Configure the Audio codes gateway with Lync Server 2010 - Working fine with TCP but need to change it to TLS RRS feed

  • Question

  • Hi,

    I have a Lync server 2010 RTM setup and I successfully integrated with the Audio codes Media gateway. Both Outgoing and Incoming calls are working fine. But at present the transport between the Mediation server and gateway is happening through TCP. I need to reconfigure the gateway/Mediation Server to work with TLS.

    So I need to know the following details

    Which Port Number I have to use at Topology builder?

    Which Port Number I have to use to in Audio codes Gateway configuration and what need to be configured for TLS?

    Thanks in Advance


    Thanks & Regards Krishnakumar B
    Sunday, December 12, 2010 5:13 PM

All replies

  • Krishna,


    If you have a co-located mediation server your inbound TLS port will be 5067, if it is a free standing mediation it will be 5061.  As far as the audiocodes go, you can set it's inbound TLS port to 5061 (standard) and just define it as such in the topology builder.


    Hope this helps!


    Kevin Peters blog: www.ocsguy.com MVP Communications Server, MCITP: Enterprise Administration | MCTS:OCS | MCSE | MCSA | CCNA
    Sunday, December 12, 2010 6:21 PM