locked
intel teredo tunneling adapter ERROR:10 RRS feed

  • Question

  • i have microsoft teredo tunneling adapter error 10 and i can not fix it . i tried with methods on youtube,didn't helped at all.
    Thursday, May 21, 2015 6:27 PM

Answers

  • This is a known problem if Zone alarm is installed.  If you have it installed remove it at least to check

    To turn off Teredo tunneling interface 6to4 open an elevated command prompt and type

    netsh interface terredo set state disabled.


    To Re-install it
    1. Click on Start.
    2. Type Device Manager in search box and open it.
    3. Click the Action tab at the top and click add legacy hardware
      then click next and next again it will then scan and find nothing click next on the screen after that.
      Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it.
      To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.
    If there is no "add legacy hardware" option, you need to plug in the device that uses tunneling.

    Wanikiya and Dyami--Team Zigzag

    Thursday, May 21, 2015 7:31 PM

All replies

  • This is a known problem if Zone alarm is installed.  If you have it installed remove it at least to check

    To turn off Teredo tunneling interface 6to4 open an elevated command prompt and type

    netsh interface terredo set state disabled.


    To Re-install it
    1. Click on Start.
    2. Type Device Manager in search box and open it.
    3. Click the Action tab at the top and click add legacy hardware
      then click next and next again it will then scan and find nothing click next on the screen after that.
      Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it.
      To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.
    If there is no "add legacy hardware" option, you need to plug in the device that uses tunneling.

    Wanikiya and Dyami--Team Zigzag

    Thursday, May 21, 2015 7:31 PM
  • well worth a try .thanks, i will reply you if it not helps ;) 


    • Edited by tomasyus Friday, May 22, 2015 9:43 AM
    Friday, May 22, 2015 9:42 AM
  • method is not working it is still ERROR:10 there,do you have another method that helps ? or i need to turn off adapter.

    tell me what is microsoft teredo tunneling adapter what is he doing there

    • Edited by tomasyus Friday, May 22, 2015 11:44 AM
    Friday, May 22, 2015 11:41 AM
  • TO

    You only use tunneling for printers.  If you do not have a printer that needs it you can probably turn it off.


    Wanikiya and Dyami--Team Zigzag

    Friday, May 22, 2015 12:00 PM
  • aha. i will turn it off.

    thank you for helping me and i'm glad you helped me. thank you!

    Friday, May 22, 2015 6:46 PM