none
Erro DCOM 10016 SBS 2008 RRS feed

  • Pergunta

  • bom dia pessoal, estou com erro no log, não consigo resolver, por favor me ajudem, segue o erro abaixo.

     

    Nome do Log:   System
    Fonte:         Microsoft-Windows-DistributedCOM
    Data:          17/12/2010 09:35:43
    Identificação do Evento:10016
    Categoria da Tarefa:Nenhum
    Nível:         Erro
    Palavras-chave:Clássico
    Usuário:       SERVIÇO DE REDE
    Computador:    SRV.ominfo.local
    Descrição:
    As configurações de permissão Específico do aplicativo não concedem permissão Local Ativação para o aplicativo de servidor COM com CLSID
    {629DA12E-9AD5-4FEC-B886-42C5982C5109}
     ao usuário AUTORIDADE NT\SERVIÇO DE REDE SID (S-1-5-20) do endereço LocalHost (Usando LRPC). Essa permissão de segurança pode ser modificada com a ferramenta administrativa Serviços de Componentes.
    XML de Evento:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="49152">10016</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-17T11:35:43.000Z" />
        <EventRecordID>45178</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>System</Channel>
        <Computer>SRV.ominfo.local</Computer>
        <Security UserID="S-1-5-20" />
      </System>
      <EventData>
        <Data Name="param1">Específico do aplicativo</Data>
        <Data Name="param2">Local</Data>
        <Data Name="param3">Ativação</Data>
        <Data Name="param4">{629DA12E-9AD5-4FEC-B886-42C5982C5109}</Data>
        <Data Name="param5">AUTORIDADE NT</Data>
        <Data Name="param6">SERVIÇO DE REDE</Data>
        <Data Name="param7">S-1-5-20</Data>
        <Data Name="param8">LocalHost (Usando LRPC)</Data>
      </EventData>
    </Event>

    sexta-feira, 17 de dezembro de 2010 11:46

Respostas

  • Veja esse procedimento:

    Grant the user permissions to start the COM component

    Grant the user permissions to start the COM component. To do this, follow these steps:
    1. Click Start, click Run, type regedit in the Open box, and then click OK.
    2. Locate and then click the following registry subkey:
      HKEY_CLASSES_ROOT\CLSID\CLSID value
      Note In this subkey, "CLSID value" is a placeholder for the CLSID information that appears in the message.
    3. In the right pane, double-click AppID.

      The Edit String dialog box appears. Leave this dialog box open and continue to the next step.
    4. Click Start, click Run, type dcomcnfg in the Open box, and then click OK.

      If a Windows Security Alert message prompts you to keep blocking the Microsoft Management Console program, click to unblock the program.
    5. In Component Services, double-click Component Services, double-click Computers, double-click My Computer, and then click DCOM Config.
    6. In the details pane, locate the program by using the friendly name.

      If the AppGUID identifier is listed instead of the friendly name, locate the program by using this identifier.
    7. Right-click the program, and then click Properties.
    8. Click the Security tab.
    9. In the Launch and Activation Permissions area, click Customize, and then click Edit.
    10. Click Add, type the user's account name, and then click OK.
    11. While the user is selected, click to select the Allow check boxes for the following items:
      • Local Launch
      • Remote Launch
      • Local Activation
      • Remote Activation
    12. Click OK two times.
    13. Quit Registry Editor.

    Grant the correct permissions to the Network Service account

    To grant the correct permissions to the Network Service account, follow these steps:
    1. Click Start, click Run, type dcomcnfg in the Open box, and then click OK.
    2. In Component Services, double-click Component Services, and then double-click Computers.
    3. Right-click My Computer, and then click Properties.
    4. Click the COM Security tab.
    5. In the Launch and Activation Permissions area, click Edit Default.
    6. Click Add, type Network Service, and then click OK.
    7. While Network Service is selected, click to select the Allow check boxes for the following items:
      • Local Launch
      • Remote Launch
      • Local Activation
      • Remote Activation
      Click OK two times.

    MVP - Daniel Santos Blog: www.engdanielsantos.wordpress.com Twitter: @danielsantos_ti
    sexta-feira, 17 de dezembro de 2010 17:38
    Moderador

Todas as Respostas

  • Veja esse procedimento:

    Grant the user permissions to start the COM component

    Grant the user permissions to start the COM component. To do this, follow these steps:
    1. Click Start, click Run, type regedit in the Open box, and then click OK.
    2. Locate and then click the following registry subkey:
      HKEY_CLASSES_ROOT\CLSID\CLSID value
      Note In this subkey, "CLSID value" is a placeholder for the CLSID information that appears in the message.
    3. In the right pane, double-click AppID.

      The Edit String dialog box appears. Leave this dialog box open and continue to the next step.
    4. Click Start, click Run, type dcomcnfg in the Open box, and then click OK.

      If a Windows Security Alert message prompts you to keep blocking the Microsoft Management Console program, click to unblock the program.
    5. In Component Services, double-click Component Services, double-click Computers, double-click My Computer, and then click DCOM Config.
    6. In the details pane, locate the program by using the friendly name.

      If the AppGUID identifier is listed instead of the friendly name, locate the program by using this identifier.
    7. Right-click the program, and then click Properties.
    8. Click the Security tab.
    9. In the Launch and Activation Permissions area, click Customize, and then click Edit.
    10. Click Add, type the user's account name, and then click OK.
    11. While the user is selected, click to select the Allow check boxes for the following items:
      • Local Launch
      • Remote Launch
      • Local Activation
      • Remote Activation
    12. Click OK two times.
    13. Quit Registry Editor.

    Grant the correct permissions to the Network Service account

    To grant the correct permissions to the Network Service account, follow these steps:
    1. Click Start, click Run, type dcomcnfg in the Open box, and then click OK.
    2. In Component Services, double-click Component Services, and then double-click Computers.
    3. Right-click My Computer, and then click Properties.
    4. Click the COM Security tab.
    5. In the Launch and Activation Permissions area, click Edit Default.
    6. Click Add, type Network Service, and then click OK.
    7. While Network Service is selected, click to select the Allow check boxes for the following items:
      • Local Launch
      • Remote Launch
      • Local Activation
      • Remote Activation
      Click OK two times.

    MVP - Daniel Santos Blog: www.engdanielsantos.wordpress.com Twitter: @danielsantos_ti
    sexta-feira, 17 de dezembro de 2010 17:38
    Moderador
  • Bom dia , estou com o mesmo problema esse procedimento resolveu o seu problema , no meu caso a gui de segurança esta desabilitada e não consigo alterar as opções citadas , é necessario entrar em modo de segurança ou alterar outro parametro ?

     

    Obrigado 

    quinta-feira, 14 de abril de 2011 13:53