When I tried to setup the new RC1
I got the Error code: 0x80070241 ,that is after copying the files needed for the setup , Is there any usefull information about that subject .
And I have tried to install the Rc1 x64 it didn't work and this my pc conf.
| Code Name |
Prescott |
| Specification |
Intel(R) Pentium(R) 4 CPU 3.00GHz |
| Family / Model / Stepping |
F 3 3 |
|
| CPU#2 |
APIC ID = 1 |
| CPU Name |
Intel Pentium 4 (logical unit) |
|
| Motherboard manufacturer |
http://www.abit.com.tw/ |
| Motherboard model |
IS7-E2 (Intel i865-ICH5), 1.0 |
| BIOS vendor |
Phoenix Technologies, LTD |
| BIOS revision |
6.00 PG |
| BIOS release date |
06/01/2004 |
| Chipset |
Intel i865P/PE/G/i848P rev. A2 |
| Southbridge |
Intel 82801EB (ICH5) rev. 2 |
| Sensor chip |
Winbond W83627HF |
| FSB Select |
800 MHz |
| Performance Mode |
disabled |
| Graphic Interface |
AGP |
| AGP Status |
enabled, rev. 3.0 |
| AGP Data Transfert Rate |
8x |
| AGP Max Rate |
8x |
| AGP Side Band Addressing |
supported, enabled |
| AGP Aperture Size |
128 MBytes | |
|
|
| Memory |
|
| DRAM Type |
DDR-SDRAM |
| DRAM Size |
512 MBytes |
| DRAM Frequency |
204.8 MHz |
| FSB:DRAM |
1:1 |
| CAS# Latency |
2.5 clocks |
| RAS# to CAS# |
4 clocks |
| RAS# Precharge |
4 clocks |
| Cycle Time (TRAS) |
8 clocks |
| # of memory modules |
1 |
| Module 0 |
Kingmax Semiconductor DDR-SDRAM PC3200 - 512
MBytes
| |
| Software |
|
| Windows version |
Microsoft Windows XP Workstation Service Pack 2 (Build 2600) |
| DirectX version |
9.0c |
