none
SCCM 1806 PXE without WDS RRS feed

  • Question

  • I'm having trouble enabling this awesome feature, can't figure out:

    • Where are the boot files are now stored? there is no RemoteInstall folder.
    • What DHCP options should I use? and how do I configure them if there is no boot folder?

    My current setup is a single SCCM server with DP/PXE enabled, WDS is removed, DHCP on different VLANs configured as follow:

    • Option 66: SCCM server IP
    • Option 67: SMSBoot\x64\wdsnbp.com

    Testing boot on a VM gives the error:

    • PXE-T00: Failed to open file.
    • PXE-E36: Error received from TFTP server.

    The SMSPXE.log file showing the entries:

    • TFTP: ClientIP: connected.
    • TFTP: ClientIP: not able to open SMSBoot\x86\wdsnbp.com.

    Help?


    Noorish


    • Edited by Noor K Thursday, November 8, 2018 6:27 PM
    Thursday, November 8, 2018 4:00 PM

All replies

  • You don't need to know where the Boot Files are stored because you don't should not configure any DHCP Options for PXE Boot.

    Configure IP Helpers on your Routers for your PXE enabled DPs like you have done (already) for your DHCP Servers.

    If you have enabled PXE Boot and DP on a Windows 10 Client you can PXE Boot all Clients in the same subnet without any additional configuration. 



    • Edited by Michael-CM Friday, November 9, 2018 9:15 AM
    Thursday, November 8, 2018 7:03 PM
  • Hi,

    Here is a link for the detailed steps to enable SCCM PXE without WDS. Please kindly check and hope it helps for you.
    https://www.systemcenterdudes.com/sccm-pxe-without-wds/


    Best Regards
    Tina Cao

    Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Friday, November 9, 2018 8:39 AM