none
Creating monitor in Operations Manager 2007 R2 to monitor hard disk failures RRS feed

Respuestas

  • You will need to create a custom management pack

     

    http://blogcastrepository.com/level5/scom/archive/2008/06/04/creating-a-basic-management-pack.aspx

    http://www.rn.co.za/html/?p=100


    Santos Martinez, MCSE, MCDBA, MCTS, MCITP MVP - SCCM http://www.mvplatino.ms/blogs/smartinezpr santosmvp@live.com
    • Marcado como respuesta Ismael Borche lunes, 4 de abril de 2011 16:19
    martes, 5 de octubre de 2010 15:34

Todas las respuestas

  • You can create your custom Management Pack for this value if its not already on it. But your question have a small lack of information. Are you talking about the SMART Enable Setting on the BIOS for Hard Drives?
    Santos Martinez, MCSE, MCDBA, MCTS, MCITP MVP - SCCM http://www.mvplatino.ms/blogs/smartinezpr santosmvp@live.com
    jueves, 23 de septiembre de 2010 16:12
  • Thanks for answering, I'll explain in detail what is required:
    You must create a monitor that tells me if a hard drive is faulty or are at risk of harm, there are tools that make a diagnosis based on the SMART delivery data to determine the risk of damage to hard drives.

    So the idea is to create a monitor that through SMART delivering data that can be obtained via WMI, which alerted me to prevent hard drive damage.
    viernes, 24 de septiembre de 2010 0:15
  • You will need to create a custom management pack

     

    http://blogcastrepository.com/level5/scom/archive/2008/06/04/creating-a-basic-management-pack.aspx

    http://www.rn.co.za/html/?p=100


    Santos Martinez, MCSE, MCDBA, MCTS, MCITP MVP - SCCM http://www.mvplatino.ms/blogs/smartinezpr santosmvp@live.com
    • Marcado como respuesta Ismael Borche lunes, 4 de abril de 2011 16:19
    martes, 5 de octubre de 2010 15:34