locked
SMS WSUS Configuration Manager failed to monitor WSUS Server RRS feed

  • Question

  • HI,

    From last month I am observing SCCM-WSUS problem on my sccm server. Its frequent problem now and some time the problem resolve by its own.

    I wonder how some time automatically it starts working fine.

    The problem is :

    There are many errors on "WSUS controll manager " but WSUS it is syncronizing properly.

    (msg ID : 7003) SMS WSUS Configuration Manager failed to monitor WSUS Server "SCCMSERVER20".

    Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.

    (Msg ID : 7000)SMS WSUS Configuration Manager failed to configure proxy settings on WSUS Server "SCCMSERVER20".Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.


    Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.You can receive failure because proxy is set but proxy name is not specified or proxy server port is invalid.

    WSUS controll manager Log:

    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111

    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001

    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.7600.226) q

    Failed to create instance of Microsoft.SystemsManagementServer.WSUS.WSUSServer. error = The parameter is incorrect.

    STATMSG: ID=7000 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONTROL_MANAGER" SYS=SCCMSERVER20 SITE=PPP PID=21828 TID=25812 GMTDATE=Mon Aug 08 00:26:47.012 2011 ISTR0="SCCMSERVER20" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0

    Failed to set WSUS Local Configuration. Will retry configuration in 1 minutes


    Joy, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 12:51 AM

Answers

  • Could you restart the WsusPool application pool in IIS/Application Pools ? Also, have you seen my link above ? If so and without result, so no chance with this article http://support.microsoft.com/kb/962224 ?


    Bechir Gharbi | http://myitforum.com/cs2/blogs/bgharbi/ | Time zone : GMT+1
    • Marked as answer by It'SJ Wednesday, August 10, 2011 8:09 PM
    Monday, August 8, 2011 7:58 PM

All replies

  • So, WSUS is already installed along with SUP?

    Is there any upstream server for SUP configuration?

    What is the configuration done in the Software Update Point component?


    Anoop C Nair - This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 5:25 AM
  • HI Anoop Thanks for the reply.

    Yes WSUS already installed with SUP.

    Yes there is a up streem server for wsus. This server get the updates from central site server WSUS.

    SUP Component :

    Active SUP on this server , port 80 and 443, and use intranet only client connection is enable.


    Joy, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 3:35 PM
  • The central server is working fine and there is no issue in that server, right?

    The same ports ( 80 and 443) have been used in central site as well?

    If default website (80 and 443) has been used by other applications, then using custom website (with port 8530 and 8531) will be better.
     
     More details --> 
     http://technet.microsoft.com/en-us/library/bb693886.aspx

    Also, go through the below thread in which we had same discussion

    http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/8d84a284-d531-403b-89c5-2b0dfe6ed445


    Anoop C Nair - This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 5:22 PM
  • Are you sure that proxy settings are configured for the SUP ? And what proxy settings in IE ?
    Bechir Gharbi | http://myitforum.com/cs2/blogs/bgharbi/ | Time zone : GMT+1
    Monday, August 8, 2011 5:36 PM
  • Hi Bechir Gharbi,

    Thanks for the reply, NO proxy is configured on SUP role. None of our site having proxy on SUP role. WSUS sync with Central site server WSUS and get the update. Both Central and problemitc primary site server is in the same location, No proxy setting for IE also.

     

     


    Joy, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 6:30 PM
  • Ok and what about Anoop's questions ? Also could you look at this thread http://social.technet.microsoft.com/Forums/en-US/configmgrgeneral/thread/45392874-6833-48ed-a8ee-7e9462781eba/
    Bechir Gharbi | http://myitforum.com/cs2/blogs/bgharbi/ | Time zone : GMT+1
    Monday, August 8, 2011 6:39 PM
  • Yes I use Port 80 ans 443 for SSL in Central Site Server and WSUS connectivity too,My central site is working fine, there is no issue on central site server.

     


    Joy, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 7:36 PM
  • I reinstalled the SUP now, but no luck.i still get the same error.


    Joy, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Proposed as answer by itsted Tuesday, March 15, 2016 12:21 PM
    • Unproposed as answer by itsted Tuesday, March 15, 2016 12:21 PM
    Monday, August 8, 2011 7:57 PM
  • Could you restart the WsusPool application pool in IIS/Application Pools ? Also, have you seen my link above ? If so and without result, so no chance with this article http://support.microsoft.com/kb/962224 ?


    Bechir Gharbi | http://myitforum.com/cs2/blogs/bgharbi/ | Time zone : GMT+1
    • Marked as answer by It'SJ Wednesday, August 10, 2011 8:09 PM
    Monday, August 8, 2011 7:58 PM
  • ;( I did all above suggested, Restarted WsusPool App Pool in IIS, issue not resolved then I registered those file as well but Its hurts me again... I am at the same place from where I started today morning.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Monday, August 8, 2011 9:09 PM
  • Is WSUS on a remote server ? If so, have you added the ConfigMgr computer account in the local admin group on the WSUS server  and the WSUS console is it installed on the ConfigMgr server? Otherwise if the WSUS and ConfigMgr are on the same server can you remove SUP then WSUS and reinstall WSUS then SUP.
    Bechir Gharbi | http://myitforum.com/cs2/blogs/bgharbi/ | Time zone : GMT+1
    Monday, August 8, 2011 9:21 PM
  • Wonder !!! When I applied article http://support.microsoft.com/kb/962224 it not workd out, next day I made my mind to reinstall WSUS and SUP, but befor just to reconfirm that I applied same article again, It workd. 


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Wednesday, August 10, 2011 8:13 PM
  • Wonder !!! When I applied article http://support.microsoft.com/kb/962224 it not workd out, next day I made my mind to reinstall WSUS and SUP, but befor just to reconfirm that I applied same article again, It workd. 


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by It'SJ Wednesday, August 10, 2011 8:14 PM
    • Unmarked as answer by It'SJ Wednesday, August 10, 2011 8:15 PM
    • Proposed as answer by Kamala kannan.c Thursday, November 8, 2012 12:47 PM
    Wednesday, August 10, 2011 8:13 PM