locked
open relay to specific IP address RRS feed

  • Question

  • error 421 4.3.2 Service not available, closing transmiss

     

    configure new ip address for relay

    192.168.10.250

    on local server test no firewall issue.

     

     

     


    john
    • Edited by johntseung Friday, August 5, 2011 4:11 PM firewall
    Friday, August 5, 2011 4:10 PM

Answers

  • Hi Johntseung,

     

    As I understand, you want to create an receive connector to allow the backup application relay to Exchange server.

    The Exchange server with the IP address of 192.168.10.250/32

    And the backup application with the IP address of 192.168.10.1/32

    If I misunderstand you, please let me know.

    Please don’t change the local IP address to receive email.

    See below links.

    Allowing application servers to relay off Exchange Server 2007

    How to setup a Receive Connector

    • Marked as answer by johntseung Sunday, August 14, 2011 9:46 AM
    Tuesday, August 9, 2011 5:24 AM
  • Hi John,

    As per my expierence abour email relay, you shoud be avoide to put range of IP address which come under same range of Exchange server IP's. you should mentioned only very restrictive range for IP which needed.

    Try to use only oen IP address in allow list and then test it.

    If you want ro relay mail to internet recepients also then you must have to create one new receive connector and allow "anonymous access" on it. Follow below URL to do it.

    How To Allow Relaying in Exchange 2010 and Exchange 2007:

    http://exchangepedia.com/2007/01/exchange-server-2007-how-to-allow-relaying.html

     


    Anil MCC 2011,ITIL V3,MCSA 2003,MCTS 2010, My Blog : http://messagingschool.wordpress.com
    • Marked as answer by johntseung Sunday, August 14, 2011 9:46 AM
    Wednesday, August 10, 2011 3:51 PM

All replies

  • anything wrong?
    Thanks.

    john
    • Marked as answer by johntseung Sunday, August 14, 2011 9:46 AM
    • Unmarked as answer by johntseung Sunday, August 14, 2011 9:46 AM
    Friday, August 5, 2011 4:11 PM
  • Hi Johntseung,

     

    As I understand, you want to create an receive connector to allow the backup application relay to Exchange server.

    The Exchange server with the IP address of 192.168.10.250/32

    And the backup application with the IP address of 192.168.10.1/32

    If I misunderstand you, please let me know.

    Please don’t change the local IP address to receive email.

    See below links.

    Allowing application servers to relay off Exchange Server 2007

    How to setup a Receive Connector

    • Marked as answer by johntseung Sunday, August 14, 2011 9:46 AM
    Tuesday, August 9, 2011 5:24 AM
  •  

    I change the name to allowrelay and run the shell, not work.


    [PS] C:\Windows\system32>Get-ReceiveConnector "AllowRelay" | Add-ADPermission -

    ser "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "ms-Exch-SMTP-Accept-Any-Rec

    pient"

    Get-ReceiveConnector : The operation could not be performed because object 'All

    owRelay' could not be found on domain controller 'XXXg.local'.

    At line:1 char:21

    + Get-ReceiveConnector <<<<  "AllowRelay" | Add-ADPermission -User "NT AUTHORIT

    Y\ANONYMOUS LOGON" -ExtendedRights "ms-Exch-SMTP-Accept-Any-Recipient"

        + CategoryInfo          : InvalidData: (:) [Get-ReceiveConnector], Managem

       entObjectNotFoundException

        + FullyQualifiedErrorId : FC0E971D,Microsoft.Exchange.Management.SystemCon

       figurationTasks.GetReceiveConnector

     


     

    Hi Johntseung,

     

    As I understand, you want to create an receive connector to allow the backup application relay to Exchange server.

    The Exchange server with the IP address of 192.168.10.250/32

    And the backup application with the IP address of 192.168.10.1/32

    If I misunderstand you, please let me know.

    Please don’t change the local IP address to receive email.

    See below links.

    Allowing application servers to relay off Exchange Server 2007 

    How to setup a Receive Connector



    john
    Wednesday, August 10, 2011 3:26 PM
  • Hi John,

    As per my expierence abour email relay, you shoud be avoide to put range of IP address which come under same range of Exchange server IP's. you should mentioned only very restrictive range for IP which needed.

    Try to use only oen IP address in allow list and then test it.

    If you want ro relay mail to internet recepients also then you must have to create one new receive connector and allow "anonymous access" on it. Follow below URL to do it.

    How To Allow Relaying in Exchange 2010 and Exchange 2007:

    http://exchangepedia.com/2007/01/exchange-server-2007-how-to-allow-relaying.html

     


    Anil MCC 2011,ITIL V3,MCSA 2003,MCTS 2010, My Blog : http://messagingschool.wordpress.com
    • Marked as answer by johntseung Sunday, August 14, 2011 9:46 AM
    Wednesday, August 10, 2011 3:51 PM