No announcements
Found 1427904 threads
-
2 VotesSiemens HiPath 3800 V8.0 Lync Integration
With Hipath 3800 no real Integration to Lync is possible, the only way is to connect Lync via a Gateway wit T1/E1 Lines and use two different numbers in the ...Answered | 9 Replies | 10104 Views | Created by t_bormuth - Wednesday, March 21, 2012 4:34 PM | Last reply by Holger Bunkradt - Wednesday, July 4, 2012 2:00 PM
-
0 Votes
lync with siemens pbx?
First of all, i don't see siemens hipath in the Lync Certified IP PBX ...Answered | 3 Replies | 7547 Views | Created by shijught - Monday, May 28, 2012 6:54 PM | Last reply by noah.raidermann - Thursday, October 4, 2012 9:05 AM -
1 Votes
Siemens Hipath 4000 v.3 - OCS Miscrosoft
The current list of approved PBX's and gateways can be found here http://technet.microsoft.com/en-us/office/ocs/bb735838.aspx If you check with Siemens ...Answered | 3 Replies | 11810 Views | Created by Lindarov - Friday, February 5, 2010 2:48 PM | Last reply by Johan Delimon - Wednesday, March 17, 2010 12:20 AM -
3 Votes
Lync Integration Direct SIP to Siemens
From my understanding this is all needed to accept call from Lync to Siemens Hipath extensions.Answered | 30 Replies | 21775 Views | Created by JelBoy - Monday, May 2, 2011 11:27 AM | Last reply by Rod.Hay - Friday, November 1, 2013 12:41 PM -
0 Votes
Lync Server Integrate with simens hipath 4000
i will integrate first lync with siemens hipath 3800 and then may be with Hipath 4000..if you had any idea pls let me ...Answered | 6 Replies | 7401 Views | Created by Rajesh V.R - Thursday, January 12, 2012 6:22 AM | Last reply by shijught - Wednesday, July 4, 2012 12:55 PM -
0 Votes
Siemens HiPath 3550/HG1500v8 to Lync
Mediation Server translates signaling and, in some configurations, media between your internal Lync Server VoIP infrastructure and a public switched telephone network (PSTN) gateway ...Answered | 1 Replies | 1921 Views | Created by WBITTS - Monday, February 17, 2014 11:43 PM | Last reply by Lisa.zheng - Wednesday, February 19, 2014 2:10 AM -
0 Votes
Lync 2010 - Enable EV and integrate with Gateway & PBX
Hi,Nitish, As ALANMAD pointed out there are lots of guides about Lync and AudioCodes gateway integration since AudioCodes is a Microsoft partner ...Answered | 4 Replies | 3604 Views | Created by crazylast - Wednesday, June 6, 2012 3:15 PM | Last reply by Sharon.Shen - Thursday, June 7, 2012 10:26 AM -
0 Votes
Lync and PBX call authentication
Hi, You can refer to the following situation: Enterprise Voice Behind the PBX When Enterprise Voice is deployed behind the ...Answered | 2 Replies | 1268 Views | Created by Chandru CT - Monday, December 8, 2014 6:00 AM | Last reply by Eason Huang - Wednesday, December 10, 2014 8:19 AM -
0 Votes
lync 2013 integration with seimens Siemens- OpenScape 4000
I'd reach out to Sonus to see if they have a guide since that's the device that's directly connecting.Answered | 3 Replies | 4023 Views | Created by sarmakumar - Monday, September 29, 2014 6:45 PM | Last reply by Anthony Caragol - Monday, September 29, 2014 9:54 PM -
0 Votes
Lync 2013 integration with Legacy PBX havng same DID number
you can ring the both PBX and Lync Extension but the PBX is capable of Simultaneous ring. so that you Pbx extension and lync extension ...Answered | 2 Replies | 1354 Views | Created by sarmakumar - Sunday, December 14, 2014 7:57 AM | Last reply by Raju_raju - Monday, December 15, 2014 9:39 AM -
0 Votes
Lync 2013 direct integration with siemens openscape ip55g Ip phonw
You need to choose Lync certified IP Phone.Answered | 3 Replies | 1140 Views | Created by sarmakumar - Wednesday, October 29, 2014 8:32 AM | Last reply by Eason Huang - Thursday, October 30, 2014 2:07 AM -
5 Votes
Replacement of Analog PBX with Lync 2013
And the Lync Server 2013 Enterprise Voice can replace the PBX, IPPBX or integrate with PBX for corporation.Answered | 10 Replies | 10746 Views | Created by Abdul Mannan -Bdesh - Saturday, March 2, 2013 12:08 PM | Last reply by QwertyOps - Thursday, April 10, 2014 4:20 PM -
2 Votes
Lync to PBX via CISCO
You can use a Cisco gateway to interop with the PBX and Lync.Answered | 5 Replies | 5750 Views | Created by Anton Chetvergov - Monday, January 23, 2012 10:44 AM | Last reply by Madushka Dias - PFE (MCITP Lync Administrator) - Monday, February 6, 2012 5:17 AM -
2 Votes
Lync and PBX Integration
However, bear in mind that since you're moving from the existing PBX to Lync, to have Lync to 'prime' the incoming calls and redirecting it to the PBX, ...Answered | 8 Replies | 15103 Views | Created by Anwar Mahmood - Thursday, January 5, 2012 6:19 PM | Last reply by Anwar Mahmood - Tuesday, January 10, 2012 11:33 AM -
0 Votes
Lync Cannot Receive Calls
Voice Routing -> Trunk Configuration -> Calling Number Translation rule -> ^\+\d{7}(\d{2}\d+)(;ext=\d{4})?Answered | 7 Replies | 1491 Views | Created by Hasan Reza - Wednesday, January 27, 2016 9:18 PM | Last reply by Eric_YangK - Sunday, February 7, 2016 12:15 PM -
0 Votes
Lync phone/ IP PBX
What's more, for branch site, you may need to deploy a SBA for PSTN call if the network between central site and branch site down.Answered | 2 Replies | 1427 Views | Created by RajithPa - Tuesday, July 7, 2015 4:46 AM | Last reply by Eason Huang - Wednesday, July 8, 2015 3:08 AM -
0 Votes
Lync: Unable to call out through Dialogic Gateway link to Siemens HiPath PBX
If its not the issue detailed above by John then it may be that the routing and SIP peer settings on the Dialogic gateway are not set to accept or route requests to and from the new ...Discussion | 2 Replies | 7078 Views | Created by Semmyk - Thursday, April 12, 2012 5:23 PM | Last reply by NeilCruickshanks - Friday, April 27, 2012 3:43 PM -
1 Votes
Supported IP-PBX for MS Lync
Sometimes it will take just an update in the firmware on the gateway, sometimes it will take a call into the gateway vendor.Answered | 7 Replies | 12504 Views | Created by Jose Osorio R. _ - Monday, April 4, 2011 7:54 PM | Last reply by Richard McGiboney - MSFT - Monday, April 11, 2011 11:12 PM -
1 Votes
Lync Server 2010 Integration with current PBX
Yes , you need a gateway or sip trunk to route PSTN calls.Answered | 14 Replies | 6982 Views | Created by jeff.k11 - Wednesday, August 15, 2012 7:03 PM | Last reply by SBC_Gino - Tuesday, March 5, 2013 9:21 AM -
1 Votes
Lync 2013 integration with old legacy PBX
If voip phone with ext 4123 calls an analog user on legacy pbx, then Lync forwards it to the audiocodes gateway, then the gateway forwards it to ...Answered | 7 Replies | 9563 Views | Created by Kyle A - Wednesday, July 10, 2013 5:55 PM | Last reply by Atif Bilal - Wednesday, January 29, 2014 8:27 AM - Items 1 to 20 of 1427904 Next ›
No announcements
