Windows 7 Ultimate 64bit BSOD, twice. RRS feed

  • Question

  • I had a problem getting my computer to start, twice. I fixed it by restarting it, didn't go in safe mode , just started it normally.The problem is i get BSOD and this is written "PAGE_FAULT_IN_NONPAGED_AREA" and in the middle the error ***STOP:0X00000050(0XFFFFF8A005C6A000, 0x0000000000000000, 0XFFFFF880041F797A, 0x0000000000000000). Mini dump uploaded -> https://skydrive.live.com/#cid=E65807ABA1D35F13&id=E65807ABA1D35F13!126 and if i may add, sometimes letters in firefox are hmm... "foggy" and they remain untill i check them, idk if it is connected :))

    Monday, March 4, 2013 7:02 PM


  • itsarijit

    Did you even look at the DMP files?  He has a 7 year old mobile phone driver in win 7.  If you had looked at the DMPS you would have seen he is not overclocking.

    Wanikiya & Dyami -Team-ZigZag.

    • Marked as answer by tracycai Wednesday, March 13, 2013 6:47 AM
    Monday, March 11, 2013 2:35 AM

All replies

  • We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
    If you are overclocking stop.  (chances are if you dont know if you are, you are not)a
    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

    The procedure:

    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on  your site, MS doesnt have this)
     *Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
    Link for how to  upload below.

    To ensure minidumps are enabled:

    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    Please also run MSinfo32 and upload the output as well.
    To run MSinfo32 please go to start>run>MSinfo32
    Go to "file" "save" and upload the saved file with the DMPS
    (Instructions for XP, Vista, Win 7, Win 8)
    System specs are often useful so include whatever you know

    Wanikiya & Dyami -Team-ZigZag.

    Monday, March 4, 2013 8:03 PM
  • http://rapidshare.com/files/3123971548/2x%20mini%20dump.rar

    this is a dump file

    Monday, March 4, 2013 8:34 PM
  • Rob

    The perms on the link are wrong.  Download permissions are denied by the uploader (you).  Try it again

    Wanikiya & Dyami -Team-ZigZag.

    Monday, March 4, 2013 9:15 PM
  • Oh, i'm really sorry, didn't knew that, here you go:


    check it out when you can, there are two files there (first and second file)
    • Edited by robi4never Monday, March 4, 2013 10:18 PM
    Monday, March 4, 2013 10:16 PM
  • Robi

    These were Related to seehcri.sys seehcri Driver from Sony Ericsson Mobile Communications.  Yours is from 2008.  You  need to re-install the most cureent available driver

    Other old drivers

    seehcri.sys    1/9/2008 12:41:35 AM        fffff880`041f2000    fffff880`041fe000    0x0000c000    0x478488bf                        
    vcd10bus.sys    6/15/2008 11:36:31 PM        fffff880`045c0000    fffff880`045ce000    0x0000e000    0x485617ff                        
    vcsvad.sys    11/16/2008 1:51:18 AM        fffff880`045ce000    fffff880`045d8000    0x0000a000    0x491fed16                        
    avgrkx64.sys    2/24/2009 1:31:25 AM        fffff880`01aef000    fffff880`01af6000    0x00007000    0x49a3be6d                        
    avgfwd6a.sys    3/11/2009 9:23:16 AM        fffff880`01bee000    fffff880`01bf9000    0x0000b000    0x49b7f384                        
    avgtdia.sys    4/6/2009 5:43:58 AM        fffff880`01a2f000    fffff880`01a53000    0x00024000    0x49da071e                        
    spldr.sys    5/11/2009 8:56:27 AM        fffff880`017d3000    fffff880`017db000    0x00008000    0x4a0858bb                        
    avgmfx64.sys    7/1/2009 12:38:25 PM        fffff880`041ac000    fffff880`041b2880    0x00006880    0x4a4bc941                        
    avgldx64.sys    7/9/2009 4:19:20 PM        fffff880`04000000    fffff880`0406e000    0x0006e000    0x4a568908                        

    If I were you I would remove and replace AVG with MSE

    AVG  can be a contributing cause of BSOD'S.
    Please remove and replace with Microsoft Security Essentials at least to test.

    http://www.microsoft.com/security_essentials/"]Microsoft Security Essentials - Free Antivirus for Windows

    How To Find Drivers:
    - search Google for the name of the driver
    - compare the Google results with what's installed on your system to figure out which device/program it belongs to
    - visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
    - if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program

    The most common drivers are listed on this page: Driver Reference



    - - Driver manufacturer links are on this page: http://www.carrona.org

    *** WARNING: Unable to verify timestamp for seehcri.sys
    *** ERROR: Module load completed but symbols could not be loaded for seehcri.sys

    Could not read faulting driver name
    Probably caused by : seehcri.sys ( seehcri+597a )

    fffff880`031d23b8 fffff800`03344cb0 : 00000000`00000050 fffff8a0`05c6a000 00000000`00000000 fffff880`031d2520 : nt!KeBugCheckEx
    fffff880`031d23c0 fffff800`032c4d6e : 00000000`00000000 fffff8a0`05c6a000 00000000`00000000 fffffa80`04d8dc50 : nt! ?? ::FNODOBFM::`string'+0x4518f
    fffff880`031d2520 fffff880`041f797a : fffffa80`04d8dc50 00000000`00000000 fffffa80`04d8dd68 fffff880`031d2800 : nt!KiPageFault+0x16e
    fffff880`031d26b0 fffffa80`04d8dc50 : 00000000`00000000 fffffa80`04d8dd68 fffff880`031d2800 00000000`00000020 : seehcri+0x597a
    fffff880`031d26b8 00000000`00000000 : fffffa80`04d8dd68 fffff880`031d2800 00000000`00000020 fffff800`032cda9f : 0xfffffa80`04d8dc50

    Wanikiya & Dyami -Team-ZigZag.

    Tuesday, March 5, 2013 7:19 PM
  • Page fault in non paged area is usually caused by loose RAMs or unstable overclocks. Check those. Remove and reseat the RAM and check operation.
    Sunday, March 10, 2013 6:49 PM
  • itsarijit

    Did you even look at the DMP files?  He has a 7 year old mobile phone driver in win 7.  If you had looked at the DMPS you would have seen he is not overclocking.

    Wanikiya & Dyami -Team-ZigZag.

    • Marked as answer by tracycai Wednesday, March 13, 2013 6:47 AM
    Monday, March 11, 2013 2:35 AM