none
Cannot find information about the local domain.

    Question



  • this is from my edge after 10 min from the edge installation

     


    Ahmad Samir | MCSE 2003 | MCTS: Exchange 2010, MCTS: Lync 2010.
    Monday, January 2, 2012 9:21 PM

Answers

  • So you are trying to launch the Lync management shell from the Edge server?  If so, this is your problem.  All configuration and management of the Edge is performed on the internal Lync servers.  Those changes are replicated to the Edge server.  There is no reason to "manage" the edge server FROM the edge server.
    Tim Harrington | MVP: Exchange | MCITP: EMA 2007/2010, MCITP: Lync 2010, MCITP: Server 2008, MCTS: OCS | Blog: http://HowDoUC.blogspot.com | Twitter: @twharrington
    • Proposed as answer by Hany Taha Tuesday, January 3, 2012 8:33 AM
    • Marked as answer by Medo Bond Tuesday, January 3, 2012 10:19 AM
    Monday, January 2, 2012 10:14 PM
  • This is not a problem.  Since the Edge is not joined to domain, it cannot connect.  You only need to manage Edge from the internal servers.  The config will replicate out to the Edge server over port 4443 (so make sure that port is open from the front-ends to the Edge).  You can check replication status from the Lync Control Panel, Topology tab (or by using the Get-CsManagementStoreReplicationStatus command from internal server).  There should be a green check mark next to the Edge server.


    Tim Harrington | MVP: Exchange | MCITP: EMA 2007/2010, MCITP: Lync 2010, MCITP: Server 2008, MCTS: OCS | Blog: http://HowDoUC.blogspot.com | Twitter: @twharrington
    • Marked as answer by Medo Bond Tuesday, January 3, 2012 10:19 AM
    Monday, January 2, 2012 11:20 PM

All replies

  • So you are trying to launch the Lync management shell from the Edge server?  If so, this is your problem.  All configuration and management of the Edge is performed on the internal Lync servers.  Those changes are replicated to the Edge server.  There is no reason to "manage" the edge server FROM the edge server.
    Tim Harrington | MVP: Exchange | MCITP: EMA 2007/2010, MCITP: Lync 2010, MCITP: Server 2008, MCTS: OCS | Blog: http://HowDoUC.blogspot.com | Twitter: @twharrington
    • Proposed as answer by Hany Taha Tuesday, January 3, 2012 8:33 AM
    • Marked as answer by Medo Bond Tuesday, January 3, 2012 10:19 AM
    Monday, January 2, 2012 10:14 PM
  • Dear TWHarrington, so this not a problem ?  and the edge will replicate from the RTC normally


    Ahmad Samir | MCSE 2003 | MCTS: Exchange 2010, MCTS: Lync 2010.
    Monday, January 2, 2012 10:30 PM
  • This is not a problem.  Since the Edge is not joined to domain, it cannot connect.  You only need to manage Edge from the internal servers.  The config will replicate out to the Edge server over port 4443 (so make sure that port is open from the front-ends to the Edge).  You can check replication status from the Lync Control Panel, Topology tab (or by using the Get-CsManagementStoreReplicationStatus command from internal server).  There should be a green check mark next to the Edge server.


    Tim Harrington | MVP: Exchange | MCITP: EMA 2007/2010, MCITP: Lync 2010, MCITP: Server 2008, MCTS: OCS | Blog: http://HowDoUC.blogspot.com | Twitter: @twharrington
    • Marked as answer by Medo Bond Tuesday, January 3, 2012 10:19 AM
    Monday, January 2, 2012 11:20 PM
  • but even the Get-CsManagementStoreReplicationStatus won't work?


    me

    Thursday, March 1, 2012 9:54 PM
  • Dear eyesoft2222,

    Sorry, it was a lab and i remove it,


    Ahmad Samir | MCSE 2003 | MCTS: Exchange 2010, MCTS: Lync 2010.

    Monday, March 5, 2012 12:36 PM
  • ports are open from FE to edge, but still recevie error
    Tuesday, February 3, 2015 8:11 AM