locked
About EdgeSync RRS feed

  • Question

  • Hi guys,

    i am using exchange 2010 and have a problem with my 2 edge server in DMZ (standalone no domain) and hub server (joined to domain).

    Basically when a launch a Start-EdgeSynchronization on Hub have the follow errror :

    RunspaceId     : dbc1b5ce-2d8a-4393-96af-49e6dc296ccd
    Result         : CouldNotConnect
    Type           : Recipients
    Name           : myedge02
    FailureDetails :
    StartUTC       : 22/03/2011 12:58:28
    EndUTC         : 22/03/2011 12:58:28
    Added          : 0
    Deleted        : 0
    Updated        : 0
    Scanned        : 0
    TargetScanned  : 0

    and if i launch  "Test-EdgeSynchronization" command have:

    RunspaceId                  : a6a6673a-2240-491b-9ae0-5ee1273d9a56
    SyncStatus                  : Failed
    UtcNow                      : 22/03/2011 12:32:58
    Name                        : myedge02
    LeaseHolder                 :
    LeaseType                   : None
    FailureDetail               : EdgeSync service cannot connect to this subscription because of error "No EdgeSync creden
                                  tials were found for Edge transport server vm-exsmtp02.mydomain.local on the local Hub Tr
                                  ansport server. Remove the Edge subscription and re-subscribe the Edge Transport server."
                                  .

    What' s wrong ?

    Thanks in advance.


    • Edited by Alter1974 Tuesday, March 22, 2011 6:23 PM
    Tuesday, March 22, 2011 1:01 PM

Answers

  • Hi guys,

    today, after have read a lot of documents and other customers discussions  i have fixed the problem!

    To fix it i have done:

    -remove all 2 hub server certificate
    -generate e new hub server certificate with command "New-ExchangeCertificate"
    -remove the edge subscription on hub & edge server
    -rigenereted a XMl subscripton and import it on hub server.

    bye.

     


    • Marked as answer by Alter1974 Monday, March 28, 2011 2:04 PM
    Monday, March 28, 2011 2:01 PM

All replies

  • Did you subscribe the second Edge Transport server with your AS Site containing your Hub Transport Servers?

    One or more Edge Transport servers can be subscribed to a single Active Directory site. However, an Edge Transport server can't be subscribed to more than one Active Directory site. If you have more than one Edge Transport server deployed, each server can be subscribed to a different Active Directory site. Each Edge Transport server requires an individual Edge Subscription.


    Jesper Bernle | Blog: http://xchangeserver.wordpress.com
    Tuesday, March 22, 2011 1:20 PM
  • Hi Jesper,

    thanks for your reply.

    The Edge Server are configured as standalone in dmz and need work with HUB Server in exist domain.

    Now i have removed the existent subscription for all 2 Edge Server and make a new one with the command:

    New-EdgeSubscription -Site "Default-First-Site-Name" -Filename "myfile.xml"

    only on 1 Edge server.

    After i connect to one HUB and create a new subscription from HUB using a previous files, but if i try to start the Sync have the same error:

    RunspaceId     : b820a3e2-cca1-419e-a15c-0d1a37704e4d
    Result         : CouldNotConnect
    Type           : Recipients
    Name           : myedge02
    FailureDetails :
    StartUTC       : 22/03/2011 14:28:27
    EndUTC         : 22/03/2011 14:28:27
    Added          : 0
    Deleted        : 0
    Updated        : 0
    Scanned        : 0
    TargetScanned  : 0

    RunspaceId     : b820a3e2-cca1-419e-a15c-0d1a37704e4d
    Result         : CouldNotConnect
    Type           : Configuration
    Name           : myedge02
    FailureDetails :
    StartUTC       : 22/03/2011 14:28:27
    EndUTC         : 22/03/2011 14:28:27
    Added          : 0
    Deleted        : 0
    Updated        : 0
    Scanned        : 0
    TargetScanned  : 0

    [PS] C:\>Test-EdgeSynchronization


    RunspaceId                  : b820a3e2-cca1-419e-a15c-0d1a37704e4d
    SyncStatus                  : Failed
    UtcNow                      : 22/03/2011 14:28:37
    Name                        : myedge02
    LeaseHolder                 :
    LeaseType                   : None
    FailureDetail               : EdgeSync service cannot connect to this subscription because of error "No EdgeSync creden
                                  tials were found for Edge transport server myedge02.mydomain.local on the local Hub Tr
                                  ansport server. Remove the Edge subscription and re-subscribe the Edge Transport server."
                                  .
    LeaseExpiryUtc              : 01/01/0001 00:00:00
    LastSynchronizedUtc         : 01/01/0001 00:00:00
    TransportServerStatus       : Skipped
    TransportConfigStatus       : Skipped
    AcceptedDomainStatus        : Skipped
    RemoteDomainStatus          : Skipped
    SendConnectorStatus         : Skipped
    MessageClassificationStatus : Skipped
    RecipientStatus             : Skipped
    CredentialRecords           : Number of credentials 0
    CookieRecords               : Number of cookies 0

    What's happend ?

    Thanks in advance.

     

     


    • Edited by Alter1974 Tuesday, March 22, 2011 6:24 PM
    Tuesday, March 22, 2011 2:30 PM
  • News ?

    I think that is happen because i set a subscribe before insert a license key on edge and hub server . It' s possible ?

    I have tried to remove a subscripton from hub and edge and recreate but nothing ...if i lunch a test i have always the same error:

    FailureDetail               : EdgeSync service cannot connect to this subscription because of error "No EdgeSync creden
                                  tials were found for Edge transport server myedge02 on the local Hub Tr
                                  ansport server. Remove the Edge subscription and re-subscribe the Edge Transport server."
                                  .

    Any idea ?

     

    Bye.

    Tuesday, March 22, 2011 6:23 PM
  • Create a new certificate on both Hub and Edge. While on Edge, create a new subscription and import that file onto the Hub. Let us know if that works.
    Tuesday, March 22, 2011 7:00 PM
  • Do you intend a server-certificate? How i can do it ?

    Thank so much.

    Tuesday, March 22, 2011 8:18 PM
  • Does this issue happen on both Edge servers or just myedge02.mydomain.local? Have you replaced the certificates installed by default during setup?
    Jesper Bernle | Blog: http://xchangeserver.wordpress.com
    Wednesday, March 23, 2011 8:06 AM
  • on both :(

    I didn't replace the defautl certificate during setup.

    bye.

    Wednesday, March 23, 2011 9:49 AM
  • Here's some interesting steps to take - Edgesync Credentials Not Found For Edge Transport 

    Try them out to see if it might be the same issue for you.


    Jesper Bernle | Blog: http://xchangeserver.wordpress.com
    Thursday, March 24, 2011 6:21 PM
  • Hi Jose,

    i try to unscribe on HUB and  recreate a certificate only on "Edge Server" with :

    a.       Open up an empty mmc console (Run -> mmc)
    b.      Select File -> Add / Remove Snap-in
    c.       Hit Add
    d.      Select “Certificates” from the List of Snap-Ins available, and hit Add.
    e.      Select “Service Account” on the “Certificates Snap-In” page, click next.
    f.        Select  “Local Computer” on the “Select Computer” page, click next.
    g.       Select “Microsoft Exchange ADAM” from the list of services, click Finish.
    h.      Close the “Add Snap-in” dialog.
    i.         Navigate to “Certifcates – Service” -> “ADAM_MSExchange\Personal” -> Certificates
    j.        You should see a single certificate here. Remove it.
    h.  restart MS ADAM Exchange

    Unscribe on Edge and create a newsubscription and import it on hub but not works.

    How i can create a new certificate on HUB Server ?

    Why the edgesync doesnt work ? I'am going crazy!!

    Thanks in advance.

     


    Thursday, March 24, 2011 6:29 PM
  • Hi Jespher ,

    thanks for you reply.

    I see your link and have hecked for a HUB certificate with the command:

    [PS] C:\Windows\system32>Get-ExchangeCertificate

    Thumbprint                                Services   Subject
    ----------                                --------   -------
    7312CC21FCA3F17D786259E9FDE4FE3FC8AC29D2  IP.W..     CN=webmail.mydomain.com, OU=XXXX, O=MyCompany, L=London, S=UK...
    7AAED044D2BA33402BD2356EA6A00CEFBFD909D3  ....S.     CN=MY-HUB02
    0A752915B33A5C7A3F3E9651E4110EBFAC064683  ....S.     CN=MY-HUB02

    and  found 2 server certificate fo MY-HUB02

    Maybe this the problem ?

    Thanks in advance.

    Thursday, March 24, 2011 9:17 PM
  • Having multiple certificates in the store shouldn't be a problem. Missing certificates all together would.

    Reading the error message "EdgeSync service cannot connect to this subscription because of error "No EdgeSync credentials were found for Edge transport server myedge02 on the local Hub Transport server." indicates that perhaps there's something wrong, like missing certificate, on myedge02.

    Please run Get-ExchangeCertificate on your Edge servers and let us know the result.


    Jesper Bernle | Blog: http://xchangeserver.wordpress.com
    Thursday, March 24, 2011 10:12 PM
  • Hi Jesper,

    thanks for your reply, follow the output for Get-ExchangeCertificate :

    [PS] C:\Windows\system32>Get-ExchangeCertificate

    Thumbprint                                Services   Subject
    ----------                                --------   -------
    0529D4A6C46E5CF3343E2556B852B4DE4D9FB833  ....S.     CN=my-edge02

    There is a wrong ?

    Thanks in advance.

    Friday, March 25, 2011 10:15 AM
  • Hi guys,

    it's possible that the cause is a changed primary ip-address that i need to do on my hub server ?

    I have changed only a primary ipaddress on HUB server  (nothing change to netbios name or domain)  and after  i installed a new edge server and tried to subscribe but have the problem above.

    After ip-address changed i have also reboot the server ,  check the log for error and verify the name resolution for a dns or netbios problem but all seems ok.

    Also the firewall rule beetween the HUB and EDGE are ok.

    What's happen ?

    Thanks in advance.

     


    • Marked as answer by Gavin-Zhang Saturday, March 26, 2011 8:40 AM
    • Unmarked as answer by Alter1974 Sunday, March 27, 2011 4:44 PM
    Friday, March 25, 2011 3:19 PM
  • By what means does your Edge Servers resolve your Hub Transport servers? If it is by entries in the local HOSTS file then you need to update the entries to reflect your changed IP address on the Hub. If by DNS make sure the IP address comes back ok by using NSLOOKUP.

    Perhaps you nees to run Ipconfig /flushdns on the servers.


    Jesper Bernle | Blog: http://xchangeserver.wordpress.com
    Sunday, March 27, 2011 9:01 AM
  • Hi Jesper,

    how i indicated in my previuos reply the name resolution (forward, reverse etc..) between hub and transport work fine :(

    Any other idea for the issue ?

    Thanks.

     



    Sunday, March 27, 2011 4:44 PM
  • Hi guys,

    today, after have read a lot of documents and other customers discussions  i have fixed the problem!

    To fix it i have done:

    -remove all 2 hub server certificate
    -generate e new hub server certificate with command "New-ExchangeCertificate"
    -remove the edge subscription on hub & edge server
    -rigenereted a XMl subscripton and import it on hub server.

    bye.

     


    • Marked as answer by Alter1974 Monday, March 28, 2011 2:04 PM
    Monday, March 28, 2011 2:01 PM
  • Hi guys,

    today, after have read a lot of documents and other customers discussions  i have fixed the problem!

    To fix it i have done:

    -remove all 2 hub server certificate
    -generate e new hub server certificate with command "New-ExchangeCertificate"
    -remove the edge subscription on hub & edge server
    -rigenereted a XMl subscripton and import it on hub server.

    bye.

    Great! Thanks for posting the solution.
    Jesper Bernle | Blog: http://xchangeserver.wordpress.com
    Monday, March 28, 2011 2:33 PM
  • I would create a new certificate on both Edge and Hub. While on Edge, create a subscription and imported it on your Hub.
    Thursday, March 31, 2011 3:51 PM