Answered by:
server 2012 WDS - TFTP pxe-m0f exiting intel pxe rom. operating system not found
Question
-
created a new WDS server on server 2012 pretty sure i have done it right
and im receiving :
pxe-m0f exiting intel pxe rom. operating system not found
FW is off
DHCP is not on the same server, therefore no extra ordinary setup..
Both Servers are on Vmware
Have tested with a Standalone machine, same resultUpdate:
While waiting for the "Contacting server" to time out. if i then, add a new "boot image" "during" i get a momentary "hole" sending me to the boot menu now that is strange!!!!
have tried all settings
i got this working on a server 2008 r2 with no problems.
what im i missing
"Carpe Diem" does not mean "fish of the day."
- Edited by Emort Friday, June 14, 2013 2:01 PM more info
Answers
-
Hi,
I found a similar issue in following thread. Please see if the troubleshooting process helps:
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/bd289a58-fa25-4d02-a531-e6e6762428b0/As the first reply said, Check the PXE Service Point and make sure that the extracted boot binaries from the boot image are resident (for either x86 or x64 boot images or both).
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact tnmff@microsoft.com.
- Marked as answer by MedicalSMicrosoft contingent staff, Moderator Sunday, June 23, 2013 6:29 AM
All replies
-
Hi,
I found a similar issue in following thread. Please see if the troubleshooting process helps:
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/bd289a58-fa25-4d02-a531-e6e6762428b0/As the first reply said, Check the PXE Service Point and make sure that the extracted boot binaries from the boot image are resident (for either x86 or x64 boot images or both).
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact tnmff@microsoft.com.
- Marked as answer by MedicalSMicrosoft contingent staff, Moderator Sunday, June 23, 2013 6:29 AM
-
-
I have just tested the following:
1 MDT2013-server --> Using this litetouch.wim for all servers
1 Server2008R2 --> No problem with PXE-boot
1 Server2012--> Specified error from the beginning of this thread
1 Server2012R2 --> Specified error from the beginning of this thread
So, the problem is with server 2012 and server2012R2 pxe boot. The only difference in the Interface is the Tab "TFTP". But i didn`t find a solution. Anybody who can test this out?
Thx
-
-
On the windows server2012R2 i have enabled ALL windows deployment services-logs (including verbose and admin).
I can see a lot of traffic between cliënt and host, but i don`t see errors or maybe the problem.
Only this error :
[WDSServer] [base\eco\wds\wdsmgmt\src\wdsdirectoryservicesusepolicy.cpp:306] Expression: , Win32 Error=0x2
Anybody with an option with this kind of logging?
Thx