none
Reboot and select proper boot device or insert boot media in select boot device.... RRS feed

  • Question

  • 64 -bit home to ultimate (Or Xp Mode) Changes- 64-Bit....

    Gigabyte -uefi bios m.i.t status and full support(legacy only,uefi only,,pxe rom,network stack,vga,usb,ps,storage mode) bios

    Sata hard drive toshiba 1tb

    Today,  there is a first "İnactive pimary partition"  problem find...    

    Today, there is a second "bios cannot find dvd-rw/cd rom drive"  second problem find   Or  Bios cannot find Win7 setup dvd installation disc                              



    • Edited by ylma87 Sunday, September 15, 2019 9:38 PM
    Sunday, September 15, 2019 9:34 PM

All replies

  • Hi,

    According to your description, please try to check if any latest BIOS firmware from your motherboard’s support page. If so, update it then check the issue.

    Best Regards,



    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Tuesday, September 17, 2019 3:56 AM
  • In BIOS/Boot Priority/select C: HD as 1st,save & exit BIOS.The other option,tap the F8 key,on pc start-up,select safe-mode/normal/in desktop run,type: Msconfig edit the start up selection.
    Tuesday, September 17, 2019 4:39 AM
  • İ5- 3D GİGABYTE UEFİ/BİOS M.İ.T,  Pxe mof exiting,  pxe rom no bootable device.....

    Window 7 dvd media İnstallation DVD - Reboot and select proper boot device or insert boot media in select boot device

    exiting pxe rom no boot device found /or network boot,Realtek Pxe rom
    • Edited by ylma87 Friday, September 27, 2019 3:12 PM
    Sunday, September 22, 2019 8:46 AM
  • Extended partition exitist,from testdisk....And   LOST LOGİCAL DRİVE ( E drive lost)

    C,D,E,F,G, drive lost

    I'm problem troubleshoots  from,parted magic(UEFİ Boot cd) and win7x86 pe buılder-winpe boot cd's
    • Edited by ylma87 Thursday, October 3, 2019 5:28 PM
    Sunday, September 29, 2019 4:34 PM
  • Hi, 

    Was your issue resolved? 

    If you need any help, feel free to let us know. 

    Best regards. 


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Friday, October 4, 2019 2:31 AM
  • no solution, I'm sorry...

    But         finish no problem

    Friday, October 11, 2019 9:13 PM