locked
is it possible deploying call via work by elastix? or remote call control RRS feed

  • Question

  • hi 
    we use both lync 2013 and elastix 4.2 in our organization is it possible to use elsatix to enble call via work? if ok is any document to do it step by step?
    Thursday, November 9, 2017 6:28 PM

All replies

  • Hi,

    If you can configure a sip trunk from SfB to Elastix, you can use call via work.

    I thin no documentation exist at the moment


    regards Holger Technical Specialist UC

    Thursday, November 9, 2017 9:07 PM
  • Hi Mohammad,

    Agree with Holger,there are no these documents about step by step deploy  call via work both lync 2013 and elastix 4.2.

    I find a link about the Elastix SIP Trunk Configuration Guide,it may help you.

    http://www.voicetrunking.com/sip-trunk/elastix/

    There is a document about the Deploy Call Via Work,you could refer to it.

    https://technet.microsoft.com/en-us/library/dn933908.aspx?f=255&MSPPError=-2147217396


    Regards,

    Leon Lu


    Please remember to mark the replies as answers if they helped.
    If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Friday, November 10, 2017 6:53 AM
  • Are there any update for this issue, if the reply is helpful to you, please try to mark it as an answer, it will help others who has similar issue.

    Regards,

    Leon Lu


    Please remember to mark the replies as answers if they helped.
    If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Tuesday, November 14, 2017 9:33 AM
  • thank you for your reply
    i have configured a sip trunk between lync and elastix
    but dont know how to configure elastix as SIP/CSTA gateway for lync
    Saturday, December 2, 2017 6:48 PM
  • thank you for your reply
    i have configured a sip trunk between lync and elastix
    but dont know how to configure elastix as SIP/CSTA gateway for lync
    Saturday, December 2, 2017 6:48 PM
  • i think the call via work is one of the greatest feature of microsoft UC but few post is related to it
    Saturday, December 2, 2017 6:56 PM
  • Hi Mohammad Mahdi Meysami,

     

    I could not find article about configuring elastix as SIP/CSTA gateway for lync directly, but I find a article about Configuring Lync Server to route to a SIP/CSTA gateway, you could refer to it.

    https://technet.microsoft.com/en-us/library/gg615038%28v=ocs.15%29.aspx?f=255&MSPPError=-2147217396

    You could conntact elastix and ask for a help,

    Thanks for your understanding.


    Regards,

    Leon Lu


    Please remember to mark the replies as answers if they helped.
    If you have feedback for TechNet Subscriber Support, contact tnsf@microsoft.com.

    Monday, December 4, 2017 6:44 AM