locked
otro pantallazo azul RRS feed

  • Pregunta

  • *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 50, {ffffffffffffffe0, 0, fffffa600153e801, 0}


    Could not read faulting driver name
    Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_RemoveDeviceHandle+fd )

    Followup: MachineOwner
    ---------

    7: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: ffffffffffffffe0, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffffa600153e801, If non-zero, the instruction address which referenced the bad memory
     address.
    Arg4: 0000000000000000, (reserved)

    Debugging Details:
    ------------------


    Could not read faulting driver name

    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000283e080
     ffffffffffffffe0

    FAULTING_IP:
    USBPORT!USBPORT_RemoveDeviceHandle+fd
    fffffa60`0153e801 8b13            mov     edx,dword ptr [rbx]

    MM_INTERNAL_CODE:  0

    CUSTOMER_CRASH_COUNT:  1

    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

    BUGCHECK_STR:  0x50

    PROCESS_NAME:  System

    CURRENT_IRQL:  0

    TRAP_FRAME:  fffffa600392c680 -- (.trap 0xfffffa600392c680)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=fffffa8012790300 rcx=fffffa80101ab300
    rdx=000000004f444600 rsi=0000000000000000 rdi=fffffa8012790300
    rip=fffffa600153e801 rsp=fffffa600392c810 rbp=0000000000000000
     r8=0000000048706950  r9=00000000000003ee r10=fffffffffffe1fa0
    r11=fffffa80129bd1d0 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe cy
    USBPORT!USBPORT_RemoveDeviceHandle+0xfd:
    fffffa60`0153e801 8b13            mov     edx,dword ptr [rbx] ds:a050:fffffa80`12790300=????????
    Resetting default scope

    LAST_CONTROL_TRANSFER:  from fffff80002679361 to fffff8000266a390

    STACK_TEXT: 
    fffffa60`0392c588 fffff800`02679361 : 00000000`00000050 ffffffff`ffffffe0 00000000`00000000 fffffa60`0392c680 : nt!KeBugCheckEx
    fffffa60`0392c590 fffff800`02668f19 : 00000000`00000000 fffffa60`01512807 fffffa80`101ab000 ffffffff`ffffffe0 : nt!MmAccessFault+0x1371
    fffffa60`0392c680 fffffa60`0153e801 : fffffa80`127703d8 fffffa80`127903e0 fffffa80`1266b420 fffffa80`129bb060 : nt!KiPageFault+0x119
    fffffa60`0392c810 fffffa60`0151feb1 : fffffa80`446d6572 fffffa80`101aa1a0 fffffa80`129bb1b0 fffffa80`12186050 : USBPORT!USBPORT_RemoveDeviceHandle+0xfd
    fffffa60`0392c860 fffffa60`0676857f : fffffa80`564d4552 00000000`00000100 fffffa80`129bb1b0 fffffa80`12186050 : USBPORT!USBPORTBUSIF_RemoveUsbDevice+0xc5
    fffffa60`0392c890 fffffa60`0674bf62 : fffffa80`129bb1b0 fffffa80`129bb060 fffffa80`12186050 fffffa60`0673eb82 : usbhub!UsbhUnlinkPdoDeviceHandle+0x153
    fffffa60`0392c8f0 fffffa60`0674bbb9 : fffffa80`12186050 fffffa80`129bb060 00000000`00000017 fffffa80`121869c8 : usbhub!UsbhDeregisterPdo+0x17e
    fffffa60`0392c940 fffffa60`06741f1c : fffffa80`129bb060 fffffa80`121c2aa0 00000000`7250444f fffffa80`12186050 : usbhub!Usbh_Disconnect_PdoEvent+0x7d
    fffffa60`0392c980 fffffa60`06740790 : 00000000`00000000 fffffa80`50447100 fffffa80`121c2aa0 00000000`00000001 : usbhub!Usbh_PCE_BusDisconnect_Action+0x1c4
    fffffa60`0392c9d0 fffffa60`067456b3 : fffffa80`12186050 00000000`00000004 fffffa80`121869c8 00000000`00000002 : usbhub!UsbhDispatch_PortChangeQueueEventEx+0x178
    fffffa60`0392ca10 fffffa60`0673e2b9 : 00000000`00000002 fffffa80`121869c8 fffffa60`01d99180 00000000`00000000 : usbhub!UsbhPCE_BusDisconnect+0xaf
    fffffa60`0392ca60 fffffa60`0673de37 : 00000000`00000000 fffffa80`12186050 fffffa80`12186050 fffffa80`121869c8 : usbhub!UsbhBusDisconnect_Action+0x59
    fffffa60`0392caa0 fffffa60`0673e0d0 : fffffa80`121861a0 fffffa80`12186050 00000000`0000000b fffffa80`12186900 : usbhub!Usbh_BS_BusPause+0xc7
    fffffa60`0392cae0 fffffa60`0673e9de : fffffa80`121869c8 fffffa80`121869c8 fffffa80`121861a0 fffffa80`12186050 : usbhub!UsbhDispatch_BusEvent+0x154
    fffffa60`0392cb30 fffffa60`06754182 : 00000000`00000000 00000000`32737248 fffffa60`0392cc00 fffffa80`12600030 : usbhub!UsbhSyncBusDisconnect+0x42
    fffffa60`0392cb70 fffffa60`06753d08 : 00000000`00000000 fffffa80`121861a0 fffffa80`00000014 00000000`00000004 : usbhub!UsbhHardReset_Action+0x5e
    fffffa60`0392cbe0 fffffa60`0675404f : fffffa80`121861a0 00000000`00000003 fffffa80`121869c8 fffffa60`06754300 : usbhub!Usbh_HRS_Queued+0xe0
    fffffa60`0392cc20 fffffa60`0673b89b : fffffa80`121861a0 fffff800`027a78f8 fffffa80`12186050 fffff800`0287e95e : usbhub!UsbhDispatch_HardResetEvent+0x1fb
    fffffa60`0392cc80 fffff800`028d389f : fffffa80`12186050 fffffa80`121ebbb0 fffffa80`12645640 fffffa80`121ebbb0 : usbhub!UsbhHubWorker+0x63
    fffffa60`0392ccc0 fffff800`0267705a : fffff800`0287e714 fffff880`00cd1801 fffff800`027a7800 fffffa80`00000001 : nt!IopProcessWorkItem+0x27
    fffffa60`0392ccf0 fffff800`0288df73 : fffffa80`124ac720 fffffffe`9a5f4400 fffffa80`121ebbb0 00000000`00000080 : nt!ExpWorkerThread+0x11a
    fffffa60`0392cd50 fffff800`026a4526 : fffffa60`01d99180 fffffa80`121ebbb0 fffffa60`01da2d40 00000000`00000001 : nt!PspSystemThreadStartup+0x57
    fffffa60`0392cd80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


    STACK_COMMAND:  kb

    FOLLOWUP_IP:
    USBPORT!USBPORT_RemoveDeviceHandle+fd
    fffffa60`0153e801 8b13            mov     edx,dword ptr [rbx]

    SYMBOL_STACK_INDEX:  3

    SYMBOL_NAME:  USBPORT!USBPORT_RemoveDeviceHandle+fd

    FOLLOWUP_NAME:  MachineOwner

    MODULE_NAME: USBPORT

    IMAGE_NAME:  USBPORT.SYS

    DEBUG_FLR_IMAGE_TIMESTAMP:  479199d8

    FAILURE_BUCKET_ID:  X64_0x50_USBPORT!USBPORT_RemoveDeviceHandle+fd

    BUCKET_ID:  X64_0x50_USBPORT!USBPORT_RemoveDeviceHandle+fd

    Followup: MachineOwner
    ---------

     

    miércoles, 15 de octubre de 2008 21:40

Respuestas

  •  raul.mh Escribió:

    IMAGE_NAME:  USBPORT.SYS


    Pues está claro: un dispositivo USB o algo relacionado con el USB. ¿cuando te ha dato, en mitad de una sesion o al iniciar / apagar la maquina?

    Un saludo,
    miércoles, 15 de octubre de 2008 21:42
  • No es grave hombre!  . Que parece que lo dices compungido...

    Las veces que he visto este error al arrancar ha sido por alguna cable USB o por algun HUB intermedio si tuvieses que estan dañados. Cambia los cables... y no uses "extensores" de los cables que mucha gente tiene costumbre. Verás como no vuelve a pasar.

    Un saludo,
    miércoles, 15 de octubre de 2008 21:45

Todas las respuestas

  •  raul.mh Escribió:

    IMAGE_NAME:  USBPORT.SYS


    Pues está claro: un dispositivo USB o algo relacionado con el USB. ¿cuando te ha dato, en mitad de una sesion o al iniciar / apagar la maquina?

    Un saludo,
    miércoles, 15 de octubre de 2008 21:42
  • Ha sido al encenderlo.

     

    Es la primera vez que me da algo así. Nunca habia sido durante el arranque.

     

    miércoles, 15 de octubre de 2008 21:43
  • No es grave hombre!  . Que parece que lo dices compungido...

    Las veces que he visto este error al arrancar ha sido por alguna cable USB o por algun HUB intermedio si tuvieses que estan dañados. Cambia los cables... y no uses "extensores" de los cables que mucha gente tiene costumbre. Verás como no vuelve a pasar.

    Un saludo,
    miércoles, 15 de octubre de 2008 21:45