none
Unable to install the DPM 2012 R2 RRS feed

  • Question

  • [10/1/2018 1:18:07 PM] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [10/1/2018 1:18:07 PM] Data : Mode of setup = User interface
    [10/1/2018 1:18:07 PM] Data : OSVersion = Microsoft Windows NT 6.2.9200.0
    [10/1/2018 1:18:07 PM] Information : Check if the media is removable
    [10/1/2018 1:18:07 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [10/1/2018 1:18:07 PM] Data : Drive Name = C:\
    [10/1/2018 1:18:07 PM] Data : Drive Type = 3
    [10/1/2018 1:18:07 PM] Information : Check attributes of the directory
    [10/1/2018 1:18:07 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [10/1/2018 1:18:07 PM] Data : File Attributes = Directory
    [10/1/2018 1:18:07 PM] Information : Check if the media is removable
    [10/1/2018 1:18:07 PM] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [10/1/2018 1:18:07 PM] Data : Drive Name = C:\
    [10/1/2018 1:18:07 PM] Data : Drive Type = 3
    [10/1/2018 1:18:07 PM] Information : Check attributes of the directory
    [10/1/2018 1:18:07 PM] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [10/1/2018 1:18:07 PM] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [10/1/2018 1:18:07 PM] Information : Check if the media is removable
    [10/1/2018 1:18:07 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [10/1/2018 1:18:07 PM] Data : Drive Name = C:\
    [10/1/2018 1:18:07 PM] Data : Drive Type = 3
    [10/1/2018 1:18:07 PM] Information : Check attributes of the directory
    [10/1/2018 1:18:07 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [10/1/2018 1:18:07 PM] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [10/1/2018 1:18:07 PM] Information : The setup wizard is initialized.
    [10/1/2018 1:18:07 PM] Information : Starting the setup wizard.
    [10/1/2018 1:18:07 PM] Information : <<< Dialog >>> Welcome Page : Entering
    [10/1/2018 1:18:09 PM] Information : <<< Dialog >>> Welcome Page : Leaving
    [10/1/2018 1:18:09 PM] Information : <<< Dialog >>> Inspect Page : Entering
    [10/1/2018 1:18:25 PM] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [10/1/2018 1:18:25 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER2014\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSSQLSERVER2014'
    [10/1/2018 1:18:25 PM] * Exception :  => System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions, String rosettaNamespace)
    [10/1/2018 1:18:25 PM] * Exception :  => DPM Setup is unable to connect to the specified instance of SQL Server Reporting Service.Verify that the specified computer and the instance of SQL Server Reporting Service meets the following requirements:
    1)The computer is accessible over the network.
    2)A firewall is not blocking requests from the DPM computer. For steps to configure the firewall on the SQL Server, follow the steps described here: http://go.microsoft.com/fwlink/?LinkId=94001.
    3)The specified user belongs to the Administrator group on the computer running the SQL Server instance and the sysadmin role on the SQL Server instance.
    4)The SQL Browser service is running on the SQL server.
    5)TCP/IP protocol is enabled for the specified instance of the SQL server.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportServerNotInstalledException: Report server is not installed ---> System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions, String rosettaNamespace)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions, String rosettaNamespace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InspectPage.ValidateReportingInputs(String machineName, String instanceName)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InspectPage.ValidateReportingInputs(String machineName, String instanceName)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InspectPage.InspectThreadEntry()
    *** Mojito error was: RemoteReportingConnectionFailed; 0; None
    [10/1/2018 1:19:35 PM] Information : The setup was cancelled by user.
    [10/1/2018 1:19:35 PM] Information : Microsoft System Center 2012 R2 Data Protection Manager setup over.
    Monday, October 1, 2018 7:56 AM

All replies

  • Hi,

    Have you made sure you have all the prerequisites? Also what SQL Server version are you using?

    DPM 2012 R2 Installation prerequisites

    Best regards,
    Leon


    Blog: https://thesystemcenterblog.com LinkedIn:

    Monday, October 1, 2018 6:57 PM
  • For DPM 2012 R2 i am using SQL server 2014 version. we are not sure about the prerequisite kindly let how to identify them. Thanks in advance

    Regards,

    Surya

    Thursday, October 4, 2018 5:41 AM
  • Please note that SQL Server 2014 is only supported as a database server for installations of Data Protection Manager (DPM) with Update Rollup 6 applied.
    A new installation of DPM 2012 R2 cannot work with SQL Server 2014.

    To use SQL Server 2014 with DPM 2012 R2, you must install DPM 2012 R2 with SQL Server 2012, and then upgrade to SQL Server 2014.

    If you have an older version than Update Rollup 6, then I would suggest you update it and preferrably to the latest Update Rollup 14.


    Download:
    Update Rollup 14 for System Center 2012 R2 Data Protection Manager


    Blog: https://thesystemcenterblog.com LinkedIn:

    Thursday, October 4, 2018 5:46 AM
  • HI 

    Whether SQL 2012 version will support for DPM 2012 R2 

    Regards

    Surya

    Thursday, October 4, 2018 7:54 AM
  • DPM 2012 R2 supports the following SQL Server 2012:

    • SQL Server 2012 Enterprise, Standard (64-bit)
    • SQL Server 2012 SP1 Enterprise, Standard (64-bit)
    • SQL Server 2012 SP2 Enterprise, Standard (64 bit)
    • SQL Server 2012 SP3 Enterprise, Standard (64 bit)



    Blog: https://thesystemcenterblog.com LinkedIn:

    Thursday, October 4, 2018 7:59 AM
  • HI Leon

    Thanks for the reply.

    I"m currently providing the SQL 2012 instance on DPM 2012 R2. But i got some warning and error.

    [10/4/2018 1:25:26 PM] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [10/4/2018 1:25:26 PM] Data : Mode of setup = User interface
    [10/4/2018 1:25:26 PM] Data : OSVersion = Microsoft Windows NT 6.2.9200.0
    [10/4/2018 1:25:26 PM] Information : Check if the media is removable
    [10/4/2018 1:25:26 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [10/4/2018 1:25:26 PM] Data : Drive Name = C:\
    [10/4/2018 1:25:26 PM] Data : Drive Type = 3
    [10/4/2018 1:25:26 PM] Information : Check attributes of the directory
    [10/4/2018 1:25:26 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [10/4/2018 1:25:26 PM] Data : File Attributes = Directory
    [10/4/2018 1:25:26 PM] Information : Check if the media is removable
    [10/4/2018 1:25:26 PM] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [10/4/2018 1:25:26 PM] Data : Drive Name = C:\
    [10/4/2018 1:25:26 PM] Data : Drive Type = 3
    [10/4/2018 1:25:26 PM] Information : Check attributes of the directory
    [10/4/2018 1:25:26 PM] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [10/4/2018 1:25:26 PM] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [10/4/2018 1:25:26 PM] Information : Check if the media is removable
    [10/4/2018 1:25:26 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [10/4/2018 1:25:26 PM] Data : Drive Name = C:\
    [10/4/2018 1:25:26 PM] Data : Drive Type = 3
    [10/4/2018 1:25:26 PM] Information : Check attributes of the directory
    [10/4/2018 1:25:26 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [10/4/2018 1:25:26 PM] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [10/4/2018 1:25:26 PM] Information : The setup wizard is initialized.
    [10/4/2018 1:25:26 PM] Information : Starting the setup wizard.
    [10/4/2018 1:25:27 PM] Information : <<< Dialog >>> Welcome Page : Entering
    [10/4/2018 1:25:29 PM] Information : The setup was cancelled by user.
    [10/4/2018 1:25:29 PM] Information : Microsoft System Center 2012 R2 Data Protection Manager setup over.
    [10/4/2018 1:25:42 PM] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [10/4/2018 1:25:42 PM] Data : Mode of setup = User interface
    [10/4/2018 1:25:42 PM] Data : OSVersion = Microsoft Windows NT 6.2.9200.0
    [10/4/2018 1:25:42 PM] Information : Check if the media is removable
    [10/4/2018 1:25:42 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [10/4/2018 1:25:42 PM] Data : Drive Name = C:\
    [10/4/2018 1:25:42 PM] Data : Drive Type = 3
    [10/4/2018 1:25:42 PM] Information : Check attributes of the directory
    [10/4/2018 1:25:42 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [10/4/2018 1:25:42 PM] Data : File Attributes = Directory
    [10/4/2018 1:25:42 PM] Information : Check if the media is removable
    [10/4/2018 1:25:42 PM] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [10/4/2018 1:25:42 PM] Data : Drive Name = C:\
    [10/4/2018 1:25:42 PM] Data : Drive Type = 3
    [10/4/2018 1:25:42 PM] Information : Check attributes of the directory
    [10/4/2018 1:25:42 PM] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [10/4/2018 1:25:42 PM] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [10/4/2018 1:25:42 PM] Information : Check if the media is removable
    [10/4/2018 1:25:42 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [10/4/2018 1:25:42 PM] Data : Drive Name = C:\
    [10/4/2018 1:25:42 PM] Data : Drive Type = 3
    [10/4/2018 1:25:42 PM] Information : Check attributes of the directory
    [10/4/2018 1:25:42 PM] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [10/4/2018 1:25:42 PM] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [10/4/2018 1:25:42 PM] Information : The setup wizard is initialized.
    [10/4/2018 1:25:42 PM] Information : Starting the setup wizard.
    [10/4/2018 1:25:42 PM] Information : <<< Dialog >>> Welcome Page : Entering
    [10/4/2018 1:25:51 PM] Information : <<< Dialog >>> Welcome Page : Leaving
    [10/4/2018 1:25:51 PM] Information : <<< Dialog >>> Inspect Page : Entering
    [10/4/2018 1:26:24 PM] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [10/4/2018 1:26:24 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSSQLSERVER2012'
    [10/4/2018 1:27:05 PM] Data : Path of configuration file for SQL Server 2008 Reporting Services = E:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER2012\Reporting Services\ReportServer\RSReportServer.config
    [10/4/2018 1:27:05 PM] Information : OS >= win 8 , enable Dedupe role
    [10/4/2018 1:27:06 PM] Information : output : True
    .. 
     error : 
    [10/4/2018 1:27:06 PM] Data : Path of inspection output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:27:06 PM] Information : Instantiating inspect component.
    [10/4/2018 1:27:06 PM] Data : Path of output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:27:06 PM] Information : Deserializing the check XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\checks.xml
    [10/4/2018 1:27:06 PM] Information : Loading the check XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\checks.xml
    [10/4/2018 1:27:06 PM] Information : Deserialising the scenario XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\scenarios.xml
    [10/4/2018 1:27:06 PM] Information : Loading the check XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\scenarios.xml
    [10/4/2018 1:27:06 PM] Information : Getting scenarios for the product: DPM
    [10/4/2018 1:27:06 PM] Information : Getting scenarios for DPM
    [10/4/2018 1:27:06 PM] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
    [10/4/2018 1:27:06 PM] Information : Query WMI provider for SQL Server 2008.
    [10/4/2018 1:27:06 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSSQLSERVER2012' and PropertyName='Version'
    [10/4/2018 1:27:06 PM] * Exception :  => System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
    [10/4/2018 1:27:06 PM] * Exception : Expecting the following exception. Ignoring intentionally.  => System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.DetectSqlServer(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
    [10/4/2018 1:27:06 PM] Information : SQL Server 2008 R2 SP2 instance MSSQLSERVER2012 is not present on this system.
    [10/4/2018 1:27:06 PM] Information : Query WMI provider for SQL Server 2008.
    [10/4/2018 1:27:06 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSSQLSERVER2012' and PropertyName='Version'
    [10/4/2018 1:27:07 PM] Information : SQL Server 2008 R2 SP2 instance MSSQLSERVER2012 is present on this system.
    [10/4/2018 1:27:07 PM] Information : Inspect context initialized with 
    SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [10/4/2018 1:27:07 PM] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [10/4/2018 1:27:07 PM] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [10/4/2018 1:27:07 PM] Information : **************************************************************************************
    [10/4/2018 1:27:07 PM] Information : Start Inspect.
    [10/4/2018 1:27:07 PM] Information : Getting checks for the group : Common
    [10/4/2018 1:27:07 PM] Information : Getting checks for the group : Install
    [10/4/2018 1:27:07 PM] Information : Getting checks for the group : Retail
    [10/4/2018 1:27:07 PM] Information : Getting checks for the group : Remote
    [10/4/2018 1:27:07 PM] Information : Check if the machine role is Domain Controller.
    [10/4/2018 1:27:07 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: SELECT * FROM Win32_ComputerSystem
    [10/4/2018 1:27:07 PM] Data : Localhost in Computer role = 3
    [10/4/2018 1:27:07 PM] Information : The machine role is not a Domain Controller.
    [10/4/2018 1:27:07 PM] Data : checkId = Processor
    [10/4/2018 1:27:07 PM] Information : Running the check: Processor
    [10/4/2018 1:27:07 PM] Information : Getting the check for the checkId : Processor
    [10/4/2018 1:27:07 PM] Information : Calling the method: CheckProcessor
    [10/4/2018 1:27:07 PM] Information : Check processor configuration.
    [10/4/2018 1:27:07 PM] Information : Query WMI provider for configuration of processor.
    [10/4/2018 1:27:07 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: SELECT * FROM Win32_Processor
    [10/4/2018 1:27:11 PM] Data : Clock speed of processor = 2295
    [10/4/2018 1:27:11 PM] Data : Manufacturer of processor = GenuineIntel
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: Processor and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = Memory
    [10/4/2018 1:27:11 PM] Information : Running the check: Memory
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : Memory
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckPhysicalMemory
    [10/4/2018 1:27:11 PM] Information : Check the amount of RAM.
    [10/4/2018 1:27:11 PM] Information : Query WMI provider for configuration of memory.
    [10/4/2018 1:27:11 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: SELECT * FROM Win32_OperatingSystem
    [10/4/2018 1:27:11 PM] Data : Found memory = 33553972
    [10/4/2018 1:27:11 PM] Data : Total amount of memory = 33553972
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: Memory and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = MMCVersion
    [10/4/2018 1:27:11 PM] Information : Running the check: MMCVersion
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : MMCVersion
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckMMCVersion
    [10/4/2018 1:27:11 PM] Information : Check the version of Microsoft Management Console on the machine.
    [10/4/2018 1:27:11 PM] Data : Version of Microsoft Management Console on the machine = 6.3.9600.18910
    [10/4/2018 1:27:11 PM] Data : Required version of Microsoft Management Console = 5.2.3790.2560
    [10/4/2018 1:27:11 PM] Information : MMC correct version is detected.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: MMCVersion and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = KB962975
    [10/4/2018 1:27:11 PM] Information : Running the check: KB962975
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : KB962975
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckWindowsHotfix
    [10/4/2018 1:27:11 PM] Information : Check if KB962975 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB962975 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Check if KB962975 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB962975 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: KB962975 and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = KB975759
    [10/4/2018 1:27:11 PM] Information : Running the check: KB975759
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : KB975759
    [10/4/2018 1:27:11 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759.
    [10/4/2018 1:27:11 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759 is absent.
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckWindowsHotfix
    [10/4/2018 1:27:11 PM] Information : Check if KB975759 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB975759 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Check if KB975759 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB975759 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: KB975759 and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = KB2279787
    [10/4/2018 1:27:11 PM] Information : Running the check: KB2279787
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : KB2279787
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckWindowsHotfix
    [10/4/2018 1:27:11 PM] Information : Check if KB2279787 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB2279787 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Check if KB2279787 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB2279787 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: KB2279787 and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = KB2223201
    [10/4/2018 1:27:11 PM] Information : Running the check: KB2223201
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : KB2223201
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckWindowsHotfix
    [10/4/2018 1:27:11 PM] Information : Check if KB2223201 QFE is applied.
    [10/4/2018 1:27:11 PM] Information : KB2223201 QFE is applied on this system.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: KB2223201 and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = MonadSoftware
    [10/4/2018 1:27:11 PM] Information : Running the check: MonadSoftware
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : MonadSoftware
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckMonadSoftware
    [10/4/2018 1:27:11 PM] Information : Detect if PowerShell is installed.
    [10/4/2018 1:27:11 PM] Data : Installed Version of Windows PowerShell. = 6.3.9600.17415
    [10/4/2018 1:27:11 PM] Data : Minimum Required version of Windows PowerShell. = 6.0.6002.18111
    [10/4/2018 1:27:11 PM] Information : Required version of PowerShell software is installed on this system.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: MonadSoftware and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = DotNetRequiresReboot
    [10/4/2018 1:27:11 PM] Information : Running the check: DotNetRequiresReboot
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : DotNetRequiresReboot
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckDotNetRequiresReboot
    [10/4/2018 1:27:11 PM] Information : Check if reboot is required because of Dot Net installation.
    [10/4/2018 1:27:11 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
    [10/4/2018 1:27:11 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
    [10/4/2018 1:27:11 PM] Information : Reboot is not required.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: DotNetRequiresReboot and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = SISFilter
    [10/4/2018 1:27:11 PM] Information : Running the check: SISFilter
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : SISFilter
    [10/4/2018 1:27:11 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter.
    [10/4/2018 1:27:11 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter is absent.
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckSISFilter
    [10/4/2018 1:27:11 PM] Information : Detect if SIS Service is running.
    [10/4/2018 1:27:11 PM] Information : Detect if SIS Filter service SIS is running.
    [10/4/2018 1:27:11 PM] Information : SIS Service SIS is running on this system.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: SISFilter and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = MSIVersion
    [10/4/2018 1:27:11 PM] Information : Running the check: MSIVersion
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : MSIVersion
    [10/4/2018 1:27:11 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion.
    [10/4/2018 1:27:11 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion is absent.
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckMSIVersion
    [10/4/2018 1:27:11 PM] Information : Check the version of Windows Installer on the machine.
    [10/4/2018 1:27:11 PM] Data : Version of Windows Installer on the machine = 5.0.9600.19082
    [10/4/2018 1:27:11 PM] Data : Required version of Windows Installer = 4.5.6001.18000
    [10/4/2018 1:27:11 PM] Information : Windows Installer correct version is detected.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: MSIVersion and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = RebootRequired
    [10/4/2018 1:27:11 PM] Information : Running the check: RebootRequired
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : RebootRequired
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckRebootRequired
    [10/4/2018 1:27:11 PM] Information : Check if reboot is required.
    [10/4/2018 1:27:11 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
    [10/4/2018 1:27:11 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
    [10/4/2018 1:27:11 PM] Information : Reboot is not required.
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: RebootRequired and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = SQLServerTools
    [10/4/2018 1:27:11 PM] Information : Running the check: SQLServerTools
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : SQLServerTools
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckSqlServerTools
    [10/4/2018 1:27:11 PM] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [10/4/2018 1:27:11 PM] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [10/4/2018 1:27:11 PM] Information : Adding the check result entry for checkId: SqlServerTools and result: 0
    [10/4/2018 1:27:11 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:11 PM] Data : Result = 0
    [10/4/2018 1:27:11 PM] Data : checkId = SQLServer
    [10/4/2018 1:27:11 PM] Information : Running the check: SQLServer
    [10/4/2018 1:27:11 PM] Information : Getting the check for the checkId : SQLServer
    [10/4/2018 1:27:11 PM] Information : Calling the method: CheckSqlServer
    [10/4/2018 1:27:11 PM] Information : Check if SQL Server 2008 R2 SP2 is installed.
    [10/4/2018 1:27:11 PM] Information : Query WMI provider for SQL Server 2008.
    [10/4/2018 1:27:11 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSSQLSERVER2012' and PropertyName='Version'
    [10/4/2018 1:27:12 PM] Information : SQL Server 2008 R2 SP2 instance MSSQLSERVER2012 is present on this system.
    [10/4/2018 1:27:12 PM] Information : Adding the check result entry for checkId: SqlServer and result: 0
    [10/4/2018 1:27:12 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:12 PM] Data : Result = 0
    [10/4/2018 1:27:12 PM] Data : checkId = ReportingServer
    [10/4/2018 1:27:12 PM] Information : Running the check: ReportingServer
    [10/4/2018 1:27:12 PM] Information : Getting the check for the checkId : ReportingServer
    [10/4/2018 1:27:12 PM] Information : Calling the method: CheckReportingServer
    [10/4/2018 1:27:12 PM] Information : Check if Reporting Server 2008 R2 SP2 is installed.
    [10/4/2018 1:27:12 PM] Information : Query WMI provider for Reporting Server 2008 R2 SP2.
    [10/4/2018 1:27:12 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER2012\v11 for query: SELECT * FROM MSReportServer_Instance WHERE InstanceName='MSSQLSERVER2012'
    [10/4/2018 1:27:12 PM] * Exception : Failed to perform the check => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ResultNotFoundException: Could not find version of Reporting Server Instance = MSSQLSERVER2012
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetReportingServerVersion(String instanceName, String reportingServerMachineName, ConnectionOptions wmiConnectionOptions, String rosettaNamespace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.DetectReportingServer(String instanceName, String reportServerMachineName, ConnectionOptions wmiConnectionOptions, String rossettaNamespace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectPrerequisites.CheckReportingServer(InspectContext context)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.Inspect.RunCheck(String checkId)
    [10/4/2018 1:27:12 PM] Information : Adding the check result entry for checkId: ReportingServer and result: 1
    [10/4/2018 1:27:12 PM] Information : Got Error Message: Failed to perform the check.See the log file for details and try again.
    [10/4/2018 1:27:12 PM] Data : Result = 1
    [10/4/2018 1:27:12 PM] Data : checkId = SQLAgentService
    [10/4/2018 1:27:12 PM] Information : Running the check: SQLAgentService
    [10/4/2018 1:27:12 PM] Information : Getting the check for the checkId : SQLAgentService
    [10/4/2018 1:27:12 PM] Information : Calling the method: CheckSqlAgentServiceConfig
    [10/4/2018 1:27:12 PM] Information : Check SQL Server Agent service configuration.
    [10/4/2018 1:27:12 PM] Data : SQL Server instance name = MSSQLSERVER2012
    [10/4/2018 1:27:12 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLAgent$MSSQLSERVER2012'
    [10/4/2018 1:27:15 PM] Data : Credentials of the service = LocalSystem
    [10/4/2018 1:27:15 PM] Information : SQL Server Agent service configuration is correct.
    [10/4/2018 1:27:15 PM] Information : Adding the check result entry for checkId: SqlAgentService and result: 0
    [10/4/2018 1:27:15 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:15 PM] Data : Result = 0
    [10/4/2018 1:27:15 PM] Data : checkId = SQLServerService
    [10/4/2018 1:27:15 PM] Information : Running the check: SQLServerService
    [10/4/2018 1:27:15 PM] Information : Getting the check for the checkId : SQLServerService
    [10/4/2018 1:27:15 PM] Information : Calling the method: CheckSqlServerServiceConfig
    [10/4/2018 1:27:15 PM] Information : Check SQL Server service configuration.
    [10/4/2018 1:27:15 PM] Data : SQL Server instance name = MSSQLSERVER2012
    [10/4/2018 1:27:15 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='MSSQL$MSSQLSERVER2012'
    [10/4/2018 1:27:16 PM] Data : Credentials of the service = LocalSystem
    [10/4/2018 1:27:16 PM] Information : SQL Server service configuration is correct.
    [10/4/2018 1:27:16 PM] Information : Adding the check result entry for checkId: SqlServerService and result: 0
    [10/4/2018 1:27:16 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:16 PM] Data : Result = 0
    [10/4/2018 1:27:16 PM] Data : checkId = SqlServerReportingServices
    [10/4/2018 1:27:16 PM] Information : Running the check: SqlServerReportingServices
    [10/4/2018 1:27:16 PM] Information : Getting the check for the checkId : SqlServerReportingServices
    [10/4/2018 1:27:16 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices.
    [10/4/2018 1:27:16 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices is absent.
    [10/4/2018 1:27:16 PM] Information : Calling the method: CheckSqlServerReportingServices
    [10/4/2018 1:27:16 PM] Information : Check if SQL Server 2008 Reporting Services is installed.
    [10/4/2018 1:27:16 PM] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [10/4/2018 1:27:16 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSSQLSERVER2012'
    [10/4/2018 1:27:56 PM] Data : Path of configuration file for SQL Server 2008 Reporting Services = E:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER2012\Reporting Services\ReportServer\RSReportServer.config
    [10/4/2018 1:27:56 PM] Information : Adding the check result entry for checkId: SqlServerReportingServices and result: 0
    [10/4/2018 1:27:56 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:56 PM] Data : Result = 0
    [10/4/2018 1:27:56 PM] Data : checkId = SqlReportServerService
    [10/4/2018 1:27:56 PM] Information : Running the check: SqlReportServerService
    [10/4/2018 1:27:56 PM] Information : Getting the check for the checkId : SqlReportServerService
    [10/4/2018 1:27:56 PM] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService.
    [10/4/2018 1:27:56 PM] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService is absent.
    [10/4/2018 1:27:56 PM] Information : Calling the method: CheckRosettaServicesConfig
    [10/4/2018 1:27:56 PM] Information : Check SQL Server 2008 Reporting Services report server service configuration.
    [10/4/2018 1:27:56 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='ReportServer$MSSQLSERVER2012'
    [10/4/2018 1:27:56 PM] Data : Credentials of the service = LocalSystem
    [10/4/2018 1:27:56 PM] Information : Report Server service configuration is correct.
    [10/4/2018 1:27:56 PM] Information : Adding the check result entry for checkId: SqlReportServerService and result: 0
    [10/4/2018 1:27:56 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:56 PM] Data : Result = 0
    [10/4/2018 1:27:56 PM] Data : checkId = ActiveDirectory
    [10/4/2018 1:27:56 PM] Information : Running the check: ActiveDirectory
    [10/4/2018 1:27:56 PM] Information : Getting the check for the checkId : ActiveDirectory
    [10/4/2018 1:27:56 PM] Information : Calling the method: DetectActiveDirectory
    [10/4/2018 1:27:56 PM] Information : Adding the check result entry for checkId: ActiveDirectory and result: 0
    [10/4/2018 1:27:56 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:56 PM] Data : Result = 0
    [10/4/2018 1:27:56 PM] Data : checkId = SQLEval
    [10/4/2018 1:27:56 PM] Information : Running the check: SQLEval
    [10/4/2018 1:27:56 PM] Information : Getting the check for the checkId : SQLEval
    [10/4/2018 1:27:56 PM] Information : Calling the method: DetectSqlEval
    [10/4/2018 1:27:56 PM] Information : Detect if SQL Server is evaluation edition
    [10/4/2018 1:27:56 PM] Information : Starting service
    [10/4/2018 1:27:56 PM] Data : Service name = MSSQL$MSSQLSERVER2012
    [10/4/2018 1:27:56 PM] Data : Current status of service = Running
    [10/4/2018 1:27:56 PM] Information : Service is already running
    [10/4/2018 1:27:56 PM] Data : Edition = Enterprise Edition (64-bit)
    [10/4/2018 1:27:56 PM] Information : Adding the check result entry for checkId: SqlEval and result: 0
    [10/4/2018 1:27:56 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:56 PM] Data : Result = 0
    [10/4/2018 1:27:56 PM] Data : checkId = ClientTCPEnabled
    [10/4/2018 1:27:56 PM] Information : Running the check: ClientTCPEnabled
    [10/4/2018 1:27:56 PM] Information : Getting the check for the checkId : ClientTCPEnabled
    [10/4/2018 1:27:56 PM] Information : Calling the method: CheckIfClientTCPEnabled
    [10/4/2018 1:27:56 PM] Information : Check if SQL Server has DPM Server already installed on it.
    [10/4/2018 1:27:56 PM] * Exception : Expecting the following exception. Ignoring intentionally.  => System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementObject.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectPrerequisites.GetSqlToolsWMINameSpace()
    [10/4/2018 1:27:56 PM] Information : Adding the check result entry for checkId: ClientTCPEnabled and result: 0
    [10/4/2018 1:27:56 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:56 PM] Data : Result = 0
    [10/4/2018 1:27:56 PM] Data : checkId = RemoteDbDPMInstalled
    [10/4/2018 1:27:56 PM] Information : Running the check: RemoteDbDPMInstalled
    [10/4/2018 1:27:56 PM] Information : Getting the check for the checkId : RemoteDbDPMInstalled
    [10/4/2018 1:27:56 PM] Information : Calling the method: CheckRemoteDbDPMInstalled
    [10/4/2018 1:27:56 PM] Information : Check if SQL Server has DPM Server already installed on it.
    [10/4/2018 1:27:56 PM] Information : The SQL and DPM machine are same so not checking for DPM installed
    [10/4/2018 1:27:56 PM] Information : Adding the check result entry for checkId: RemoteDbDPMInstalled and result: 0
    [10/4/2018 1:27:56 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:27:56 PM] Data : Result = 0
    [10/4/2018 1:27:56 PM] Data : checkId = ReportingSecureConnectionLevel
    [10/4/2018 1:27:56 PM] Information : Running the check: ReportingSecureConnectionLevel
    [10/4/2018 1:27:56 PM] Information : Getting the check for the checkId : ReportingSecureConnectionLevel
    [10/4/2018 1:27:56 PM] Information : Calling the method: CheckReportingSecureConnectionLevel
    [10/4/2018 1:27:56 PM] Information : Check Reporting SecureConnectionLevel.
    [10/4/2018 1:27:56 PM] Information : Getting the reporting secure connection level for localhost/MSSQLSERVER2012
    [10/4/2018 1:27:56 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSSQLSERVER2012'
    [10/4/2018 1:28:36 PM] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: E:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER2012\Reporting Services\ReportServer\RSReportServer.config
    [10/4/2018 1:28:36 PM] Information : Setup detected that the Reporting SecureConnectionLevel is 2.
    [10/4/2018 1:28:36 PM] Information : Adding the check result entry for checkId: ReportingSecureConnectionLevel and result: 142606336
    [10/4/2018 1:28:36 PM] Information : Getting the error code for check : ReportingSecureConnectionLevel and result : 142606336
    [10/4/2018 1:28:36 PM] Information : Found Error Code:ReportingSecureConnectionLevelNonZero and Severity: Warning
    [10/4/2018 1:28:36 PM] Information : Got Error Message: SQL Server Reporting Service on the selected instance is using Secure Socket Layer (SSL). This will be reconfigured so that Reporting Services will not use Secure Socket Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, click on the link below.
    [10/4/2018 1:28:36 PM] Data : Result = 142606336
    [10/4/2018 1:28:36 PM] Data : checkId = RemoteDbDiskSpace
    [10/4/2018 1:28:36 PM] Information : Running the check: RemoteDbDiskSpace
    [10/4/2018 1:28:36 PM] Information : Getting the check for the checkId : RemoteDbDiskSpace
    [10/4/2018 1:28:36 PM] Information : Calling the method: CheckRemoteDbDiskSpace
    [10/4/2018 1:28:36 PM] Information : Check the disk space for remote database.
    [10/4/2018 1:28:36 PM] Information : Querying WMI Namespace: \\localhost\root\cimv2 for query: select FreeSpace from Win32_LogicalDisk where DeviceID='E:'
    [10/4/2018 1:28:36 PM] Information : Remote DB disk space required : 900 MB disk space available = 12319 MB
    [10/4/2018 1:28:36 PM] Information : Adding the check result entry for checkId: RemoteDbDiskSpace and result: 0
    [10/4/2018 1:28:36 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:28:36 PM] Data : Result = 0
    [10/4/2018 1:28:36 PM] Data : checkId = RemoteDbTCP
    [10/4/2018 1:28:36 PM] Information : Running the check: RemoteDbTCP
    [10/4/2018 1:28:36 PM] Information : Getting the check for the checkId : RemoteDbTCP
    [10/4/2018 1:28:36 PM] Information : Calling the method: CheckRemoteDbTCP
    [10/4/2018 1:28:36 PM] Information : Check the Named Pipes protocol for remote database.
    [10/4/2018 1:28:36 PM] Information : Adding the check result entry for checkId: RemoteDbTCP and result: 0
    [10/4/2018 1:28:36 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:28:36 PM] Data : Result = 0
    [10/4/2018 1:28:36 PM] Data : checkId = RemoteDbMsi
    [10/4/2018 1:28:36 PM] Information : Running the check: RemoteDbMsi
    [10/4/2018 1:28:36 PM] Information : Getting the check for the checkId : RemoteDbMsi
    [10/4/2018 1:28:36 PM] Information : Calling the method: CheckRemoteDbMsi
    [10/4/2018 1:28:36 PM] Information : Check whether the remote DB msi has been installed.
    [10/4/2018 1:28:36 PM] Information : Adding the check result entry for checkId: RemoteDbMsi and result: 0
    [10/4/2018 1:28:36 PM] Information : Got Error Message: Check Succeeded
    [10/4/2018 1:28:36 PM] Data : Result = 0
    [10/4/2018 1:28:36 PM] Information : Getting the string form of report object
    [10/4/2018 1:28:36 PM] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:28:36 PM] Information : End Inspect.
    [10/4/2018 1:28:36 PM] Information : **************************************************************************************
    [10/4/2018 1:28:36 PM] Information : Instantiating inspect component.
    [10/4/2018 1:28:36 PM] Data : Path of output xml = \PostInstallInspect.xml
    [10/4/2018 1:28:36 PM] Information : Deserializing the check XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\checks.xml
    [10/4/2018 1:28:36 PM] Information : Loading the check XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\checks.xml
    [10/4/2018 1:28:36 PM] Information : Deserialising the scenario XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\scenarios.xml
    [10/4/2018 1:28:36 PM] Information : Loading the check XML from path : C:\Users\599865\AppData\Local\Temp\DPM62D1.tmp\DPM2012\Setup\scenarios.xml
    [10/4/2018 1:28:36 PM] Information : Getting scenarios for the product: DPM
    [10/4/2018 1:28:36 PM] Information : Getting scenarios for DPM
    [10/4/2018 1:28:36 PM] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
    [10/4/2018 1:28:36 PM] Information : Query WMI provider for SQL Server 2008.
    [10/4/2018 1:28:36 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSSQLSERVER2012' and PropertyName='Version'
    [10/4/2018 1:28:36 PM] * Exception :  => System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
    [10/4/2018 1:28:36 PM] * Exception : Expecting the following exception. Ignoring intentionally.  => System.Management.ManagementException: Invalid namespace 
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObjectSearcher.Initialize()
       at System.Management.ManagementObjectSearcher.Get()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.DetectSqlServer(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
    [10/4/2018 1:28:36 PM] Information : SQL Server 2008 R2 SP2 instance MSSQLSERVER2012 is not present on this system.
    [10/4/2018 1:28:36 PM] Information : Query WMI provider for SQL Server 2008.
    [10/4/2018 1:28:36 PM] Information : Querying WMI Namespace: \\localhost\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSSQLSERVER2012' and PropertyName='Version'
    [10/4/2018 1:28:37 PM] Information : SQL Server 2008 R2 SP2 instance MSSQLSERVER2012 is present on this system.
    [10/4/2018 1:28:37 PM] Information : Inspect context initialized with 
    SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [10/4/2018 1:28:37 PM] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [10/4/2018 1:28:37 PM] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [10/4/2018 1:28:37 PM] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:28:37 PM] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:28:37 PM] Information : Getting the checkResult for the checkId : SqlServer
    [10/4/2018 1:28:37 PM] Information : Getting the checkResult for the checkId : SqlServerReportingServices
    [10/4/2018 1:28:37 PM] Information : Getting the checkResult for the checkId : SqlServerTools
    [10/4/2018 1:28:37 PM] Information : Getting the installables which were not detected
    [10/4/2018 1:28:37 PM] Information : Getting the string form of report object
    [10/4/2018 1:28:37 PM] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [10/4/2018 1:28:37 PM] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:28:37 PM] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [10/4/2018 1:28:37 PM] Information : Getting the falures while performing checks
    [10/4/2018 1:28:37 PM] Information : Getting the error results
    [10/4/2018 1:28:37 PM] Information : Getting the warning results
    [10/4/2018 1:28:37 PM] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [10/4/2018 1:28:37 PM] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [10/4/2018 1:28:37 PM] Information : Getting the falures while performing checks
    [10/4/2018 1:28:37 PM] Information : Getting the error results
    [10/4/2018 1:28:37 PM] Information : Getting the warning results

    Thursday, October 4, 2018 8:13 AM
  • First of all make sure you have all the prerequisites below:

    DPM 2012 R2 prerequisites

    The server on which you want to install DPM needs the following prerequisites installed:

    • DPM 2012 R2 requires at least .NET Framework 4.0. DPM 2012 and DPM 2012 with SP1 require at least 3.5 with SP1.
    • Windows Installer 4.5 or later versions

    • Microsoft Visual C++ 2008 Redistributable

    • Windows PowerShell. DPM 2012 R2 requires PowerShell 3.0. DPM 2012 and 2012 with sP1 requires PowerShell 2.0.

    • Microsoft Application Error Reporting

    • Windows Single Instance Store (SIS)


    Next make sure you have installed a supported SQL Server 2012 version:

    Supported SQL Server for DPM 2012 R2

    • SQL Server 2008 R2 SP1, SP2, and SP3 Standard, Datacenter
    • SQL Server 2012 Enterprise, Standard (64-bit)
    • SQL Server 2012 SP1, SP2, and SP3 Enterprise, Standard (64-bit)
    • SQL Server 2014 Enterprise, Standard (64-bit)
    • SQL Server 2014 SP1 Enterprise, Standard (64-bit)

    Is your SQL server installed locally on the DPM server or remotely? When are you receiving this error message?


    Blog: https://thesystemcenterblog.com LinkedIn:

    Thursday, October 4, 2018 8:23 AM
  • hi 

    I have installed the SQL server 2012 on windows 2012 r2 server. im trying to install the DPM 2012r2 on the same server.

    please help me how to install or identify the below prerequisite on windows 2012R2 server

    • Microsoft Application Error Reporting
    • Windows Single Instance Store (SIS)
    Thursday, October 4, 2018 9:44 AM
  • Microsoft Application Error Reporting - Can be installed from DPM setup. **<root directory>DPM2012\setup\redist and run dw20sharedamd64.msi.as an Administrator.

    Windows Single Instance Store (SIS) - There’s no redistributable to install SIS. Instead, install as follows:

    1. From an elevated command prompt on the DPM server, run the following to install the SIS limited feature (including the SIS filter driver):

      In Windows Server 2012 or 2012 R2 type:
    dism /online /enable-feature:SIS-Limited

    The service name is case sensitive so be sure to type SIS-Limited otherwise installation will fail. You’ll need to restart the server after installed.

    For installing the DPM SQL database please refer to this official guide:

    Set up the SQL Server database for DPM


    Blog: https://thesystemcenterblog.com LinkedIn:

    Thursday, October 4, 2018 9:50 AM
  • hi 

    we have tried everything that was shared with the manual, but still we receive errors. 

    kindly help on this.

    Thursday, October 4, 2018 12:17 PM
  • Could you provide screenshots of these errors when trying to install DPM?

    Also make sure the account you are using for installing DPM with has sa permissions on the SQL database.


    Blog: https://thesystemcenterblog.com LinkedIn:

    Thursday, October 4, 2018 12:27 PM