locked
Driver is not applicable SCCM RRS feed

  • Question

  • Hello,

    I have a problem with the import and integration from network drivers in a boot Images.

    I receive following error Message:
    Driver is not applicable to any supported platforms. Code 0x80070661

    The Network Driver is the following: Windows 10 64x for the Intel Ethernet Connection (2) I219-LM

    I have already installed the Hotfix KB3074857 but without result.

    When I boot from the BootStick I receive the message: No valid network adapter found

    Version Systen Center 2012 R2 Configuration Manager SP1 ST: 5.00.8239.1000 CV: 5.0.8239.1203

    Thank you,
    Pictop

    Thursday, February 4, 2016 2:54 PM

Answers

  • Now have resolved the Problem.

    I have done the following steps.

    1. Remove the Config Mgr Integration from the Microsoft Deployment Toolkit
    2. Uninstall the Windows 10 ADK (Version 10.0.x.x)
    3. Install the Windows 10 ADK (Version 10.1.10586.0)
    4. Add the ConfigMgr Integration from the Microsoft Deployment Toolkit
    5. Create a new WinPE Boot Image
    6. Change on the Driver inf File following line
    [Manufacturer] %Intel% = Intel, NTamd64.10.0, NTamd64.10.0.1
    
    in
    
    [Manufacturer] %V_Intel% = Intel, NTamd64.10.0

         8. Import the Driver
         9. Add driver to the new Boot Image

    And than has works.

    Regards,
    Pictop


    • Marked as answer by Pictop Tuesday, February 9, 2016 9:06 AM
    • Edited by Pictop Tuesday, February 9, 2016 9:06 AM
    Tuesday, February 9, 2016 9:06 AM

All replies

  • For that driver if you read the .inf 

    look at what version of OS it refer to might be a issue there.

    Also i would upgrade to SP1 CU2 if you can 

    Thursday, February 4, 2016 3:38 PM
  • What WinPE version is your boot image? If you're trying to apply Windows 10 driver to your boot image, the boot image itself should also be 10 that comes with ADK for Windows 10. If you're running R2 SP1, I'm betting you're using ADK for 8.1 and therefore use the driver for Windows 8.1 instead.

    Thursday, February 4, 2016 3:41 PM
  • Thank you for the quick answer.

    Now we have installed the CU2 Update but it not works.

    I´m use the ADK Version 10.0.26624.

    Other Windows 10 Drivers works fine.

    I have downloaded the Network Driver from this 2 Pages:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8741498&swItemId=vc_159700_1&swEnvOid=4192

    https://catalog.update.microsoft.com/v7/site/Search.aspx?q=VEN_8086%26DEV_15B7%26SUBSYS_8056103C

    Thursday, February 4, 2016 7:34 PM
  • What is the OS version your SCCM server is running on?

    I saw this once back in the days: https://support.microsoft.com/en-us/kb/3025419

    If you are running on sever 2012 r2 i would look into the .inf file just to make sure the version is good and not something weird.

    Thursday, February 4, 2016 10:36 PM
  • Dear Sir,

        I've successfully imported the driver.

        Like Narcoticoo pointed out, if your server OS is 2008 R2, you may couldn't import some new drivers to your SCCM console. 

    Best regards,

    Jimmy




    Friday, February 5, 2016 4:04 AM

  •  Like Narcoticoo pointed out, if your server OS is 2008 R2, you may couldn't import some new drivers to your SCCM console. 

    Best regards,

    Jimmy


    Uh? No, I did not say a thing about 2008 R2 or anything about servers for that matter.

    Have you tried the driver Intel provides? Have you tried adding the 8.1 driver, does it work? Have you tried injecting the 10 driver that's causing problems, to your boot image with dism, does it work?


    • Edited by Narcoticoo Friday, February 5, 2016 4:39 AM
    Friday, February 5, 2016 4:39 AM

  •  Like Narcoticoo pointed out, if your server OS is 2008 R2, you may couldn't import some new drivers to your SCCM console. 

    Best regards,

    Jimmy


    Uh? No, I did not say a thing about 2008 R2 or anything about servers for that matter.

    Have you tried the driver Intel provides? Have you tried adding the 8.1 driver, does it work? Have you tried injecting the 10 driver that's causing problems, to your boot image with dism, does it work?



    Hi,

        I'm so sorry, I've made a mistake, the link (https://support.microsoft.com/en-us/kb/3025419) said, and I've tried in my lab which is 2008 R2, the drivers(Intel I219-LM) couldn't be added .

    Regards,

    Jimmy






    Friday, February 5, 2016 9:44 AM
  • The Import from the Windows 7 Driver works but I receive the same error on the Boot mage. (No valid network adapter found).

    I think it doesn’t work on the boot image because on the Windows 7 Driver there is no Windows 10 in the supported Platforms.


    OS: Windows Server 2008 R2 SP1

    Friday, February 5, 2016 1:30 PM
  • Did you try the Windows 8.1 driver like I suggested?

    Friday, February 5, 2016 2:03 PM
  • Whit this Windows 8.1 Driver the same issue as the Windows 10 Driver. But other windows 8.1 driver works fine.

    :(

    Friday, February 5, 2016 3:36 PM
  • Well looking at the error code you got 

    0x80070661 - This installation package is not supported by this processor type. Contact your product vendor.

    Are you sure you are using the right drivers  for the right WINPE ?

    X64 for X64 and X86 for X86 ?


    Friday, February 5, 2016 3:39 PM
  • Yes I sure we use the x64 boot Image. 

    Here a part of the ini file

    *****************************************************************************
    ; e1d65x64.INF (Intel 64 bit extension Platform Only,
    ; Windows 10 64 bit extension)
    
    ;
    ; Intel(R) Gigabit Network connections
    ;******************************************************************************
    ;
    
    [Version]
    Signature   = "$Windows NT$"
    Class       = Net
    ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
    Provider    = %Intel%
    CatalogFile = e1d65x64.cat
    DriverVer   = 11/25/2015,12.13.17.7
    
    [Manufacturer]
    %Intel%     = Intel, NTamd64.10.0, NTamd64.10.0.1
    
    [ControlFlags]
    ExcludeFromSelect = \ 
        PCI\VEN_8086&DEV_153A,\ 
        PCI\VEN_8086&DEV_153B
    
    [Intel]
    
    [Intel.NTamd64.10.0.1]
    ; DisplayName                   Section              DeviceID
    ; -----------                   -------              --------
    %E153ANC.DeviceDesc%            = E153A.10.0.1,       
    ...
    %E15B7NC.DeviceDesc%            = E15B7.10.0.1,       PCI\VEN_8086&DEV_15B7
    ...


    • Edited by Pictop Friday, February 5, 2016 4:38 PM
    Friday, February 5, 2016 4:35 PM
  • Now have resolved the Problem.

    I have done the following steps.

    1. Remove the Config Mgr Integration from the Microsoft Deployment Toolkit
    2. Uninstall the Windows 10 ADK (Version 10.0.x.x)
    3. Install the Windows 10 ADK (Version 10.1.10586.0)
    4. Add the ConfigMgr Integration from the Microsoft Deployment Toolkit
    5. Create a new WinPE Boot Image
    6. Change on the Driver inf File following line
    [Manufacturer] %Intel% = Intel, NTamd64.10.0, NTamd64.10.0.1
    
    in
    
    [Manufacturer] %V_Intel% = Intel, NTamd64.10.0

         8. Import the Driver
         9. Add driver to the new Boot Image

    And than has works.

    Regards,
    Pictop


    • Marked as answer by Pictop Tuesday, February 9, 2016 9:06 AM
    • Edited by Pictop Tuesday, February 9, 2016 9:06 AM
    Tuesday, February 9, 2016 9:06 AM