locked
Lync 2010 to SfB migration: How could i known which response grroup is enabled?? RRS feed

  • Question

  • One step to migrate Lync 2010 to SfB is migrate RGS configuration

    When I move this configuration, we have duplicate it...(Lync, SfB). I known that I must not delete Lync 2010 RGS configuration..

    My questions are:

    1) How could I know that response group are enabled on SfB and not on Lync 2010 ?

    2) If I need to return previous situation...I suppose that I should do same action changing Source and Destination, not ??

    Sunday, June 5, 2016 10:49 AM

Answers

  • Hi,

    From your description above, did you want to know which Response Group Application host the Lync agents (for Lync 2010 agent and SFB 15 agents)?

    If it is the case, base on my understanding, the Response Group will support the agent in its pool. So in your case, the agents homed at Lync Server 2010 pool will use the Lync Server 2010 pool Response Group.

    You can confirm it by remove one agent from Lync Server 2010 Response Group, and then test if this agent will still work or not. If yes, then this agent host by SFB Response Group, otherwise it host by Lync Server 2010 Response Group.

    Also, it is recommended to export the Response settings for backup.

    Best Regards  


    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

    Eason Huang
    TechNet Community Support

    • Marked as answer by Niko.Cheng Saturday, July 9, 2016 2:43 AM
    Tuesday, June 7, 2016 9:19 AM

All replies

  • If you look through the controlpannel, you could see to which application pool the RGS Group is assigned.

    If you want to create new RGS Group, you should do this on the SFB pool.

    If you have migrate all from Lync 2010 and remove the old Lync 2010 pool, also the Response Groups will be clear from the old pool.


    regards Holger Technical Specialist UC

    Sunday, June 5, 2016 1:40 PM
  • 1) I can see RGS on Lync and SfB. Each one associated with its pool...

    2) I refer that I move RGS from Lync 2010 to SfB. After I need to return RGS to Lync 2010 (for several issues..)


    • Edited by Rivers75 Sunday, June 5, 2016 6:00 PM
    Sunday, June 5, 2016 5:29 PM
  • There is no real go back way. If you want to use the RGS Group on Lync 2010 again, you should delete both Grops an create them new on Lync 2010.

    regards Holger Technical Specialist UC

    Sunday, June 5, 2016 5:34 PM
  • Hi...

    Are you sure? Any official url?

    Sunday, June 5, 2016 6:49 PM
  • You could stop response group service on 2010 frontend servers. Then you will see if it is active on SFB servers. Then reverse it (stop on SFB servers and enable on 2010 servers) to see if it responds to 2010 pool.

    If you run this Lync powershell command:

    Get-CsRgsAgentGroup |select ownerpool

    You see duplicated for each on both 2010 and sfb pool?

    This shouldn't happen when you move response groups:

    Move-CsRgsConfiguration -Source lync-old.domain.local -Destination lync-new.domain.local

    Please check this link for completing post-migration tasks:

    https://technet.microsoft.com/en-us/library/jj204998.aspx?f=255&MSPPError=-2147217396


    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    • Proposed as answer by Liinus Monday, June 6, 2016 12:31 PM
    Monday, June 6, 2016 8:20 AM
  • I had only 1 RGS / 1 Agent Group. After move thais RGS from Lync 2010 to SfB I can see this on SfB server:

    Monday, June 6, 2016 4:56 PM
  • Hi,

    From your description above, did you want to know which Response Group Application host the Lync agents (for Lync 2010 agent and SFB 15 agents)?

    If it is the case, base on my understanding, the Response Group will support the agent in its pool. So in your case, the agents homed at Lync Server 2010 pool will use the Lync Server 2010 pool Response Group.

    You can confirm it by remove one agent from Lync Server 2010 Response Group, and then test if this agent will still work or not. If yes, then this agent host by SFB Response Group, otherwise it host by Lync Server 2010 Response Group.

    Also, it is recommended to export the Response settings for backup.

    Best Regards  


    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

    Eason Huang
    TechNet Community Support

    • Marked as answer by Niko.Cheng Saturday, July 9, 2016 2:43 AM
    Tuesday, June 7, 2016 9:19 AM
  • If I want to return to Lync 2010...is only the solution delete all Response Groups on Lync2010 and SfB and after create them on Lync 2010 ??

    Thursday, June 9, 2016 9:16 AM