locked
Install Exchange 2013 setup: fails at step 2 of 14 (Copy Exchange files) RRS feed

  • Question

  • Hello,

    I’ve got the same error that is reported in another thread: “Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337. '. »

    Prerequisite passed. Step 2 (copy Exchange files) of 14 stops at 90% and then reverts back.

    Fresh domain controller with AD services (W2K8r2 with SP1) on a server (A), fresh Win2k8r2 with SP1 on another server (B) on with Exchange is being installed.

    Added after initial post: I just noticed that Exchange Organization screen is not presented (just after Installation Space and Location)

    AD has been prepared as described in TechNet documentation (http://technet.microsoft.com/fr-FR/library/bb691354(v=exchg.150).aspx)

    Prerequisites have been applied to server B.

    Running setup.exe under admin elevated rights.

    All Windows updates applied.

    What else?

    Thanks for your support

    Nicolas





    • Edited by Nic75 Tuesday, October 8, 2013 5:31 PM
    Tuesday, October 8, 2013 5:15 PM

Answers

All replies

  • Would you please verify that you have installed all the pre-requisites for Exchange 2013 on Windows Server 2012?You can run the install-WidnowsFeatures command with required features to install them,check the following link to get more details.

    http://exchangeserverpro.com/install-exchange-2013-pre-requisites-windows-server-2012

    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.

    If not the case,you can try to run  Sn.exe –Vr * on command window to see if it fixes the installation issue.Check this old thread for the similar error code 1603 http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/5ea8765f-d228-42b1-8d23-470d458b23e9/

    If still no luck,I suggest you to enable windows installing log to see if there are any clews.

    How to enable Windows Installer logging http://support.microsoft.com/default.aspx?scid=223300


    Dinesh S.

    Tuesday, October 8, 2013 6:31 PM
  • Ok I'll do that. Fyi all servers are Win2K8r2 with SP1. Is it the same link?

    Second link seems to be broken.

    Nicolas



    • Edited by Nic75 Tuesday, October 8, 2013 6:56 PM
    Tuesday, October 8, 2013 6:53 PM
  • Please try and update for further investigation.

    Dinesh S.

    Tuesday, October 8, 2013 6:54 PM
  • As I said in the previous post the first link is wrong. So I reapplied the prerequisites for WIN 2K8 R2 with SP1. The return code is no change which means that prerequisites were already applied.

    As I said in my previous post the 2nd link is broken, so I don't know how to apply Sn.exe –Vr *

    I understand that after the screen Installation Space and Location, Exchange Organization Screen should be displayed, which is not the case. This is the first Exchange organisation. Please advise on this specific point.

    Please review the install log files hereunder. Thank you for your support

    Nicolas

    --------

    There are two log files

    === Verbose logging started: 09/10/2013  08:22:29  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Windows\Temp\ExchangeSetup\ExSetupUI.exe ===
    MSI (c) (38:B0) [08:22:29:227]: Cloaking enabled.
    MSI (c) (38:B0) [08:22:29:227]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (38:B0) [08:22:29:242]: End dialog not enabled
    MSI (c) (38:B0) [08:22:29:258]: Original package ==> F:\exchangeserver.msi
    MSI (c) (38:B0) [08:22:29:258]: Package we're running from ==> F:\exchangeserver.msi
    MSI (c) (38:B0) [08:22:29:305]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (38:B0) [08:22:29:305]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (c) (38:B0) [08:22:29:305]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'.
    MSI (c) (38:B0) [08:22:29:320]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (38:B0) [08:22:29:414]: MSCOREE already loaded, using loaded copy
    MSI (c) (38:B0) [08:22:29:429]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'.
    MSI (c) (38:B0) [08:22:29:429]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (38:B0) [08:22:29:429]: Transforms are not secure.
    MSI (c) (38:B0) [08:22:29:429]: Note: 1: 2205 2:  3: Control
    MSI (c) (38:B0) [08:22:29:429]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\ADMINI~1.M10\AppData\Local\Temp\2\MSIad90f.LOG'.
    MSI (c) (38:B0) [08:22:29:429]: No Command Line.
    MSI (c) (38:B0) [08:22:29:429]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{5EB83C0B-A64C-4858-8BCF-14CD8CD75CE7}'.
    MSI (c) (38:B0) [08:22:29:429]: Product Code passed to Engine.Initialize:           '(none)'
    MSI (c) (38:B0) [08:22:29:429]: Product Code from property table before transforms: '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'
    MSI (c) (38:B0) [08:22:29:429]: Product Code from property table after transforms:  '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'
    MSI (c) (38:B0) [08:22:29:429]: Product not registered: beginning first-time install
    MSI (c) (38:B0) [08:22:29:429]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (c) (38:B0) [08:22:29:429]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (38:B0) [08:22:29:429]: User policy value 'DisableMedia' is 0
    MSI (c) (38:B0) [08:22:29:429]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (38:B0) [08:22:29:429]: Adding new sources is allowed.
    MSI (c) (38:B0) [08:22:29:429]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (c) (38:B0) [08:22:29:429]: Package name extracted from package path: 'exchangeserver.msi'
    MSI (c) (38:B0) [08:22:29:429]: Package to be registered: 'EXCHANGESERVER.msi'
    MSI (c) (38:B0) [08:22:29:445]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (c) (38:B0) [08:22:29:445]: TRANSFORMS property is now:
    MSI (c) (38:B0) [08:22:29:445]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '405'.
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Favorites
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Documents
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Local
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Pictures
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Desktop
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (c) (38:B0) [08:22:29:445]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (c) (38:B0) [08:22:29:445]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (c) (38:B0) [08:22:29:461]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
    MSI (c) (38:B0) [08:22:29:461]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (c) (38:B0) [08:22:29:461]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (c) (38:B0) [08:22:29:461]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (c) (38:B0) [08:22:29:461]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (38:B0) [08:22:29:461]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
    MSI (c) (38:B0) [08:22:29:461]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (38:B0) [08:22:29:461]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'F:\exchangeserver.msi'.
    MSI (c) (38:B0) [08:22:29:461]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\exchangeserver.msi'.
    MSI (c) (38:B0) [08:22:29:461]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (c) (38:B0) [08:22:29:461]: EEUI - Disabling MsiEmbeddedUI in quiet mode
    === Logging started: 09/10/2013  08:22:29 ===
    MSI (c) (38:B0) [08:22:29:461]: Machine policy value 'DisableRollback' is 0
    MSI (c) (38:B0) [08:22:29:461]: User policy value 'DisableRollback' is 0
    MSI (c) (38:B0) [08:22:29:461]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    MSI (c) (38:B0) [08:22:29:461]: Creating MSIHANDLE (1) of type 790537 for thread 688
    MSI (c) (38:B0) [08:22:29:461]: MsiOpenPackageEx is returning 0
    MSI (c) (38:B0) [08:22:29:461]: Closing MSIHANDLE (1) of type 790537 for thread 688
    === Verbose logging stopped: 09/10/2013  08:22:29 ===

     --------------------

    === Verbose logging started: 09/10/2013  08:22:29  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Windows\Temp\ExchangeSetup\ExSetupUI.exe ===
    MSI (c) (38:B0) [08:22:29:507]: Cloaking enabled.
    MSI (c) (38:B0) [08:22:29:507]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (38:B0) [08:22:29:507]: End dialog not enabled
    MSI (c) (38:B0) [08:22:29:507]: Original package ==> F:\exchangeserver.msi
    MSI (c) (38:B0) [08:22:29:507]: Package we're running from ==> F:\exchangeserver.msi
    MSI (c) (38:B0) [08:22:29:523]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (c) (38:B0) [08:22:29:523]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'.
    MSI (c) (38:B0) [08:22:29:523]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (38:B0) [08:22:29:523]: MSCOREE already loaded, using loaded copy
    MSI (c) (38:B0) [08:22:29:523]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'.
    MSI (c) (38:B0) [08:22:29:523]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (38:B0) [08:22:29:523]: Transforms are not secure.
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\ADMINI~1.M10\AppData\Local\Temp\2\MSIad910.LOG'.
    MSI (c) (38:B0) [08:22:29:523]: No Command Line.
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{5EB83C0B-A64C-4858-8BCF-14CD8CD75CE7}'.
    MSI (c) (38:B0) [08:22:29:523]: Product Code passed to Engine.Initialize:           '(none)'
    MSI (c) (38:B0) [08:22:29:523]: Product Code from property table before transforms: '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'
    MSI (c) (38:B0) [08:22:29:523]: Product Code from property table after transforms:  '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'
    MSI (c) (38:B0) [08:22:29:523]: Product not registered: beginning first-time install
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (c) (38:B0) [08:22:29:523]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (38:B0) [08:22:29:523]: User policy value 'DisableMedia' is 0
    MSI (c) (38:B0) [08:22:29:523]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (38:B0) [08:22:29:523]: Adding new sources is allowed.
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (c) (38:B0) [08:22:29:523]: Package name extracted from package path: 'exchangeserver.msi'
    MSI (c) (38:B0) [08:22:29:523]: Package to be registered: 'EXCHANGESERVER.msi'
    MSI (c) (38:B0) [08:22:29:523]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (c) (38:B0) [08:22:29:523]: TRANSFORMS property is now:
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '405'.
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Favorites
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Documents
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Local
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Pictures
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Users\administrator.M104\Desktop
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (c) (38:B0) [08:22:29:523]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (c) (38:B0) [08:22:29:523]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (c) (38:B0) [08:22:29:523]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
    MSI (c) (38:B0) [08:22:29:523]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (c) (38:B0) [08:22:29:523]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
    MSI (c) (38:B0) [08:22:29:523]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'F:\exchangeserver.msi'.
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\exchangeserver.msi'.
    MSI (c) (38:B0) [08:22:29:523]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (c) (38:B0) [08:22:29:523]: EEUI - Disabling MsiEmbeddedUI in quiet mode
    === Logging started: 09/10/2013  08:22:29 ===
    MSI (c) (38:B0) [08:22:29:523]: Machine policy value 'DisableRollback' is 0
    MSI (c) (38:B0) [08:22:29:523]: User policy value 'DisableRollback' is 0
    MSI (c) (38:B0) [08:22:29:523]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    MSI (c) (38:B0) [08:22:29:523]: Creating MSIHANDLE (2) of type 790537 for thread 688
    MSI (c) (38:B0) [08:22:29:523]: MsiOpenPackageEx is returning 0
    MSI (c) (38:B0) [08:22:29:523]: Closing MSIHANDLE (2) of type 790537 for thread 688
    === Verbose logging stopped: 09/10/2013  08:22:29 ===

     

     



    • Edited by Nic75 Wednesday, October 9, 2013 7:04 AM
    Wednesday, October 9, 2013 6:06 AM
  • Hi,
    You are running the installation from F: ...
    Is that a mounted ISO? If so, pls download the latest Exchange 2013 Build (right now CU2), extract the files and run it locally.

    Exchange Server 2013 RTM CU2
    http://www.microsoft.com/en-us/download/details.aspx?id=39609

    Martina Miskovic

    • Marked as answer by Nic75 Wednesday, October 9, 2013 9:25 PM
    Wednesday, October 9, 2013 6:21 AM
  • Thanks Martina. Indeed this is a mounted ISO file. I'll do what is advised and keep you posted.

    Nicolas





    • Edited by Nic75 Wednesday, October 9, 2013 8:20 PM
    Wednesday, October 9, 2013 4:31 PM
  • Step 2 passed!!

    I will continue set-up and keep you posted on the final results

    Many thanks so far

    Nicolas

    Wednesday, October 9, 2013 8:26 PM
  • Installation finalized and server running. Need to set-up user boxes now. Thanks again

    Nicolas

    Wednesday, October 9, 2013 9:24 PM
  • Installation finalized and server running. Need to set-up user boxes now. Thanks again

    Nicolas


    That was good news Nicolas, Thanks for the update!
    Enjoy EX13 :)

    Martina Miskovic

    Thursday, October 10, 2013 4:33 AM