locked
SCOM Dashboards in sharepoint appear in blank RRS feed

  • Question

  • Hi friends,
    I have a problem when i try to display dashboard through SharePoint with SCOM 2012.
    I install the connector and copy the URL of the dashboard in the web part.
    I Assigned the necessary permissions to the user that I login to sharepoint and SCOM (administrator permissions).
    the SCOM web console is installed in a different computer sharepoint within the same LAN.
    With all this, I can not see the dashboard published in sharepoint. I receipt the following image.

    Someone who can help me =S



    • Edited by Ghio123 Thursday, September 20, 2012 8:15 PM
    Thursday, September 20, 2012 8:11 PM

Answers

  • Hi,

    Thanks for the suggestions, You are right, I'm trying to display the SCOM dashboard on the Service Manager Self Service Portal.

    I tried it on other sites and the error remains, maybe it could be a problem of certificates or configuration of protocols http/https.


    I had the same issue. I created a new site collection and displayed the SCOM dashboard in the new site and it worked. I believe there is an issue displaying on the SSP because of SSL. Try that and see if it works for you.

    My Blog | www.buchatech.com | www.systemcenterportal.com
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

    • Proposed as answer by GHILLO FIORI Friday, September 28, 2012 9:31 PM
    • Marked as answer by Nicholas Li Friday, October 5, 2012 7:21 AM
    Thursday, September 27, 2012 2:08 PM
  • Hi,

    I would like to suggest you check the configurations or try again referring to the following articles:

    Using SharePoint to View Operations Manager Data

    http://technet.microsoft.com/en-us/library/hh212924.aspx

    Fun With SCOM 2012 Dashboards…SharePoint & Visio Included…

    http://blogs.technet.com/b/klince/archive/2012/05/05/fun-with-scom-2012-dashboards-sharepoint-amp-visio-included.aspx

    Hope this helps.

    Thanks.

    Nicholas Li

    TechNet Community Support

    • Marked as answer by Nicholas Li Friday, October 5, 2012 7:21 AM
    Tuesday, September 25, 2012 6:27 AM

All replies

  • Hi,

    I would like to suggest you check the configurations or try again referring to the following articles:

    Using SharePoint to View Operations Manager Data

    http://technet.microsoft.com/en-us/library/hh212924.aspx

    Fun With SCOM 2012 Dashboards…SharePoint & Visio Included…

    http://blogs.technet.com/b/klince/archive/2012/05/05/fun-with-scom-2012-dashboards-sharepoint-amp-visio-included.aspx

    Hope this helps.

    Thanks.

    Nicholas Li

    TechNet Community Support

    • Marked as answer by Nicholas Li Friday, October 5, 2012 7:21 AM
    Tuesday, September 25, 2012 6:27 AM
  • Hi friends,
    I have a problem when i try to display dashboard through SharePoint with SCOM 2012.
    I install the connector and copy the URL of the dashboard in the web part.
    I Assigned the necessary permissions to the user that I login to sharepoint and SCOM (administrator permissions).
    the SCOM web console is installed in a different computer sharepoint within the same LAN.
    With all this, I can not see the dashboard published in sharepoint. I receipt the following image.

    Someone who can help me =S



    Hi,

    I noticed SMPortal from your screenshot. Are you trying to display the SCOM Dashboard on the Service Manager Self Service Portal?


    My Blog | www.buchatech.com | www.systemcenterportal.com
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

    Thursday, September 27, 2012 4:56 AM
  • Hi,

    Thanks for the suggestions, You are right, I'm trying to display the SCOM dashboard on the Service Manager Self Service Portal.

    I tried it on other sites and the error remains, maybe it could be a problem of certificates or configuration of protocols http/https.

    Thursday, September 27, 2012 2:02 PM
  • Hi,

    Thanks for the suggestions, You are right, I'm trying to display the SCOM dashboard on the Service Manager Self Service Portal.

    I tried it on other sites and the error remains, maybe it could be a problem of certificates or configuration of protocols http/https.


    I had the same issue. I created a new site collection and displayed the SCOM dashboard in the new site and it worked. I believe there is an issue displaying on the SSP because of SSL. Try that and see if it works for you.

    My Blog | www.buchatech.com | www.systemcenterportal.com
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

    • Proposed as answer by GHILLO FIORI Friday, September 28, 2012 9:31 PM
    • Marked as answer by Nicholas Li Friday, October 5, 2012 7:21 AM
    Thursday, September 27, 2012 2:08 PM
  • Thank you so much,
    IT was a good answer, I will continue deploying on a different site .

    Friday, September 28, 2012 9:30 PM
  • Hi All,

    I'm having the same problem, but perhaps I can explain our environment.

    We have 2 x sharepoint farms. one for testing and our production.

    Our Test environment is working 100%.

    However, our production environment just displays a "blank" webpart, the same as the screenshot above.

    We also had to do extra configs on the production environment which we didnt need to do on dev, which is strange. We had to give our App Pool account dbowner on the database to get it to read the OpsMgr Central Admin list. We didnt need to do this on Test servers, and they are all using the same App Pool Accounts.

    The only difference i can think of is that our Test environment uses HTTP, but our Production environment uses HTTPS

    Our SCOM Web Portal is HTTP (the release notes say it should be like this - it doesnt say if Sharepoint is HTTPS that the SCOM site must match?).

    Any thoughts?


    • Edited by Carl.T Tuesday, December 4, 2012 12:23 PM
    Tuesday, December 4, 2012 12:21 PM
  • Fortunately, I was able to browse my Sharepoint 2010 site without HTTPS

    It works when opening Sharepoint in HTTP, and fails over HTTPS

    I'm going to try and setup Operations Web Console using HTTPS and hopefully it will work.

    A real pain - the documentation clearly says the OpgMgr console must be HTTP for Sharepoint Dashboards to work - but this doesnt seem to be the case when Sharepoint uses HTTPS (as most corporate public-facing intranet sites would use)

    Hope it works, will update. Any thoughts welcome in the meantime.

    Tuesday, December 4, 2012 2:18 PM
  • Success - as per the release notes, your SCOM Web Console must be HTTP in order to integrate with Sharepoint Webparts

    However, this is not the case if your SharePoint environment uses HTTPS, in which case you need to implement HTTPS on your SCOM Webconsole as well. If you do not, you are able to implement the webparts successfully, but the web part will just be blank or empty.

    You also need to follow the instructions on using shared credentials in Sharepoint, especially since you are using HTTPS.

    We used an internal CA to issue the certificate for SCOM Webconsole, which allows all domain-connected PCs & Laptops to trust the Certificate & Chains.

    • Proposed as answer by BuchatechMVP Thursday, December 6, 2012 1:35 PM
    Thursday, December 6, 2012 7:34 AM
  • Hi Carl or Anybody,

    I have configured everything according to this blog.

    http://blogs.technet.com/b/kevinholman/archive/2013/04/03/publishing-scom-2012-dashboards-to-sharepoint.aspx

    I also get the blank page on the web part.    Our SCOM Console is configured as https while our sharepoint site is configured as http.

    Are we able to make the operations manager web part work in this scenario?   What do you recommend.

    Thanks

    Monday, April 22, 2013 8:54 PM
  • We went ahead and created a sub site to a sharepoint site we had using https and everything worked.
    Monday, April 22, 2013 11:32 PM
  • i can confirm that in sp 2013

    only

    https + https

    or

    http + http

    ( webconsole + sp)

    working 

    Thursday, November 27, 2014 2:53 PM
  • Thanks for info

    Regards,

    Enis

    Saturday, November 29, 2014 10:34 PM