupt+0x2c
          
        Loaded symbol image file: gHidPnp.Sys
        Image path: \SystemRoot\System32\Drivers\gHidPnp.Sys
        Image name: gHidPnp.Sys
        Timestamp:        Fri Jul 14 01:30:51 2006

    this very old driver is the cause. Is you remove the driver and still get crashes, change the Command Rate from 1 to 2.


    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    • Proposed as answer by Andre.Ziegler Tuesday, March 1, 2011 1:45 PM
    • Marked as answer by endlez Thursday, March 3, 2011 1:49 PM
    Monday, February 28, 2011 1:21 PM

  • DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.

    807e7d8c 995f12c0 nt!KiTrap0E+0x2cf
    WARNING: Stack unwind information not available. Following frames may be wrong.
    807e7e0c 83093933 gHidPnp +0x22c0
    807e7e54 9688b30d nt!IopfCompleteRequest+0x128
    807e7e84 9688bf55 USBPORT!USBPORT_Core_iCompleteDoneTransfer+0x6e0
    807e7eb0 9688c6f6 USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x33b
    807e7ed8 968889ce USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xbc
    807e7efc 8b2a2894 USBPORT!USBPORT_Xdpc_Worker+0x173
    807e7f48 830931b5 sptd+0x11894
    807e7fa4 83093018 nt!KiExecuteAllDpcs+0xf9
    807e7ff4 830927dc nt!KiRetireDpcList+0xd5
    807e7ff8 b2fd4ce4 nt!KiDispatchInterrupt+0x2c
          
        Loaded symbol image file: gHidPnp.Sys
        Image path: \SystemRoot\System32\Drivers\gHidPnp.Sys
        Image name: gHidPnp.Sys
        Timestamp:        Fri Jul 14 01:30:51 2006

    this very old driver is the cause. Is you remove the driver and still get crashes, change the Command Rate from 1 to 2.


    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    gHidPnp.Sys is driver for what???
    Tuesday, March 1, 2011 12:56 AM
  • I don't know, search the file, make a rightclick on it and look for details about the manufacture. Now go to the homepage and download the latest driver.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    • Marked as answer by endlez Thursday, March 3, 2011 1:41 PM
    Tuesday, March 1, 2011 1:45 PM
  • Hi,

     

    gHidPnp.sys is most likely a USB Device Enhanced Function driver and is the one causing the issue.  It probably controls some USB device such as mouse.  If you installed a USB device recently, uninstall it and install it again with an updated driver from the vendor site.

     

    Best Regards,

    Niki


    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by endlez Thursday, March 3, 2011 1:41 PM
    Thursday, March 3, 2011 9:35 AM
  • thanks for all the reply... i running memory test using memtest86 and my memory is fine... so iam update all my driver and fix my registry using registybooster... and the result my laptop has been four days running and not having BSOD... i hope my laptop is fixed and not having BSOD agin...
    Thursday, March 3, 2011 1:52 PM