none
skype for business with office 365 RRS feed

  • Question

  • Hello

    I have sfb frnt end, edge and reverse proxy working fine for pc users from AD, I have an office 365 account with domain si.com now i want all users of this domain of office 365 to use my sfb, how do i make all si.com users to use the sfb setup of abc.com?

    I did try to go to admin centre of si.com and add domain, it is asking to add few dns records in ABC.com but when i add it says same record exists...for eg sip record point to edge and stuff...nw if i change those sip records to sipdir.online.lync.com then will my existing AD users be affected, as it is live enivronment...i don knw what to do as i dont want to ceate errors....also m not very familiar with all this....how do i now so i dont mess up with DNS

    Monday, April 10, 2017 9:44 AM

Answers

  • Hi Lexi,

    Based on your description, I understand that you want SFB online user could use SFB on premise service.

    For this situation, you could configure SFB hybrid, hybrid connectivity between Skype for Business Server and Skype for Business Online means users of a domain, such as contoso.com, are split between using Skype for Business Server on premises and Skype for Business Online. Some of the domain users are homed on premises, and some users are homed online.

    The following blog describes how to do hybrid, please refer to
    https://blogs.technet.microsoft.com/canitpro/2015/12/23/step-by-step-skype-for-business-2015-hybrid-configuration/

    Moreover, after the hybrid, you could migrate users in SFB online to SFB on premise, then SFB online accounts could use SFB server.
    https://technet.microsoft.com/en-us/library/dn689115.aspx


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Tuesday, April 11, 2017 5:07 AM
    Moderator
  • You would need to set up hybrid between on prem SFB server and SFB online

    in that way:-

    1. There would be a trust created(THe on prem user wil be able to see presence/chat with online user and viceversa)

    2. You can move SFB on prem users to SFB online(ON boarding and off boarding)

    3. The on prem SFB user wil use existing PBX and cloud users will use Microsoft office 365 cloud PBX

    Alice has already shared an article to configure the hybrid set up


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Tuesday, April 11, 2017 9:12 AM
  • Hi Lexi,

    You don't have to add abc.com in O365 admin center, you need to set up hybrid environment according to the link above.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Tuesday, April 11, 2017 9:45 AM
    Moderator
  • Hi Lexi,

    Yes, after you configure the hybrid for your environment, ABC.com users can access both Pc and mobile accounts and also si.com users cab access sfb on pc and mobile

    This blog is for your reference
    https://support.office.com/en-us/article/Set-up-Skype-for-Business-Online-for-mobile-devices-1aa7bda5-654f-4002-ab4a-689077b2374b

    Hope all these information is helpful to you.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:02 AM
    Moderator
  • during hybrid set up make sure all the dns records for SFB are pointing to ON prem

    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:07 AM
  • Hello

    1. I have sfb frnt end, edge and reverse proxy working fine for pc users from AD, I have an office 365 account with domain si.com now i want all users of this domain of office 365 to use my sfb, how do i make all si.com users to use the sfb setup of abc.com?

    Answer to ist question:-

    abc.com is a separate/individual  SFB sip domain whose services are registered on ON-prem set up. The SI.com is a separate/individual  SFB sip domain which is a hosted SFB platform i.e. O365.

    THe si.com wil have SFB online and can make use of Lync presence/IM/Audio video calls/Meeting sharing etc.

    THe only way you can make si.com sip domain talk with abc.dom domain is by setting up hybrid set up between the two domains

    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>



    2. ANswer to second question

    Right because SI.COM SIP domains DNS records are pointing to O365 and abc.com sip domains DNS records are pointing towards ON prem set up

    Do not change the dns records for abc.com as it wil break your existing set up

    When you configure the hybrid set up between abc.com and si.com sip domains, the si.com sip domain wil be added as an additional sip domains in your on-prem sfb server and all the users associated with si.com has to be present in abc.com AD as disabled accounts (If different AD forest) and if same forest then the users of si.com wil already be present in your abc.com AD as a child domain or forest


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer


    • Edited by Akabe Wednesday, April 12, 2017 9:34 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:33 AM
  • Hi Lexi,

    Yes, as Akabe said, please don't change the DNS records for abc.com, just follow the hybrid configuration, then you can achieve your goal.

    If you have any other issue during the hybrid process, welcome to open a post in our forum.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:40 AM
    Moderator
  • Lexi,

    there are alot of pre-checks to be done before setting up hybrid set up

    - https://technet.microsoft.com/en-us/library/jj205403.aspx

    First plan it and then execute it

    Also what is the current set up of your AD forest

    Is si.com a different forest or added as a sub domain inside abc.com


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer


    • Edited by Akabe Wednesday, April 12, 2017 10:02 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:59 AM
  • Also what is the current set up of your AD forest

    Is si.com a different forest or added as a sub domain inside abc.com

    Else, if you just want

    ABC users to IM/Check presence of si.com, then simply add si.com as a trusted sip domain (I.e. SEt up federation) in existing abc SFB server

    - https://technet.microsoft.com/en-us/library/jj205126.aspx


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 10:05 AM
  • Hello Well actually the set up is like this

    I have this ABC.com which has DC, SFB front end ,Edge server and Reverse Proxy, it has external user working perfecting fine on laptops.the users are signing in as user1@abc.com....everything is working fine.

    Now my company ha got another domain name called si.com and this has got no skype for business setup r anything...it has office 365 Admin centre and few users with emails user2@si.com

    These both are not linked to each other by dns r anything, I tried to add ABC.com domain in si.com office 365 admin centre but it was asking me to replace dns records like sip, autodiscover,etc I didnot do that as I didnot wanted to mess up with current set up.

    Now since the suggestion was to set up hybrid without adding domain I started to do that...hence above errors...si.com is not added as sub domain or nything in ABC.com...ABC.com and si.com are two different domains...where si.com has just got office 365 admin centre thats all.

    Please ask me if u want any other info

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 12:21 PM
  • Well in your case it would not be easy to set up hybrid since abc.com and si.com are two different AD domains

    I assume si.com was directly directly added in office 365 as accepted domain and the users associated with it were provisioned on cloud

    In hybrid you would have to create disabled users (si.com) under ABC.com AD and then  set up hybrid for SFB

    Since abc.com has its own SFB on prem and si.com has its own SFB Online, so you can set up federation between abc.com and si.com (This will help both the domains to check presence info/IM/Audio/video chat


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer



    • Edited by Akabe Thursday, April 13, 2017 7:18 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Thursday, April 13, 2017 7:17 AM
  • The best method to follow in your case is to set up federation between SFB on prem and SFB online 

    Hybrid is a bit lengthy procedure and it will get complicated. It requires on prem AD user to first sync with O365 using Dirsync/AAdconnect tool

    So follow bellow article to set up federation between SFB on prem and online. This way your abc.com users can atleast see SI.com users presence/do IM chat/Audio/video chat and so on

    -  - https://technet.microsoft.com/en-us/library/jj205126.aspx



    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Proposed as answer by Akabe Monday, April 17, 2017 8:38 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Thursday, April 13, 2017 2:41 PM
  • Hi Lexi,

    You could also refer to the following video Tutorials to configure hybrid environment for Skype for business
    https://channel9.msdn.com/Events/Ignite/2015/BRK4129

    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Friday, April 14, 2017 8:04 AM
    Moderator
  • it is the edge server that helps to set up federation between on prem and 0365

    You would need to create the hosting provider and allow discovery based on external DNS (That is already published)

    The above article is meant to establish the federation. Just follow the instructions and it should work 

    @O365 end, you wont have to do much as it would be an open federation by default 


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer


    • Edited by Akabe Tuesday, April 18, 2017 3:51 PM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:23 AM
    Tuesday, April 18, 2017 3:51 PM
  • Hi Lexi,

    Please run the commands in the following article to set up federation

    https://technet.microsoft.com/en-us/library/jj205126.aspx


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:23 AM
    Wednesday, April 19, 2017 2:58 AM
    Moderator

All replies

  • Hi Lexi,

    Based on your description, I understand that you want SFB online user could use SFB on premise service.

    For this situation, you could configure SFB hybrid, hybrid connectivity between Skype for Business Server and Skype for Business Online means users of a domain, such as contoso.com, are split between using Skype for Business Server on premises and Skype for Business Online. Some of the domain users are homed on premises, and some users are homed online.

    The following blog describes how to do hybrid, please refer to
    https://blogs.technet.microsoft.com/canitpro/2015/12/23/step-by-step-skype-for-business-2015-hybrid-configuration/

    Moreover, after the hybrid, you could migrate users in SFB online to SFB on premise, then SFB online accounts could use SFB server.
    https://technet.microsoft.com/en-us/library/dn689115.aspx


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Tuesday, April 11, 2017 5:07 AM
    Moderator
  • thanks yes SFB on premises is working perfectly fine, but i want users to login with both online and on premise service..though office 365 hasnt got this domain added.....Is it like sfb users can ether login via sfb premises ot online or can they login both ways?
    Tuesday, April 11, 2017 7:59 AM
  • Do i need to add domain into office365 if i want my ffice 365 users to use my sfb on premises ?
    Tuesday, April 11, 2017 8:54 AM
  • You would need to set up hybrid between on prem SFB server and SFB online

    in that way:-

    1. There would be a trust created(THe on prem user wil be able to see presence/chat with online user and viceversa)

    2. You can move SFB on prem users to SFB online(ON boarding and off boarding)

    3. The on prem SFB user wil use existing PBX and cloud users will use Microsoft office 365 cloud PBX

    Alice has already shared an article to configure the hybrid set up


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Tuesday, April 11, 2017 9:12 AM
  • Hi Lexi,

    You don't have to add abc.com in O365 admin center, you need to set up hybrid environment according to the link above.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Tuesday, April 11, 2017 9:45 AM
    Moderator
  • Ok so u mean if i just set ths up my ABC.com users can access both Pc and mobile accounts and also si.com users cab access sfb on pc and mobile?
    Wednesday, April 12, 2017 8:28 AM
  • Hi Lexi,

    Yes, after you configure the hybrid for your environment, ABC.com users can access both Pc and mobile accounts and also si.com users cab access sfb on pc and mobile

    This blog is for your reference
    https://support.office.com/en-us/article/Set-up-Skype-for-Business-Online-for-mobile-devices-1aa7bda5-654f-4002-ab4a-689077b2374b

    Hope all these information is helpful to you.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:02 AM
    Moderator
  • during hybrid set up make sure all the dns records for SFB are pointing to ON prem

    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:07 AM
  • 

    I am getting this error when trying to login t office 365

    my sfb control panel is from abc.com and office 365 account is administrator@si.com

    Wednesday, April 12, 2017 9:17 AM
  • Hello

    1. I have sfb frnt end, edge and reverse proxy working fine for pc users from AD, I have an office 365 account with domain si.com now i want all users of this domain of office 365 to use my sfb, how do i make all si.com users to use the sfb setup of abc.com?

    Answer to ist question:-

    abc.com is a separate/individual  SFB sip domain whose services are registered on ON-prem set up. The SI.com is a separate/individual  SFB sip domain which is a hosted SFB platform i.e. O365.

    THe si.com wil have SFB online and can make use of Lync presence/IM/Audio video calls/Meeting sharing etc.

    THe only way you can make si.com sip domain talk with abc.dom domain is by setting up hybrid set up between the two domains

    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>



    2. ANswer to second question

    Right because SI.COM SIP domains DNS records are pointing to O365 and abc.com sip domains DNS records are pointing towards ON prem set up

    Do not change the dns records for abc.com as it wil break your existing set up

    When you configure the hybrid set up between abc.com and si.com sip domains, the si.com sip domain wil be added as an additional sip domains in your on-prem sfb server and all the users associated with si.com has to be present in abc.com AD as disabled accounts (If different AD forest) and if same forest then the users of si.com wil already be present in your abc.com AD as a child domain or forest


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer


    • Edited by Akabe Wednesday, April 12, 2017 9:34 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:33 AM
  • Hi Lexi,

    Yes, as Akabe said, please don't change the DNS records for abc.com, just follow the hybrid configuration, then you can achieve your goal.

    If you have any other issue during the hybrid process, welcome to open a post in our forum.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:40 AM
    Moderator
  • How about the error i got above whle setting up hybrid

    i tried to google and checked this command

    Get-Service "msoidsvc"

    but it gives me this error

    I also looked for

    %windir%\System32\config\systemprofile\AppData\Local but could see only system and administrator...not NETWORKService

    Wednesday, April 12, 2017 9:42 AM
  • Lexi,

    there are alot of pre-checks to be done before setting up hybrid set up

    - https://technet.microsoft.com/en-us/library/jj205403.aspx

    First plan it and then execute it

    Also what is the current set up of your AD forest

    Is si.com a different forest or added as a sub domain inside abc.com


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer


    • Edited by Akabe Wednesday, April 12, 2017 10:02 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 9:59 AM
  • Also what is the current set up of your AD forest

    Is si.com a different forest or added as a sub domain inside abc.com

    Else, if you just want

    ABC users to IM/Check presence of si.com, then simply add si.com as a trusted sip domain (I.e. SEt up federation) in existing abc SFB server

    - https://technet.microsoft.com/en-us/library/jj205126.aspx


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 10:05 AM
  • Hello Well actually the set up is like this

    I have this ABC.com which has DC, SFB front end ,Edge server and Reverse Proxy, it has external user working perfecting fine on laptops.the users are signing in as user1@abc.com....everything is working fine.

    Now my company ha got another domain name called si.com and this has got no skype for business setup r anything...it has office 365 Admin centre and few users with emails user2@si.com

    These both are not linked to each other by dns r anything, I tried to add ABC.com domain in si.com office 365 admin centre but it was asking me to replace dns records like sip, autodiscover,etc I didnot do that as I didnot wanted to mess up with current set up.

    Now since the suggestion was to set up hybrid without adding domain I started to do that...hence above errors...si.com is not added as sub domain or nything in ABC.com...ABC.com and si.com are two different domains...where si.com has just got office 365 admin centre thats all.

    Please ask me if u want any other info

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Wednesday, April 12, 2017 12:21 PM
  • Well in your case it would not be easy to set up hybrid since abc.com and si.com are two different AD domains

    I assume si.com was directly directly added in office 365 as accepted domain and the users associated with it were provisioned on cloud

    In hybrid you would have to create disabled users (si.com) under ABC.com AD and then  set up hybrid for SFB

    Since abc.com has its own SFB on prem and si.com has its own SFB Online, so you can set up federation between abc.com and si.com (This will help both the domains to check presence info/IM/Audio/video chat


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer



    • Edited by Akabe Thursday, April 13, 2017 7:18 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Thursday, April 13, 2017 7:17 AM
  • ok thanks but how do i do that? firstly how to I create disabled users? and how do i set up federation?any links or tutorials...i can send u the pics of set up so that u can understand abit more and guide me..do u have an email address
    Thursday, April 13, 2017 10:48 AM
  • The best method to follow in your case is to set up federation between SFB on prem and SFB online 

    Hybrid is a bit lengthy procedure and it will get complicated. It requires on prem AD user to first sync with O365 using Dirsync/AAdconnect tool

    So follow bellow article to set up federation between SFB on prem and online. This way your abc.com users can atleast see SI.com users presence/do IM chat/Audio/video chat and so on

    -  - https://technet.microsoft.com/en-us/library/jj205126.aspx



    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    • Proposed as answer by Akabe Monday, April 17, 2017 8:38 AM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:22 AM
    Thursday, April 13, 2017 2:41 PM
  • Hi Lexi,

    You could also refer to the following video Tutorials to configure hybrid environment for Skype for business
    https://channel9.msdn.com/Events/Ignite/2015/BRK4129

    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Friday, April 14, 2017 8:04 AM
    Moderator
  • Hi Lexi,

    Would you please provide us with an update on the status of your issue?

    If my reply is helpful to you, please mark it as an answer because it will help others who has the similar issue.


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Monday, April 17, 2017 7:40 AM
    Moderator
  • The best method to follow in your case is to set up federation between SFB on prem and SFB online 

    Hybrid is a bit lengthy procedure and it will get complicated. It requires on prem AD user to first sync with O365 using Dirsync/AAdconnect tool

    So follow bellow article to set up federation between SFB on prem and online. This way your abc.com users can atleast see SI.com users presence/do IM chat/Audio/video chat and so on

    -  - https://technet.microsoft.com/en-us/library/jj205126.aspx



    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer

    an u plz tel me how to do federation...this ink just shows few powershell commands thts all....
    Tuesday, April 18, 2017 11:45 AM
  • it is the edge server that helps to set up federation between on prem and 0365

    You would need to create the hosting provider and allow discovery based on external DNS (That is already published)

    The above article is meant to establish the federation. Just follow the instructions and it should work 

    @O365 end, you wont have to do much as it would be an open federation by default 


    MCSA Office 365 | MCSA Exchange server 2010 | Red Hat Certified Engineer


    • Edited by Akabe Tuesday, April 18, 2017 3:51 PM
    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:23 AM
    Tuesday, April 18, 2017 3:51 PM
  • Hi Lexi,

    Please run the commands in the following article to set up federation

    https://technet.microsoft.com/en-us/library/jj205126.aspx


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    • Marked as answer by Lexi Mace Wednesday, April 19, 2017 8:23 AM
    Wednesday, April 19, 2017 2:58 AM
    Moderator
  • Ok..do I run these commands in edge server management shell or frontend server management shell?
    Wednesday, April 19, 2017 7:18 AM
  • Hi Lexi,

    Run these command in SFB FE server


    Regards,

    Alice Wang


    Please remember to mark the replies as an answers if they help and unmark them if they provide no help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Wednesday, April 19, 2017 7:25 AM
    Moderator
  • Got it...thanks

    • Edited by Lexi Mace Wednesday, April 19, 2017 8:23 AM
    Wednesday, April 19, 2017 7:47 AM