locked
6to4 problem continued RRS feed

  • Question

  •  

    I would have posted on the previous one, but it appeared to be closed, or at least I couldn't find a button to add a comment. Ok my dillema. I have an HP Designjet 5500 plotter printer that runs off my computer, as well as a plotter cutter. Now, I don't know exactly what a 6to4 adapter is, but since I've had the error 31 I can't use any of them from my network. Now I'm not sure if this means there is an error with my network, because my Broadcom 440 integrated controller (for my ethernet) gives me the green light, and the network status says connected and that my network is connected, but it doesn't send information. I read on the last one something about IVp6 and I know nothing about it except when I was with tech support in command prompt I saw it along with IVp4, but I don't know how to tell if i sent it or whatever. I guess my question is, is the error on my 6to4 and 6to4 #15 adapters what could be causing my plotter error? Everything was fine until I installed Reg Cure to fix my computer being slow. After that nothing has worked right. Any help would be much appreciated. Thanks. Oh and I tried to follow the steps through the registry and it came up with nothing for blocked stuff. Ok thanks
    Thursday, December 6, 2007 10:11 PM

Answers

  • Hello,

     

    Thanks for your post!

     

    For more information about this issue, please refer to another thread in our forum:

     

    http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2526575&SiteID=17

     

    Generally, if you haven’t IPv6 network deployed, the error message with 6to4 Adapter won’t cause any problem.

     

    In this issue, please temporarily uninstall Reg Cure and check the network issue again.

     

    You can try to uninstall and reinstall 6to4 adapter after uninstalling Reg Cure:

    1.    Open Device Manager.

    2.    Right-click Microsoft 6to4 adapter and select Uninstall.

    3.    To reinstall the driver for 6to4 adapter, enter Control Panel.

    4.    In the top right corner, type Install drivers. Click to the search result Install drivers for old devices with Add Hardware wizard.

    5.    Click Next, in the next window, choose Install the hardware that I manually select from a list (Advanced).

    6.    Select Network Adapter, and click Next.

    7.    In manufacturer list, select Microsoft, then select Microsoft 6to4 Adapter in network adapter list.

     

    For more information about IPv6 and 6to4 adapter, please refer to:

     

    Introduction to IPv6

    http://technet.microsoft.com/en-us/library/bb726944.aspx

     

    Configuring and Deploying IPv6 on Windows Vista

    http://www.microsoft.com/downloads/details.aspx?familyid=CE286032-4DF0-4D53-A21E-1590E9280FEF&displaylang=en

     

    If you want to convert your post into comment, I can help you with it.

     

    Regards,

    Lionel Chen

    Microsoft Online Community Support

     

    Monday, December 10, 2007 10:01 AM

All replies

  • Hello,

     

    Thanks for your post!

     

    For more information about this issue, please refer to another thread in our forum:

     

    http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2526575&SiteID=17

     

    Generally, if you haven’t IPv6 network deployed, the error message with 6to4 Adapter won’t cause any problem.

     

    In this issue, please temporarily uninstall Reg Cure and check the network issue again.

     

    You can try to uninstall and reinstall 6to4 adapter after uninstalling Reg Cure:

    1.    Open Device Manager.

    2.    Right-click Microsoft 6to4 adapter and select Uninstall.

    3.    To reinstall the driver for 6to4 adapter, enter Control Panel.

    4.    In the top right corner, type Install drivers. Click to the search result Install drivers for old devices with Add Hardware wizard.

    5.    Click Next, in the next window, choose Install the hardware that I manually select from a list (Advanced).

    6.    Select Network Adapter, and click Next.

    7.    In manufacturer list, select Microsoft, then select Microsoft 6to4 Adapter in network adapter list.

     

    For more information about IPv6 and 6to4 adapter, please refer to:

     

    Introduction to IPv6

    http://technet.microsoft.com/en-us/library/bb726944.aspx

     

    Configuring and Deploying IPv6 on Windows Vista

    http://www.microsoft.com/downloads/details.aspx?familyid=CE286032-4DF0-4D53-A21E-1590E9280FEF&displaylang=en

     

    If you want to convert your post into comment, I can help you with it.

     

    Regards,

    Lionel Chen

    Microsoft Online Community Support

     

    Monday, December 10, 2007 10:01 AM
  • I also have a issue with the 6to4 adapter, is this some thing that has to do with vista or the new silverlight, because I didn't have this problem about two weeeks ago, And it looks like alot of other users are having the same issues?.

    Wednesday, April 16, 2008 10:51 AM