locked
IBM vs Windows 2003 SP1 RRS feed

  • Question

  • Adott egy IBM Xseries 236-os típusu szerver. Ebben a vasban volt 5 Gb ram, de kivettem belőle 1 Gb-t mivel Windows Server 2003 + SP1 Standard verzió van rajta ami tudomásom szerint csak 4 Gb ramot tud kezelni.

    Az a gond, hogy most csak 3 Gb ramot lát a Windows amennyivel telepítettem, viszont a bios látja az összes

    4 Gb-t. Memória tesztett nem futtatam végig mert újjak a modulok (remélem jók is). Eredeti IBM mind persze teljesen megérik az áruk.  Már tudom miből él az IBM.

    Mindegy kicsit elkanyarodtam. Esetleg ötlet valaki, hogy hogyan lehetne rábírni a Windows-t hogy mind a 4 Gb-t lássa és használja is.

     

    Thx. Roland

    Wednesday, May 30, 2007 6:51 PM

Answers

  • Megprobalnad a /PAE kapcsolot?

     

    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Standard" /fastdetect /NoExecute=OptOut /PAE

     

     

    Thursday, May 31, 2007 3:04 PM

All replies

  • Mi van a BOOT.INI -ben?
    Thursday, May 31, 2007 7:42 AM
  • A tartalma:

     

    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Standard" /fastdetect /NoExecute=OptOut

    Thursday, May 31, 2007 8:21 AM
  • Megprobalnad a /PAE kapcsolot?

     

    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Standard" /fastdetect /NoExecute=OptOut /PAE

     

     

    Thursday, May 31, 2007 3:04 PM
  • Es egy masik lehetseges ok, egy KB cikkben talaltam:

     

    "If you add more memory to the system, it is possible that the BIOS will recognize the full amount of physical RAM that is installed in the server but that Windows will recognize only a part of the RAM. If the server has a redundant memory feature or a memory mirroring feature that is enabled, the full complement of memory may not be visible to Windows. Redundant memory provides the system with a failover memory bank when a memory bank fails. Memory mirroring splits the memory banks into a mirrored set. Both features are enabled or disabled in the BIOS and cannot be accessed through Windows. To modify the settings for these features, you may have to refer to the system user manual or the OEM Web site. Alternatively, you may have to contact the hardware vendor.

    For example, if you are running a system that has 4 GB of RAM installed and you then add 4 GB of additional RAM, Windows may recognize only 4 GB of physical memory or possibly 6 GB instead of the full 8 GB. The redundant memory feature or the memory mirroring feature may be enabled on the new memory banks without your knowledge. These symptoms are similar to the symptoms that occur when you do not add the /PAE switch to the Boot.ini file."

     

    Szoval bele kellene kukkolni a BIOS-ba is, mi ujsag a memory mirroring beallitasok korul.

     

     

    Thursday, May 31, 2007 3:20 PM
  • Szia,

     

    Sikerult megtalalni a "hianyzo" memoriat? Ha igen, lezarnad a thread-et? Koszi.

     

    Tuesday, June 5, 2007 1:32 PM
  • Tegnap sikerült megoldani.

    Thx.

    Sunday, June 10, 2007 7:34 AM
  • Nagyszeru. Elarulod mi volt a megoldas? (tobb embert is erinthet). Csak mert megjelolted az egyik postodat valasznak, dehat abban - ha jol ertem - az eredeti boot.ini volt.

    Koszi

     

    Sunday, June 10, 2007 11:18 AM
  • Persze.

    A megoldás a boot.ini szerkesztése. A PAE kapcsoló hozzáadásával.

    Mégegyszer köszönöm a tippet.

    Sunday, June 10, 2007 11:23 AM