locked
Vista "Server execution failed" tray message: caused by AOL Instant Messenger. RRS feed

  • Question

  • I have recieved Windows Vista Business edition as part of my college's MSDNAA program. I am having a problem which pops up every now and again, though I think I am beginning to narrow down its causes.

    At some point the network icon will go off - it will display me as disconnected. Holding my mouse over it the popup says "connection status: unknown server execution failed". At the same time with that, my windows experience index will stop appearing in windows' system properties window, the network center freezes, my ATI driver's control app refuses to start, and if I change my sound driver the sound icon goes dead aswell. Also, if I try to install windows by repairing my current installation it will freeze at 52%. The problem is only reversable via system restore.

    The network itself works fine, as does the sound. The problems seem completly unrelated and are actually pointing to something more complex than simply a network problem. However, I have noticed it happen under curious circumstances: after using yahoo messenger for a while it happens. After the issue is reversed via system restore if yahoo is started up again, explorer will freeze for a few seconds, then the problem will strike again. I have uninstalled yahoo and deleted its leftover program files, appdata files, programdata files, and registry entries. The problem was fixed. I blamed it on using a modified version called yahoo multi messenger because I needed to be online on 2 accounts at the same time. Back then I didn't know I could fix my problem with SR so I just reinstalled all of windows from scratch.

    Then a few days ago I installed trillian to use it as a substitute for yahoo. I had no problems at first. Then as I left 2 yahoo accounts run at once a few hours ago, it struck again. System restore repaired it again.

    I am currently interested in why this problem is occuring and what server execution failed is supposed to be because my network works just fine, but part of windows doesn't know that it is, and why it will mess up just so much of my system. If there are any ways to debug or troubleshoot this I am willing to go as deep into windows' infrastructure as it takes because it is a highly frustrating problem. Also, if you require any additional information about my hardware/software configuration I will gladly offer.

    Thank you in advance.
    Saturday, February 3, 2007 3:01 PM

Answers

  • In reply to you, I have taken y problem to tech support. I have AIM too, turns out the culprit was the latest version of AIM -- 5.9.6-something, do a system restore, uninstall it, install 5.9.3 or older, they'll work. My problem has been fixed.
    Sunday, February 4, 2007 11:11 PM

All replies

  • Yes, I'm having the same problem can someone please help. But, I think my problem may be from AIM instead of yahoo, but I'm not sure. I'm checking it out as I type.
    Sunday, February 4, 2007 11:02 PM
  • In reply to you, I have taken y problem to tech support. I have AIM too, turns out the culprit was the latest version of AIM -- 5.9.6-something, do a system restore, uninstall it, install 5.9.3 or older, they'll work. My problem has been fixed.
    Sunday, February 4, 2007 11:11 PM
  • I have the same issue with Vista Ultimate.

    I think MSN 8.1 screwed mine. When i view "network and sharing centre" the first line under the title reads

    "unknown - Server execution failed"

    Once that happens i am screwed and need to reboot the machine to get it working again.

    I have to admit Vista is RIDDLED with bugs througout and i have found a lot, plus its only 3 months old!

    In my event logs i receive this message

    "The Network List Service service terminated with the following error:
    Insufficient system resources exist to complete the requested service."

    I know for a fact that is wrong as i have over 1.2GB of memory and am about to upgrade to 2GB.

    Wait for SP1 as Vista really isn't ready!
    Monday, February 5, 2007 2:16 PM
  • I am having the same problem, I also have Vista Business Edition from MSDNAA, I don't wanna restore my OS.  
    Monday, February 5, 2007 7:16 PM
  • I am having the same exact problem. This is ridiculous, wonder how long this will take to get addressed.
    Monday, February 5, 2007 9:05 PM
  • Good! I am not alone!

    Here is what happened... One day, after restarting on feb 1st, after installing a round of microsoft updates it happened to me...

     

    I first noticed it as the network icon with a red 'X'... then i noticed i also couldn't MSTSC.exe into my vista computer that was having this issue... I assumed network, then as i progressed I noticed the system information tool (msinfo32.exe) couldn't "collect information" so that pointed me to the windows management information service - which is running just fine (as per the logs and service status).  I started to explore 'access' restrictions, disabling all the firewalls...etc.  I think it might just be the information service is blocked by programs that want to access it...  

    Oh,  restoring the system to an earlier date didn't fix the problem either.   Oh well...

     

    Can't wait to figure this one out.. i've tried everything!

    update...

    The Sidebar module that shows current network status works fine...  Leading more to believe there's an access issue between some windows apps and the information service... hmm!

     

    more possible problems...  I tried creating a new account on the machine (guest, standard user, and admin user)  and none of them would work after trying to login with the new account.  The desktop would take about a minute to come up and when it did, it would have a 'windows mail' loader error on MSOE.dll failed to initialize, and then explorer didn't start--- I couldn't even start explorer.exe from the ask manager!! (other simple apps started like notepad... but not the vitals!!)

     

     

    Tuesday, February 6, 2007 7:06 AM
  • A question for those complaining about the problem above:

    Does your network still work normally even though the network appears disconnected?

    There might actually be other programs not just AIM 5.9.6089 which cause this problem.

    But whatever the cause, using system restore to a time before the problem had occurred is most likely to solve the problem. However, starting the application which originally caused the problem will bring it back again.

    If you are interested in learning more about your problem, you may reproduce it to observe it better.

    I don't know about other programs, but the problem itself can be quite decieving. It doesn't necessarily occur at the very moment of connection. Mine happened only when 2 or more other messengers were working at once, and once it was triggered by the browser too.

    In all cases the interface(all, not just explorer), would freeze for a couple of seconds when the problem struck.

    I want to ask you all one question: when you open up system properties, does your rating(windows experience index) still appear normally? In my case it wouldn't display it.

    As for Vista bugs, the only real bugs I've found were explorer file names disappearing from a folder and windows defender's options being able to scroll up into infinity. The problem in question is most likely a compatibility issue, not a bug.
    Tuesday, February 6, 2007 10:16 AM
  • Yea, I just noticed this problem as well. AIM 5.9 no longer starts, but i could get it to start by closing all the svchost.exe that were network services. But then I could not start Firefox or IE, it would restart my computer. My rating doest appear either
    Tuesday, February 6, 2007 3:21 PM
  • Experience index does not display, correct.

    I tried restoring with no luck! 

    I noticed this in the 'WMI Control Properties' under computer management -> services & applications -> "WMI Control Properties"

    the information box on that properties screen under ('more actions') says:

     

    Failed to initialize all required WMI classes.

    Win32_Processor: Win32: Access is denied

    Win32_WMISetting: Successful

    Security information: Successful

    Win32_OperatingSystem: Win32: Access is denied

     

    i'll investigate further...

    Tuesday, February 6, 2007 5:54 PM
  • After hosing wmi, attempting a bunch of random old windows XP fixes for it...  i'm back to square 1 minus 1...

    now the WMI control properties says:

     

    Win32_Processor: <Null>: No such interface supported

    (same for win32_operatingsystem)     investigating this... i've tried reregistering the dll several times... 

    Tuesday, February 6, 2007 8:02 PM
  • Yes, I also noticed the experience index doesn't show, the network works fine for me as I am using it right now, but it always has that red X over it, it's been like this since maybe the second day I had it, which was probably around January 28th. I think we need a fix for this ASAP. 
    Tuesday, February 6, 2007 8:52 PM
  • I also can not play any media files. avi mp3 etc...
    Wednesday, February 7, 2007 3:51 AM
  • Same problem here too Rcunn87...

    What kind of systems are you all running?

    I'm running a Dell E1505 w/ nvidia 2go, wi-fi..  yeah all that..

    Let's get to the bottom of this!!  

    Wednesday, February 7, 2007 5:04 AM
  • I can still use AIM and play media files, I just hope it doesn't get progressively worse, cause right now I'm having a lot of network failures I have to restart all the time although messengers keep working, websites stop loading, even when I try to go to the administration panel of my router
    Wednesday, February 7, 2007 8:24 AM
  • Well Aim 5.9 didn't work, I upgraded to 6 and that seems to be fine. I did a system restore last night and everything seemed fine until I woke up and I am back to where I was. My system is a HP P4 Northwood 2.8 w/HT, I have a ATI R. 9800XT, X-Fi Platinum, Sony Dvd writter, and a logitech mouse. All of those have some sort of driver except the Dvd writter. Should i post the programs i have installed?
    Wednesday, February 7, 2007 3:46 PM
  • I'm getting the same exact error.  I am running Microsoft Vista Business from the MSDNAA program.  Network and Sharing Center is slow to load and freezes.  Network icon shows I'm disconnected even though I am connected and also list the error:

    Connection Status:  Unknown
    Server Execution Failed

    I tried to install a 5.9.3 of AIM instead of 5.9.6 and this did not solve my problem.  I tried contacting customer service at Microsoft and they helped me narrow it down to this problem:

    Go to Start and in the search, type "Services" - Click on services and find the service called "Network List Service."  This was not started on my machine.  When I tried to start it, it told me the following:

    Error 1450 Insufficient Resources Exist

    This cannot be possible since my task manager is showing plenty of memory and processor power available.  I also am running a Dell e1705 with an Intel 2.16 Core 2 Duo Processor with 2 Gigs of RAM.

    Microsoft really needs to patch this.
    Thursday, February 8, 2007 5:58 AM
  • Yeah, I gave up. I tried everything, even went as far as uninstalling most of my development tools (VS2005, SQL Server 2005) and still nothing. Browsing the network took an insane amount of time, at work, I had to exclude my static network IP from the DHCP range since Vista wouldn't let me access the Network Connections section without a freeze of that window. I am really disappointed. Once the pretty eyecandy wears off, we seem to be left with a system that excessively constrains and limits what we can do coupled with a lot of instability.

    It's back to XP for me.

    I'll take another look at Vista in a year. Maybe.

    Thursday, February 8, 2007 2:03 PM
  • I have the same problem with the connection status unknown and server execution failed.  When I go into networks or sharing, most of the time it doesn't even load anymore or freezes.  My ATI Control Center also doesn't start anymore and thats a pain in the *** because I need to use it.  Everything else seems to work ok, like AIM and Windows Live Messenger.  I can play media files fine, some .avi files don't play for some reason.  They play in Windows XP though.  I wrote a trouble ticket into ATI about the control panel not starting to see if they have any ideas on how to fix it and they never responded back yet, it has been over a week.  I guess the only thing to do is to reinstall Vista or go back to XP.
    Thursday, February 8, 2007 8:46 PM
  • Yeah this is all so interesting,  I'm just glad we are all having a comparable problem.

    To everyone:  what does your WMI control panel say?   computer management -> services & applications -> WMI control snapin,    under 'more actions' on the right hit 'properties' and post what error it is you are having...  mine says 'access denied'.   This tells me that there are some definite security measures occuring that shouldn't be.   I've been messing with the local security policy a bit trying to remove all limits and restrictions just to see if i can find out what is getting blocked, because it's obviously something is being blocked from accessing resources.... including some of these services (such as that network list service)

     

    -j

    Thursday, February 8, 2007 10:15 PM
  • Yea mine does the same thing for processor and OS
    Thursday, February 8, 2007 10:21 PM
  • It says.

    Failed to initialize all required WMI classes.

    Win32_Processor: Win32: Access is denied.

    Win32_WMISetting: Successful

    Security information: Successful

    Win32_OperatingSystem: Win32: Access is denied.

    Thursday, February 8, 2007 10:33 PM
  • Mine says the exact same thing in the WMI Snap In Properties:


    Failed to initialize all required WMI classes.

    Win32_Processor: Win32: Access is denied.

    Win32_WMISetting: Successful

    Security information: Successful

    Win32_OperatingSystem: Win32: Access is denied.


    Help us Microsoft

    Thursday, February 8, 2007 10:38 PM
  • I researched on google.  And found this website

    http://groups.google.com/group/microsoft.public.win32.programmer.wmi/msg/1da6ab3690bc75a0

    but its only for Windows XP, also some people had success by typing in these:

    regsvr32 %windir%\system32\atl.dll
    regsvr32 %windir%\system32\netshell.dll
    regsvr32 %windir%\system32\hnetcfg.dll
    regsvr32 %windir%\system32\netcfgx.dll
    regsvr32 %windir%\system32\netman.dll

    but that didn't help me, the hnetcfg.dll failed, but all the others succeeded.

     

    Do anybody have a wireless card installed? If so what kind?

    Thursday, February 8, 2007 10:44 PM
  • I just tried that exact same thing.  I got the same result:

    hnetcfg.dll failed

    My wireless card is built in
    Thursday, February 8, 2007 10:59 PM
  • Is it an SMC by anychance? or have SMC Wireless utility installed?
    Thursday, February 8, 2007 11:01 PM
  • I dont have any wireless card installed. What programs do you have installed?
    I have
    Adobe Flash 9 ActiveX
    Adobe Reader 8
    Aim 6.0
    Aim 5.9
    Ati Catalyst Install Manenger
    Azureus
    Creative Audio Console
    Creative Audio Processing Object Module
    DivX Codec
    DivC Content Uploader
    DivX Converter
    DivX Player
    DivX Webplaer
    Java SDK 6.0
    Java RE 6.0
    Office 2007 pro trial
    Microsoft Visual C++ 2005 Redistributable
    FireFox 2.0.0.1
    OpenAl
    VLC 0.8.6a
    Viewpoint Media
    Thursday, February 8, 2007 11:18 PM
  • I'm using an Intel Pro/Wireless 3945ABG Network Connection
    Thursday, February 8, 2007 11:23 PM
  • I have :

    IC Card Reader Driver v1.8e2

    A+ 2006 Demo

    Adobe Flash Player 9 ActiveX

    Adobe Photoshop CS2

    Adobe Premiere Pro 2.0

    Adobe Reader 8

    AIM 6.0

    Apple Software Update

    ATI Catalyst Install Manager

    Audacity 1.2.6

    Audacity 1.3.2

    Audio/Video To Wav Converter version 1.0.3

    Auto Gordian Knot 2.27

    AVIcodec

    AviSynth 2.5

    BitComet 0.70

    BitPim 0.9.07

    BlueJ 2.1.3

    Codec Pack - All In 1 6.0.3.0

    Cool MP3 Splitter 2.2

    Deer Hunter 4

    Deer Hunter 2004

    DVD43 v3.9.0

    DVD Decrypter

    EA Sports online 2007

    Far Cry

    FEARCombat

    FIFA 2007

    GameSpy Arcade

    GrabIt 1.6.2 Beta

    Indeo Software

    iTunes

    J2SE Development Kit 5.0 Update 4

    J2SE Runtime Environment 5.0 Update 4

    Java(TM) SE Runtime Environment 6

    Lexmark 730 Series

    LimeWire PRO 4.13.0

    Logitech QuickCam

    Logitech Camera Driver

    LogMeIn

    Madden 2007

    Magic ISO Maker v4.8

    MailWasher Pro

    Medieval II Total War

    Microsoft Office FrontPage 2003

    Microsoft Office OneNote 2007

    Microsoft Office Professional Plus 2007

    Microsoft Visual C++ 2005 Redistributable

    MP4 Converter 3

    MSXML 4.0 SP2 (KB927978)

    MSXML 4.0 SP@ Parser and SDK

    Nero 7 Ultra Edition

    NetBeans IDE 5.5

    NHL 2007

    palmOne

    Paltalk Messenger PowerISO QuickPar 0.9

    QuickTime

    Realtek High Definition Audio Driver

    Return to Castle Wolfenstein

    Samsung USB Driver (MCCI 4.34) WHQL v3.0

    Skype 3.0

    SnagIt 7

    Test Drive Unlimited PUBLIC Beta

    Trophy Bass 2007

    Ultra ISO V6.56 SR-2

    Ventrilo Client

    VobSub v2.23

    Windows LIve Messenger

    WinFast PVR

    WinRar

    Xvid 1.1.2

    xVid MPEG4 Video Codec

    Yahoo Messenger

    Thursday, February 8, 2007 11:28 PM
  • Out of your programs that you listed, I also have installed:

    Adobe Reader 8
    Aim 5.9
    Azureus
    DivX Codec
    DivC Content Uploader
    DivX Converter
    DivX Player
    DivX Webplaer
    FireFox 2.0.0.1
    VLC 0.8.6a
    Viewpoint Media

    Thursday, February 8, 2007 11:31 PM
  • oh yea i did have itunes installed but i got rid of it to see if that fixed anything
    Thursday, February 8, 2007 11:49 PM
  • So are we ever getting this fixed? It's been almost a week already...  

    Friday, February 9, 2007 1:07 AM
  • I had the problem for over a week, I searched but there was nothing about it, so I thought I was the only person with the problem.  Until, I searched today and found this forum.
    Friday, February 9, 2007 1:12 AM
  • I was talking to someone from microsoft for 3-4 hours earlier and got no where
    Friday, February 9, 2007 1:20 AM
  • Hmph.  I just got this error 2day.  It says Server Execution Failed.  As soon as it said that, i also could not play any media what-so ever in any media playing application, including windows media center recorded tv.  I hope that it is resolved soon. 
    Friday, February 9, 2007 3:31 AM
  • Good, the more people that have this problem the more exposure we'll get in finding a fix... in the meantime, keep tinkering with the computer management settings! 

     

    I too have tried all the winXP fixes for WMI, no dice!!!

    Friday, February 9, 2007 4:22 AM
  • This is to my last post about having no media playing what-so ever. I actually just fixed it and got all media working by going to device manager and windows vista had a pop up dialog  box saying something was wrong and  it asked me if  i wanted to disable it.  So i did and now i can run all media again.  But i still have the "Server Execution Failed" error. 

    I also understand what caused my sound device to go all wrong and not be able to play media.  If i ran a program that was designed for xp, it would give me a fatal error about direct sound.
    Friday, February 9, 2007 5:02 AM
  • I originally had media playback problems too....interesting.  I fixed it but I wonder if that has to do with our current problem at all?
    Friday, February 9, 2007 8:55 AM
  • Okay, I have a question for all. I got pissed that I couldn't listen to music so I installed Xp Pro on my second harddrive and now it dosen't ask what I want to boot into. Is there any way to fix this?
    Friday, February 9, 2007 3:24 PM
  • not sure Rcunn,, sounds like another problem for another forum,  but try the  start->run-> msconfig    and click on the boot tab and see if you can modify the boot settings there. 

     ryan,  how did you get media playback to start working again? i still can't get mine to work...

     

    -j

    Friday, February 9, 2007 5:41 PM
  • I installed all the Vista drivers from the Dell.com site for my graphics card and audio card when i installed Vista.  Turns out, the Vista drivers weren't needed and the XP ones were the ones that worked.  There was a small line on the vista drivers page that said "You may not need to upgrade your driver to this driver.  Windows XP drivers may work in some cases" or something like that.  So i uninstalled all of my devices in Device Manager and reinstalled them with the proper drivers.  Also make sure to get the proper codecs like DivX, XviD, AC3 Filter, etc.
    Friday, February 9, 2007 8:51 PM
  • Amazing Nittany, thanks for that.   I got my media player working again!

     

    Now back to the issue at hand.  I think the reason for the red X network icon is the network list service won't start.  At least, that's what provides the information to it.  I simply can't get it to start due to an error on service start...

    Does anyone know how to debug this or enable more verbose logging of it so that we can get a better hint of what's going on inside of it?

     

    Thanks!

    -j

    Friday, February 9, 2007 9:16 PM
  • Same happens to me. I'm using my Wireless Internet. My internet randomly disconnects with the red x on my wireless. I get the "Server Execution Failed" error. I have to right click the X. It takes about a minute for the options to appear. I click open networks. Takes another minutes. I click disconnect. Goes right away. And I press Connect to another network. Takes another minute. Finally I can re connect again. But it keeps happening and it's driving me nuts. I don't know why it started.

    I'm using Windows Vista Business... Standard programs. Anything yet guys?
    Saturday, February 10, 2007 10:58 PM
  • I had this problem too and was hoping there would be an answer here.  This is how I fixed the media playback issue that seems to be half of this problem...

    System restore worked the first time this happened but not the second.  I remembered that there was some compatibility warning for my Creative Audigy 2 sound card game port.  So I disabled the game port and the sound card in device manager.  At that point I could once again play MPEGs... so I knew the card was to blame.  I reinstalled the driver package from Creative and rebooted.  At this point my machine did not have the audio driver installed at all.  I let windows search for a driver and it found the Audigy WDM.  Now I have media playback again.  This is pretty typical of Creative.  When XP came out it was a full 6 months before I had a stable system because of my Creative card.  I still have the "Server execution failed" message and the red X.

    Sunday, February 11, 2007 3:28 PM
  • I'm just wondering if we'll ever get a fix.
    Sunday, February 11, 2007 7:45 PM
  • To Microsoft:

    Here are the specs:
        -Windows Vista Business Edition (seemingly)
        -Network List Service (netprofm) will not start
        -Network Task Bar Icon is slow or unresponsive
        -Network and Sharing Center is slow or unresponsive

    There ya go.  Fix it.
    Sunday, February 11, 2007 7:56 PM
  • Does anyone else have UAC turned off? I have it turned off and Security Alerts too, every time I go to the Security Center I have to attempt to turn on everything Firewall works fine, and Automatic Updating, but when I go to Malware Protection, it doesn't seem to know I have Windows Live OneCare installed, Windows Defender is off and when I try to turn it on it just updates definitions but doesn't turn on.
    Monday, February 12, 2007 1:26 AM
  • I'm with you guys on this one.
    Network List Service is set to Automatic,
    however it is not running.
    When attempting to run it I get the Error 1450 with the whole insufficient memory speech.
    Same red X in the system tray though clearly I'm on a network and using the internet else I wouldn't be able to post this reply :)

    Vista is still young.. let's hope for a patch up soon.
    Monday, February 12, 2007 4:07 AM
  • I'm in as well - same issues.  I have nothing further to add - but I figure the more complaints, the better right?  Please Microsoft - fix it fast.  This is my laptop for work and I'm *this* close to having to go back to XP.....
    Monday, February 12, 2007 2:15 PM
  • I have the same problem after upgrading from XP.  Persistent red X on the network icon in the systray and Vista telling me it doesn't see any networks although I can see all the boxes connected to the network.  I can't change network type from public to private, or do anything with respect to network control,  because when I go into the Network and Sharing app, the app freezes.  The only way out of the app is through Task Manager.  Anyone else see this behavior?
    Monday, February 12, 2007 4:12 PM
  • I also noticed that in my computer properties, it displays my processor and my Memory (ram) as 'unavailable'.  Is anybody else experiencing this?  they might be linked to the "server execution failed" error.
    Tuesday, February 13, 2007 12:08 AM
  • Mine is listed as unavailable too.
    Tuesday, February 13, 2007 12:24 AM
  • Same here.
    Tuesday, February 13, 2007 12:47 AM
  • Interesting, does anyone else here have a tv tuner card?  Mine stopped working the day i received the error.  Idk, maybe its just my pc.
    Tuesday, February 13, 2007 3:33 AM
  • Crex,

     

    This is because the WMI service doesn't have access to the WIN32_processor and Win32_OperatingSystem classes for the information service.

    Computer Management ->  Services and Applications -> WMI Control -> (right menut) more actions-> properties... and you'll see the error.

     

    This indeed started to occur the same time as the network issues we were seeing, and are by all means - related.

     

     

    Tuesday, February 13, 2007 4:54 AM
  • I had the same problems as everyone:  server excecution failure, couldn't play audio files which all happened seemingly randomly.  I was browsing the intarweb and listening to a song, then all of a sudden the next song won't start and wmp is jumping down the playlist like there's a fire or something.
     
    I simply did a windows restore to this morning (most recent restore point) and everything seems to be working fine.  windows update wasn't scheduled to run at the time this issue occurred, and i wasn't installing any new software.  because our issues started at different times, i doubt the issue has to do with a bad update.  because most of us seem to be running wireless, i believe this might be the issue... an internal error detector that changes the state of the software to something unacceptable and saves this to memory so it starts up with the same issue.  then, because of the media sharing ***, media player determines that because the internet connection is behaving illegally, the music/media might be being illegally used (somehow); and therefor disables playback.
     
    now- that's all conjecture, but one thing is true:  system restore fixed the symptoms for me for now.
    Tuesday, February 13, 2007 5:21 AM
  • system restore is not an option, and I'm sure it will break again in the future
    Tuesday, February 13, 2007 8:09 AM
  • well a long with this problem, now my AIM stopped working..  Tried to reinstall it, still doesn't work, I get A server error occured when trying to sign on.  This is starting to really piss me off, I'm going to go back to windows xp soon.
    Wednesday, February 14, 2007 12:12 AM
  • the only aim that will work is 5.9, earlier verions don't work, and 6.0 doesn't work anymore.
    Wednesday, February 14, 2007 12:46 AM
  • Although I can't view my RAM or processor information in Computer properties, that information is displayed on my Welcome Center.  Is that the case with everyone else?
    Wednesday, February 14, 2007 1:44 AM
  • Yes ryan,

     

    I too can see my processor and ram information on the welcome center screen.  Probably because this doesn't poll the WMI to get the information.

    Wednesday, February 14, 2007 2:37 AM
  • It's rather frustrating that we can't get a fix even when we're posting on Microsoft forums. Has anyone tried reinstalling WMI? I don't know how to do it so I know it was possible in XP, I think we should try it .... if anyone can figure out how to do it
    Wednesday, February 14, 2007 4:47 AM
  • I'm having the same issue.

    I first noticed a problem with Vista when I tried to load my "Net2Phone" software, the window did not load correctly.

    Then someone tried to send me a simple audio clip through Live Messenger and it would not play, Messenger closed with an error.

    Later, my wireless connection stopped and when it restarted the icon had a red X over it in the task bar.  The usual "Connection Unknown, Server execution failed" message appears.

    I HAD NOT MADE ANY CHANGES OR INSTALLED ANY SOFTWARE FOR SEVERAL DAYS, but yet the problem suddenly appeared.  I thought I might be able to do a System Restore to an earlier point, but for some odd reason my System Restore had NO RESTORE POINTS!!  I have 27gb open on my HD, I did not turn Restore off, but yet all of my previous restore points were gone.

    I uninstalled everything I had installed through 2/1, including Norton A/V, Novell Client Preview and Dell QuickSet but it didnt have any effect.  I also went back further and uninstalled AIM Messenger but that had no effect either.  I will say that AIM worked earlier in the day but after the problem appeared it would no longer work.  I did notice that the Viewpoint Media Player had been installed by AIM earlier in the day, even though I had installed AIM in December.  Had to jump through hoops to uninstall that program because I kept getting the error message that I had to be logged in as an Administrator, even though I am the only user and I have Admin rights.

    This is an annoying problem that makes NO SENSE! It's like it came from NO WHERE and for NO REASON!  When might the great Vista God give us a fix?!?!

    I had been warned of many problems with Vista during development by someone "higher up" on their beta team.  Apparently MS would receive bug reports like this but simply write them off as "unable to replicate" and move on, completely ignoring the issue in order to get the product available for RTM status as quickly as possible.  I didn't believe this person at first, but now I do.

    Wednesday, February 14, 2007 11:02 AM
  • I'm just going to reinstall Vista again, even though the same problem will probably happen again.
    Wednesday, February 14, 2007 3:40 PM
  • I am having the same problems.  Brand new HP laptop - 1 week old.  Everything worked fine until i noticed MS Outlook was being a little weird.  Rebooted, fixed my Outlook problem, but i could not listen to music/movies/media - seemed to happen out of nowhere.  Then i noticed the red x and the same error messages you are all receiving.  The network situation sucks and it needs to be fixed, but in the meantime i still cannot get any media playback.  I am still getting errors in every application i try to use to play MP3s.  I tried uninstalling and reinstalling the sound card but i continue to get the same error.  Any other ways anyone has resolved this problem so i can at least listen to my music while i'm miserable with the rest of vista?
    Thursday, February 15, 2007 7:55 PM
  • There still doesnt seem to be a "fix", an no acknowledgment from MS either that a problem exists.  It seems to be becoming more widespread and there's no rhyme or reason as to why the problem occurs, except that the basic symptoms are all the same...  No Network Sharing Center functionality, No Sound and No Processor or Memory acknowledged from Computer-Properties window, amongst a few others.

    Hopefully there will be fix sometime soon.

    THIS IS GETTING VERY ANNOYING!!!

    Thursday, February 15, 2007 9:13 PM
  • Just an update.  I tried doing an in place upgrade to cure the red X and malfunctioning WMI but it failed maybe 3/4 of the way through.  I also removed and reinstalled all of my network adapters (the real ones and the virtual ones), removed my antivirus and removed my IM programs, all to no avail.  I don't have a wireless card.  I do still have my restored ability to play media files since I reinstalled the audio card drivers.  Another note, the system restore worked the first time, fixing both the network and multimedia problems, but the second time it did nothing, even though I restored to the same point both times.
    Friday, February 16, 2007 4:47 AM
  • Back again..
    Yea, I also felt the media playing death/plague and random system performance attributes disappearing from the System Properties in addition to the norm.

    The blame for most of my damage is attributed to instant messenger programs-
    AIM, Yahoo, Windows Live, GoogleTalk...

    My VAIO was less than a week old when this all started, but I was able to roll back with system restore just fine. Using AIM 6.0 instead now and so for no issues. Kinda sad that Windows Messenger isn't even compatible with it's native OS.. sigh.
    Sunday, February 18, 2007 1:28 AM
  • Same problems here except I can still play media files. I don't think this is as much of a Vista issue as it is a bug with the way third-party apps work. Something between them obviously got ****ed up during the development process. At this point it seems any instant messenger program that uses those protocols is causing this issue. My specs are as follows:
    Mid to Late 2005 Dell Dimension 3000/Xoxide X-Ventilator Hybrid
    Microsoft Windows Vista Ultimate 32-Bit Edition Retail/Full
    512MB Dell Standard PC3200 RAM @ 333MHz
    Intel Pentium 4 Socket 478 @ 2.8GHz (Single Core/No HyperThreading Technology)
    Integrated Dell/Intel 10/100 Ethernet
    VisionTek/ATI Radeon X1300 PCI Graphics Card
    Dell-Custom Intel Board, Chipset base currently unknown/forgotten
    AT&T High Speed Internet (Best Plan @ 6.0MBPS) With 2Wire HomePortal 2700HG-B With Built-In Wired/Wireless Router, Connected Via 10/100-Base Ethernet, (Using 100-Base).


    Normally I wouldn't be so detailed but since the real cause of this is still unknown, and because there's such a broad choice of possibilities as to why we get this error, all the information we can attain on it helps MicroSoft and the third-parties find a plausible solution.
    My recommendation is do not use any instant messengers or download them. This probably only seems to occur on full/clean installs of Vista so far. My friend who did an upgrade install from Microsoft Windows XP Media Center Edition (Most Recent Version) hasn't had this problem...of course the apps were already installed at the time too...
    Tuesday, February 20, 2007 2:45 AM
  • FireFox 2
    ViewPoint
    Adobe
    AIM

    I'm guessing it's down to the IM systems or FireFox then.
    Does anyone here not have either of those installed? If so, then we're looking in the wrong place.
    Tuesday, February 20, 2007 2:49 AM
  • I reinstalled vista on friday.  Everything is working so far.  I have AIM 6, Windows Live Messenger, and Yahoo Messenger 8.1 installed and seems to be fine so far.  I also got MouseWare 9.0 from logitech to install for my mouse because the bastards didn't release a Vista version because they want us to go out and buy their new laser mice that are like $60 or more.
    Tuesday, February 20, 2007 3:07 AM
  • One common "thread" I've seen with most of the users having this issue is AOL/AIM Messenger.

    I too had installed AIM in December when I installed Vista, but had only used it ONE TIME until 2 days before the Network issue started on my machine.  And, my list of Installed Programs showed that the Viewpoint Media Player been installed on the VERY DAY that the issue started.  That is a media player that AIM installs, but had apparently not been installed until I used AIM that day.  Note that I DID NOT install it myself.

    I really think AIM is at least one of the major causes.  I've always said that AOL Software was the worst in the world, so I'm not surprised.  I like the AOL service for its content, but I refuse to install the software because of all the extra poop it forces you to install along with it.

    Lastly, I also did a complete reinstall of Vista on a formatted HD and so far it's working great again.  But I will not install any software that's not specifically Vista compatible until this issue is fixed.

    Tuesday, February 20, 2007 4:53 AM
  • New here myself. So far this is the ONLY place I've been able to find this issue.

    I've had all the issues described in this thread (with the exception of playing audio and video).
    Likewise, I have Vista Business via MSDNAA with the college that I work at (we are currently testing Vista and learning its... quirks).

    Still no solution for me. I'm actually quite far more interested in the cause.

    Adobe 8
    Firefox 2
    AIM 5.9.3
    NX Client

    These were the ONLY programs installed before this issue began. Can anyone verify independently if the culprit is Firefox 2 or AIM? I haven't seen this in a 64-bit version... YET.

    A little background as well:
    During the time before my network connectivity had its little red X enter my life, I was having network issues where I would not be able to ping or get outside of a subnet on my network. HOWEVER, if I was already connected to a web page or application that was beyond it, those connections remained active. If I tried to repair the connection, the system would blue screen and reboot on me.

    At least, until I'm in the final state the rest of us are in.

    Anyone have similar experiences?
    Tuesday, February 20, 2007 9:32 PM
  • Interesting...it has to be IM or FireFox related then. Any chance that FireFox's default browser settings could have modified or corrupted the network service settings?
    The IM programs may have done this as well with their protocols, which are probably incompatible with Vista.
    Tuesday, February 20, 2007 9:53 PM
  • I'm having this issue as well using Vista Home Premium 32-Bit on a Dell Inspiron E1505 laptop.  I'm not exactly sure when the issue started but i originally noticed it yesterday.  I had AIM 6.0 installed.  Uninstalled that and that didn't change anything.  I've never had Firefox on this computer.  I'm trying to uninstall viewpoint media player and i'm getting an error about i must be logged in as an administrator to do this.  I'm logged in under the only user account i have on this computer, which is the administrator.  Don't know if that's related or not.

    Oh well, i still haven't decided if i want to re-install Vista or go back to XP until this issue is resolved.

    Tuesday, February 20, 2007 11:59 PM
  • It seems we have narrowed the issue down to the IM programs, specifically AIM and it's ViewPoint Media Player. Is there anyone at all who has gotten this error and does NOT have AIM or ViewPoint Media Player installed?
    Wednesday, February 21, 2007 12:09 AM
  • All of you need to see the "common thread" that seems to be the issue...  AIM MESSENGER!!!

    You can uninstall until you're blue in the face, but nothing will solve the problem once it appears until you completely Reinstall Vista on a formatted drive.  When you've done this, DO NOT install AIM or AOL!  I'm telling ya, this is the problem.

    I DID NOT have this issue until I started using AIM with Vista!   While I did have it on my computer for a while before the problem began, I didnt use it.  Within 2 days of using it, the problem started.  And the Viewpoint Media Player from AIM installed itself the VERY DAY that the problem reared its ugly head.

    I might not be a Vista expert, but common sense says AIM is the likely cause.

     

    Note: Viewpoint wont uninstall properly because it's not Vista compatible yet.  I had the same issue.

    Wednesday, February 21, 2007 12:20 AM
  • A reinstall is not necessary. Obviously it's registry/service-related. All we need is a patch...but it may be a matter of time until one is developed.
    Wednesday, February 21, 2007 12:27 AM
  • I'm not so sure about just a patch.

    After the problem occured, I compared my Vista install to a spacecraft in a decaying orbit.  With every restart and each day other issues showed up.  It was like the install was slowly decaying, piece by piece.  I'm not exagerating.  I would have loved to wait for a patch, but I could not risk a crash and losing information.  And since this is the only place in the known Universe where the issue is being addressed, God only knows how long it will take for a fix from whoever.

    Regardless, the only fix right now is to reinstall Vista.  I don't believe installing OVER a current install will necessarily work, that's why I recommend a complete new install.

     

    Has anyone bothered sending a link to this forum thread to AOL techs or their 6.0 Beta Team?

     

    Wednesday, February 21, 2007 12:36 AM
  • Well I'm speaking of the type of patch where it would not only prevent the issue, but fix it as well...sorta like a hotfix.
    Wednesday, February 21, 2007 12:43 AM
  • I just went to the AIM Beta Testers Chit Chat on AOL and posted a thread with a link back to TechNet.  Hopefully AOL will be made aware of the issue if they're not already.
    Wednesday, February 21, 2007 12:52 AM
  • even if AOL is made aware of the issue, it's Microsoft that has been neglecting our claims for the past month and a half...  
    Wednesday, February 21, 2007 12:56 AM
  • I had the same problem and I've NEVER had AIM or Viewpoint installed on the machine. I ended up reinstalling Vista, for the THIRD time, and slowly reinstalling all my applications to see if one of them was suspect.  So far, everything works...but it may only be a matter of time. Somebody at Microsoft should take this seriously.  Reinstalling the OS isn't much of fix.
    Wednesday, February 21, 2007 1:00 AM
  • I think I'll reinstall and try to duplicate the error. At least that way I can track down exactly what program is causing it. I believe it's AIM as well. Now I'm going to find out.

    Watch everything work this time. :P
    Wednesday, February 21, 2007 1:34 PM
  • Although, I just realized that I did have ANOTHER program installed.
    Norton Antivirus Corporate Edition 10.

    I throw that out there in case it's another common program we are all using....
    Wednesday, February 21, 2007 1:53 PM
  • I to have an E1505....

     

    I have not yet tried to uninstall aim 6.x or viewpoint media player.   However if you want to get rid of the administrator nag screens go to control panel -> users and passwords (or something like that) and find the User Access Control option and disable it!   rock on!

     

     

    Wednesday, February 21, 2007 5:22 PM
  • Hi all,

    I did some digging and found out that viewpoint does not have it's own uninstall program which is why add/remove pgms craps out- you have to do it manually. (Reg keys, remove the folders in program files, yadda yadda)  Unfortuantely manually removing it did not help (although it did remove itself from my add/remove programs list) I also double checked msconfig and my background services to make sure it wasn't still popping up.

    I also have SAV CE installed.  I had AIM 6 installed when this first started - it's now removed.  I have all the same items installed on my home system as I do at work, yet only my work laptop is having the issue.   Any chance it's laptop related as opposed to workstation?  what is everyone using?  I'm getting desperate. I've given myself until Friday to resolve, then I'm reinstalling Vista.  If it comes back again, then it's back to XP for me.

    Has anyone who has done a fresh reinstall had this issue re-occur? 

     

    Wednesday, February 21, 2007 5:39 PM
  • I too am using a Dell D820 laptop, received new on 12/1, the same day I installed Vista.

    I would say it's unlikely to be related or limited to a particular type of machine.  Laptops do have wireless cards in common, which most desktops do not, but again it's highly unlikely.  I still believe AIM is the probably cause.

    I know it's not from simply installing AIM though, as I installed it on 12/18 but didnt use it until 2 days before the error occured.

    Wednesday, February 21, 2007 6:04 PM
  • Hey,

     

    Ive been reading this thread cause I have the same or similar problem. I'm not as knowledgeable as you guys seems to be but can generally follow the discussion. I'm still running vista beta due to lack of funds at the moment, and this happend to me two days ago. My downloads seemed to be disappearing from the desktop as they finished (which turned out to be IE crapping out and cancelling them) as none of my video/audio files would play. Vista suggested my sound drive was the problem (realtek AC'97). I updated my sound drivers to a vista release, and things seemed mostly functional except for the task bar icon not recognizing the network. I had recently, about a week ago, had aim 6 crap out on me; it just wouldnt connect tot he server. I put old aim on and worked fine, and after I had finished this sound problem I put new aim back to test it and it seems fine. After reading through this thread I was content that evertyhing was working and would continue to check back to see if the problem had been solved. Just to add, Im not sure what kind of windows games you play, but this problem wont let me play unreal tournament 2004, as the game doesn't know I have internet and wont even try to look for servers. WoW seems fine, but I havent tried anything else yet. Ill try to get retail vista within the next week or so, so hopefully a fresh install will solve it. I will continue to check back and let you know if I figure anything out. Good luck and thanks.

     

    -nik

     

    *hl2.exe also started failing when I try to launch counterstrike: source. bah.

    Wednesday, February 21, 2007 6:31 PM
  • Although it may seem that it has to do with Dell...and I kinda wish it did because I hate them now lol...it shouldn't matter what type of system you are running. I'm running a full retail copy of my OS, and I did NOT get it from Dell, so it's not a Dell-based OS, so I know it's not Dell that's causing the issue. As for the wireless card, my system doesn't have that either, so that can't be a factor for this, atleast for the most part. It is also not Norton because, like I said in the past few sentences, I don't have it. It seems we have narrowed it down to AOL's products. As for whoever said the installed the newest version of AIM and didn't get this error, you're pretty **** lucky. That's exactly what I installed and I got the error. :P
    As for ViewPoint Media Player, if it has no uninstaller, and isn't uninstalled along with AIM, then we have a problem here. AOL needs to release an uninstaller A.S.A.P. before someone sues them for claiming their software is mal-ware, since it did in fact install another program without knowledge or permission of the user(s).

    Lastly, for the Microsoft basher that said MS is neglecting this, just calm the **** down. MS is releasing a whole ****-load of updates, patches, and hotfixes in March that they've been working on since before the release of Vista. If AIM or MS doesn't come forward with a fix soon we're just going to have to wait and see what happens in March. You may think this is a huge deal and MS needs to fix it A.S.A.P., but not only would it be a third party issue, but MS also has bigger bugs to fix at the moment. Remember this, just because MS releases updates and fixes for bugs on their system for free, doesn't mean they have to. No where in the license of the product does it say that you get all the updates and bugs fixed when you buy it. MS provides updates and fixes for free because they care about their products and their customers, so next time you wanna get pissed at MS, don't. Get pissed at the guys who made the program that ****ed up your computer.

    I know that didn't help the situation much physically, ...or virtually lol..., but it'll hopefully atleast help you guys calm down. Now on to the real issue at hand. We do know it's AOL's products that are causing the issue, but has anyone been able to re-create the issue without ANY AOL-based or Plaxo-based products on their system? If so, it's important that you tell us now.
    Technical info: Is anyone else's Windows Explorer window freezing when attempting to open the Networking And Share Center? Also, is EVERYONE else's computer rating advisor missing from the main computer properties window as well? Has anyone attempted and successfully removed ViewPoint Media Player, and if so, is the error gone? Does AIM or AIM Pro still work after the removal? Check the properties for ViewPoint Media Player and make sure it's officially AOL's and not a third party app, such as Plaxo. Whoever said they created a thread on AOL's forums, make sure you mention ViewPoint Media Player in it so they know that is also a possibility for the problem. And my last sentence before I go: Can you please link us to the AOL thread you made from here?

    (Jeez...too much needed to be written...)
    Wednesday, February 21, 2007 6:35 PM
  • Well, I've spent the last few days trying to fix this bugger and I've come across some interesting things.

    Firstly: I have freshly reinstalled and have EVERYTHING installed and configured that I did before EXCEPT AIM. So far so good. But It's only been running a few hours now.

    Secondly:
    I tried some XP repairing tricks for similar errors outlined on this web page: http://www.pcreview.co.uk/forums/thread-531768.php
    And in great detail on this Web page:
    http://groups.google.com/group/microsoft.public.win32.programmer.wmi/msg/1da6ab3690bc75a0

    These did not help me. But I encourage those of you with troubles to try these just the same to see if it fixes your woes. In any event, I did come across some interesting things while doing this.



    1) On the second web page he talks about reinstalling all the *.mof files in \windows\system32\wbem\ folder. I was unable to do this as I couldn't find their location on my Vista DVD. It's possible they're in the *.wim file which i didn't care to track down and figure out how to expand.

    2) When attempting to reregister certain dlls, I got an error code 0x80070716 for hnetcfg.dll.

    3) Obviously, as we all now know, the Network List Service won't run, it returns an error of not enough resources.

    4) Even though winmgmt service is running, it DOES NOT have an ID in the tasklist, whether using tasklist.exe or tlist.exe (for those of you who remember this program, also mentioned and used in the second web page). Thusly, I have no way of knowing the process ID it's assigned in the registry actually matches it's real process ID.

    *5) The Logs directory at \Windows\System32\wbem\Logs contains various logs of this service. One specific Log, the WMITracing.log, has LOST OWNERSHIP. This prevents anyone, even the system from writing to the file. The owner is SUPPOSED to be System. However, no owner is displayed. As a result, you can't take ownership of this file or give it to someone else. NOT EVEN THE ADMINISTRATOR (by name) was able to do this. Fun. What makes this doubly strange is that I deleted the file in safe mode, and when I rebooted the system had recreated it and promptly lost ownership and rights to it again.

    6) Whether related or not, if you reboot the system after destroying the \windows\system32\wbem\repository directory, if you quickly go to check your performance index, it says it can't be displayed and offers a link to recalculate it. Shortly there after, the link disappears. Not sure if this is related or not, just something I noticed.



    Well, I'm sorry I couldn't be a bigger help right now. But I'll see how long the system goes before troubles arise again. For the moment, as I've stated, no AIM is installed. OR ANY INSTANT MESSENGER PROGRAM. I'll be using www.meebo.com in the meantime. hehe

    I hope something in there will trigger someone else's mind on their search.

    Cheers!
    Wednesday, February 21, 2007 7:53 PM
  • Network List Service won't run because it has certain requirements to run, and since WMI doesn't display that information, the service thinks it's 0 and so it doesn't run.  
    Wednesday, February 21, 2007 10:09 PM
  • As I had indicated previously, I never had AIM, Viewpoint or any other IM installed on the box and I had all the same symptoms, red X, no rating in the advisor and network and sharing center would freeze and be useless.  It's not a Dell box, it's a Gateway core2duo, on a wired network so no laptop or wireless issues.  The last (3rd) reinstall of Vista has fixed things so far.
    Wednesday, February 21, 2007 10:15 PM
  • Can you give me the exact path and name of all the files ownership was lost to, as well as any known registry keys? I may be able to work on it if I can get that information.
    Wednesday, February 21, 2007 10:20 PM
  • Here's the AOL link to their beta forum...

    http://messageboards.aol.com/aol/en_us/articles.php?boardId=567777&func=3&channel=People%20Connection

    You may have to sign-in with an AOL or AIM account to view the board.

    I didnt post too much there about the problem, but would probably be a good idea if you did.

    Also, there's a thread on their board about a similar issue, it may be related to what we're seeing.

    Wednesday, February 21, 2007 10:44 PM
  • Replied And Submitted A Bug Report.
    Wednesday, February 21, 2007 11:36 PM
  • I was having this problem as well, including really slow system startup.  After seeing this forum, I uninstalled AIM 6.0, and noticed ViewPoint had been installed yesterday... conveniently enough, that's when my problem started.  So, I uninstalled that as well.  After that, I did a System Restore back to the day before yesterday... Computer re-started, and everything works like a charm. (y)
    Thursday, February 22, 2007 5:19 AM
  •  SugarDx wrote:
    Can you give me the exact path and name of all the files ownership was lost to, as well as any known registry keys? I may be able to work on it if I can get that information.


    Unfortunately, not anymore at the moment. I reinstalled the system. I'm actually trying to break it again.


    Thursday, February 22, 2007 2:12 PM
  • It's cool-if you find them out just post them up! :D 
    Thursday, February 22, 2007 11:22 PM
  • I found this interesting about Viewpoint Media Player...

    http://en.wikipedia.org/wiki/Viewpoint_Media_Player

    I'm looking for a list of other software that installs this player, I'm sure AOL is not the only one.

    Thursday, February 22, 2007 11:39 PM
  • "Malware claims

    Viewpoint is commonly installed with AIM without the explicit consent of the user because it is considered to be a required package.

    VMP is sometimes considered to be spyware because the license agreement states that the software collects information about users' interactions with advertisements and the browser and operating system in use. This information is reported to Viewpoint's customers, and is delivered with a unique identifying code. Again, this information is sent without any notification to the end user."

    I think AOL owes us an explanation...
    Thursday, February 22, 2007 11:54 PM
  • AIM isn't the problem chuckleme don't jump to any conclusions

    Friday, February 23, 2007 12:21 AM
  • AIM seems to be the common thread.  It must be at minimum a contributing factor, or have something in common with another software package that causes the issue.

    Can you offer another explanation?

    At least 2 of us had AIM and the Viewpoint Media Player was installed without permission on the very day the problem occured.  Seems rather odd to me.

    Friday, February 23, 2007 3:15 AM
  • AIM or one of it's components is the problem. I know ur trying to bash Vista and I don't give a ****, go do it somewhere else.
    Friday, February 23, 2007 3:17 AM
  • Same problem, Dell e1405, Windows Vista Home premium, "unknown - Server execution failed", not playing mp3 files, can't see Windows Experience Index, has AIM 5.9 installed.

    I fixed it via system restore, then it happened again (red x on network icon) when I restarted the system without disconnecting the internet connection first. Did another system restore, and uninstalled Viewpoint Media Player.

    I hope somebody is already working on a patch for this.
    Friday, February 23, 2007 10:18 AM
  • I noticed, while trying to "break" another Vista installation, that even though Viewpoint Media player is installed by AIM, it IS possible to uninstall the player. Just goto add / remove programs and remove it.

    However, I couldn't do that before, after I had broken Vista the first time, as has been detailed by others in this thread.

    For the time being, my system has been running nearly flawlessly with the exception of one crash, cause unknown. I think it's time to put AIM back on and see what happens.
    Friday, February 23, 2007 2:35 PM
  • Does AIM even use ViewPoint Media Player for anything other than advertisements? Will it run without it? I wonder if it's being caused by a combination of the two when they're running...
    Friday, February 23, 2007 9:00 PM
  • greetings all-

    I've been out of the loop for a while, but it seems that everyone is trashing on AOL/AIM. My problem was with AIM 5.9, but it is true that I had GoogleTalk and other messengers installed as well.

    After the more than well known 'server execution failed' stuff, I rolled back safely via System Restore.

    Granted I've repeated this, I want to point out that at least for me, AIM 6.0 is working fine and didn't kill my system, though it seems it is hit or miss for some of you other guys. I don't know about all this Viewpoint stuff...

    What interests me is what would compel the Network List Service to just DIE on us and give us the Error 1450 Insufficient Resources thingy.

    Something is inhibiting or tricking this service into thinking it cannot run.

    We've listed possible suspects that may have made this thing stop, but how can we get it running again?

    It's ridiculous to not be able to run WIndows Live or AIM just because of this. These are common programs that people use ALL THE TIME.

    Sunday, February 25, 2007 6:00 AM
  • Have you got this fixed yet.  i feel the problem lies here.  Not with AIM.  I noticed this problem started right around the time a expanded a partition.  Were you working with your partitions lately?  Thank you for any help you can provide.

     

    I too get the 1450 error.

    Sunday, February 25, 2007 6:00 PM
  • Some services use WMI to calculate system resources, since WMI is not working, these services can not calculate whether your system meets the minimum requirements to start the service. That's what makes Network List Service not start.
    Sunday, February 25, 2007 9:35 PM
  • Very true.
    We need a way though to get it running correctly again, as well as preventing this issue in the future.
    Monday, February 26, 2007 2:57 AM
  • much thanks, dazed.

    so it's down to why instant messangers kills WMI, now is it?

    Monday, February 26, 2007 5:01 AM
  • The problem may not be instant messenger, at least not by itself.
    I'm still trying to break this installation again. I've been using AIM since my last post without any issues (version 5.9). However, I uninstalled viewpoint media player before using it. So... Perhaps a combination of the two?

    Doesn't AIM use the player to display those annoying streaming video commercials in the top of the buddy list window?

    I guess it's time to put viewpoint media player back in.
    Monday, February 26, 2007 2:32 PM
  • I've the same problem, but I have no AIM installed and I don't want to play media files. It's a fresh install, only VisualStudio2005 is installed.
    It seems to be a security issue with the WMI, which results in the following:
    "The Network List Service service terminated with the following error:
    Insufficient system resources exist to complete the requested service."

    In the Comp. mgmt > Services and Apps > WMI Control Properties:
    Failed to initialize all required WMI classes.
    Win32_Processor: Win32: Access is denied
    Win32_WMISetting: Successful
    Security information: Successful
    Win32_OperatingSystem: Win32: Access is denied

    System restore doesn't help.
    Monday, February 26, 2007 3:08 PM
  • I agree about IM.  I'm starting to wonder if this isn't some file/app permission issue.  For what its worth, my problem showed up right after I resized one of my partitions.
    Monday, February 26, 2007 3:44 PM
  • I have the exact same Dell and I'm getting the same error. It's really bugging me even tho the network is still working... *sigh*
    Tuesday, February 27, 2007 2:06 AM
  • I managed to find an XP solution that resolves the Vista WMI issue.

    http://groups.google.com/group/microsoft.public.win32.programmer.wmi/msg/1da6ab3690bc75a0

    My WMi is working fine now, the network icon is working and WMI properties displays correctly.

    The above fix errors on one of the dll's but otherwise works fine. Credit to the Author. Where they state to kill/stop the WMI process can be replaced with a simple stop / start of the Service through the service control panel. Some might want to experiment running as a shared service and reporting back. I am taking a break from weeks of detective work and leaving my PC alone for a while to try and introduce some stability. My stability index started at -2 and is now 6.7 and rising.  One thing at a time.

    My network list service starts service starts fine.

    CAVEATS

    The above solutuion involes adding the Network Service account to the local Administrators group. Hard to swallow but better than my previous state of affairs.

    IMHO, UAC, permissions and general Security in Vista are poorly implemented, poorly documented and frustrating to an experienced home user. They have a product that runs fine out of the box, but try and do anything fancy such as tinkering, tailoring or tightening/loosening up and the whole thing breaks. The online help facility linked into events and errors is nearly always a dead end else hoplessly vague. What we had with XP was a homebrew V8 for petrolheads, Vista is a Barbie Pink Ferrari with a bonnet that can't be opened.

    Hope this helps, I certainly shared the frustrations of many of the posters here.

    Hurry up with Vista SP1 please MS !!

     

     

     

    Wednesday, February 28, 2007 7:15 PM
  • Please read my previous reply to the WMI issues.

    It refers to this link which solves teh WMI security issue.

    http://groups.google.com/group/microsoft.public.win32.programmer.wmi/msg/1da6ab3690bc75a0

    Wednesday, February 28, 2007 7:18 PM
  • Yes, I saw this on my google searches and actually referenced it here as well. A wonderful piece of work. Unfortunately, it didn't solve my issues under Vista.

    Anyone else have any luck with this method?
    Wednesday, February 28, 2007 8:58 PM
  • It didn't work on Vista.  
    Wednesday, February 28, 2007 9:11 PM
  • Sorry to hear that... Did all the steps work ?

    I have Vista Ultimate and it worked for me.... Strangely though, only after a few restarts... I thought it had failed at first.

     

    Wednesday, February 28, 2007 9:18 PM
  • I have a Toshiba laptop running XP SP2. On Sunday, I upgraded to Vista Ultimate (did NOT do a clean install, just upgrade). After spending at least 40 hours, got every thing working correctly. Then out of the blues, the same problem showed up (Server execution failed). Now, I don't have a Dell, it is a Toshiba. I am NOT running AIM or any AOL stuff. After giving up trying to fix it myself, I was able to talk to MS Tech. Yesterday morning, I spent close to 4 hours with one of them. He managed to solve part of the problem, The "Server execution failed" was gone and the Network & Sharing Center was back working (not freezing anymore). However, a new message replaced the "Server execution faild" appeared when you hover the mouse on the network icon. The new message said something like there is a conflict where two processes are starting in the same services (can't remember exactly). Apparently, the new problem relates to a specific service "Network List service" which refuses to start (see services). The first tech could not solve it and he elevated the issue to his research team. A second tech called me yesterday evening and worked with me for another hour or so. He could not resolve it either. In the process, my "Server execution failed" came back and the Network & Sharing Center is again frozen. He promised to consult with his higher ups and call me back with a resolution. While I did appreciate their fantastic effort, I am not at all thrilled with Vista or Microsoft.

    The moral of the story, it is a Vista bug and not AIM or another prgram. I think MS are now seriously looking at it and let's hope thay can find the culprit. Thank you for the great info in this thread.  

    Thursday, March 1, 2007 5:36 PM
  • I have the same problem. Network connection X'd out, AIM 5.9 installed, and media not playing. I installed AIM a while ago and the Viewpoint player installed on the same day.  It may be the problem, but it could also be a coincidence, with AIM being such a popular program.  This is becoming a widespread problem that NEEDS to get fixed soon.
    Saturday, March 3, 2007 12:22 AM
  • Agreed. AOL and Microsoft better do something soon before people start suing lol...
    Sunday, March 4, 2007 9:53 AM
  • FIXED!

    At least for me.  I had already taken care of the multimedia issue by reinstalling the Creative Labs SoundBlaster Audigy 2 drivers, but I still had all of the network issues described in this forum.  To finally fix the network problems all I did was add the Local Service account to the Administrators group.  I'm sure there is some particular file access or registry key access issue that I could have fixed directly and maybe I'll try to find the particular corrupted security setting at a later date.  Just in case you need it here are the steps I took...

    >>Right click "Computer"
    >>Click "Manage"
    >>Double click "Users and Groups"
    >>Click "Groups"
    >>Right click "Administrators"
    >>Click "Add to group..."
    >>Click "Add"
    >>Click "Advanced"
    >>Click "Find Now"
    >>Double click "Local Service"
    >>Click "Ok"
    >>"NT Authority\Local Service" should show up in the list now
    >>Click "Ok"
    >>Close Computer Management and reboot.

    Hopefully this will fix it for everyone.  If anyone finds the exact file(s) or registry key(s) that needed the permissions modified I'd be interested to know.

    Sunday, March 4, 2007 5:11 PM
  • IT WORKS!!! Thank you!
    Sunday, March 4, 2007 6:38 PM
  • Gah, the steps can't be done on Vista Home Premium and lower. The Users and Groups snap-in isn't there, and can't be added on Vista Starter, Home, or Home Premium. The only way to add administrators is through the control panel, and it only lists users created, not the Local Service.

    Bleh :(
    Sunday, March 4, 2007 7:53 PM
  • Found an error in that!
    It should be the following, unless your computer is just different:

    >>Right click "Computer"
    >>Click "Manage"
    >>Under the "System Tools" section, Double click "Local Users and Groups"
    >>Click "Groups"
    >>Right click "Administrators"
    >>Click "Add to group..."
    >>Click "Add"
    >>Click "Advanced"
    >>Click "Find Now"
    >>Double click "Local Service"
    >>Click "Ok"
    >>"NT Authority\Local Service" should show up in the list now
    >>Click "Ok"
    >>Close Computer Management and reboot.

    Testing it now-hopefully it works! :D
    Great job man!
    Sunday, March 4, 2007 8:11 PM
  • ATTENTION EVERYONE!
    THANK BLUESHOT FOR SAVING THE DAY! I just tested this and it officially works! I'll post this fix in a few other places to make sure no one gets left out. :)
    All credit goes to BlueShot!
    Sunday, March 4, 2007 8:28 PM
  • <3 you blueshot.
    Sunday, March 4, 2007 11:11 PM
  • Thanks blueshot that fixed it right up;  saved me a reformat so thank you very much

    I also found that some other services were affected by this bug, which can be fixed by adding both Local service and Service to the administrative group.

    Monday, March 5, 2007 6:14 AM
  • This definitely narrows tings down a lot :) However, I have to cast a vote for the Home Premium users. Sadly, I also cannot use this fix. Is there any other way that these services can be added to the administrative group?
    Monday, March 5, 2007 7:00 AM
  • Amazing fix...

     

     

    for you home users, i bet there is a way to use the command line to add the user to the group....

     

    start with: http://technet2.microsoft.com/WindowsServer/en/library/bbc58f6d-5283-4da2-9fc4-703503803fbd1033.mspx?mfr=true

     

    that might point you in the right direction!!??

    Monday, March 5, 2007 7:28 AM
  • Yes, I read that somewhere for Windows XP error but didn't think to try it on Vista, thanks  
    Monday, March 5, 2007 12:05 PM
  • It doesn't fix WMI, how can we do the same for WMI?  
    Monday, March 5, 2007 12:19 PM
  • You're right.  I still can't view system info, etc.  The thing is that I ran the WMI fix described in a previous post (which didn't help the networking or the WMI).  So now I'm not really sure if WMI wouldn't have been fixed had I not messed with it in the first place.  Did anyone not do that WMI fix but change the security settings?  If so, does WMI now work?  Also, I'm not all that familiar with the Home versions of Microsoft's OSs but perhaps you can modify the user accounts via safe mode.  I don't have a machine with a Home version of either XP or Vista to test on but it's probably worth a try.
    Monday, March 5, 2007 3:05 PM
  • From command prompt as administrator :

    net localhost Administrators /add Local Service

    then do a :

    net localhosts Administrator

    and NT Local Service should be listed.  Reboot and all is well.

    Completely fizxed my problem - I can go into network and sharing center without hangs and I can change network options - Oh Boy !!!

    I did NOT run the WMI fix detailed below and all seems to work fine!!!

    Good Luck!!

     

    Scott

     

     

    Monday, March 5, 2007 5:53 PM
  • I have lost many hours of sleep trying to resolve this problem. YOU SAVED THE DAY. I just tested it on Vista Ultimate upgrade and it worked like a charm. Thank you, thank you and thank you. I have a telephone appointment scheduled with Microsoft Tech this evening (this will be the 3rd time, already spent 4 hours with them to resolve this issue). With your permission, I would like to pass your FIX of this issue to them. Perhaps thay can help those who are not members of this forum.

     

    Best luck, wishes, thanks and all.

     

    Mike

    Monday, March 5, 2007 6:51 PM
  • Worked great.  Thank you for saving me a few hours this weekend.  At one point I though I was working on my linux box. :)
    Tuesday, March 6, 2007 2:27 AM
  • Has there been a solution yet to the problem of WMI. I still get the error "cannot access the Windows Management Instrumentation software. Windows Management files may be moved or missing". Any help with this issue please?

     

    Mike 

    Wednesday, March 7, 2007 5:46 PM
  • fixed the network browsing issue,

    BUT

    i still cant remote desktop into my vista enterprise.

    any solution for that ? it was working fine, then this all happened. applied the fix you guys recently posted. that solved network thing but not remote desktop.

    can you guys try to remote desktop into your computer and see if that problem is there for you too.

     

    Thanks

     

    Thursday, March 8, 2007 3:10 PM
  • ^ Did you try to eliminate then totally "reconfigure" all things to do with remote desktop?

    Are the RDP services working?

    What exactly is the issue? (I'm guessing you've tried all the usual troubleshooting stuff) This issue may no longer be related to this thread.

    http://weblogs.asp.net/astopford/archive/2006/02/28/439240.aspx



    Friday, March 9, 2007 3:12 AM
  • yea tried everything related to rdp. closed firewall, enabled rdp, tried less secure client option, but doesnt connect form inside or outside of network.

    was working fine when i installed vista , then suddenly stopped working and i realized i have same network problems as people here. also somebody else posted rdp not working..

    tried to do everything again for rdp..but nothing works

     

    Friday, March 9, 2007 5:51 AM
  • These steps don't work for me for some reason.

    >>Right click "Computer"
    >>Click "Manage"
    >>Double click "Users and Groups"
    >>Click "Groups"
    >>Right click "Administrators"
    >>Click "Add to group..."
    >>Click "Add"
    >>Click "Advanced"
    >>Click "Find Now"
    >>Double click "Local Service"
    >>Click "Ok"
    >>"NT Authority\Local Service" should show up in the list now
    >>Click "Ok"
    >>Close Computer Management and reboot.

    When I click manage, the window that shows up doesn't have anything that says "Users and Groups." I can't get past this step, and therefore can't fix the problem. I can't go through the command prompt either, as the net command isn't working. Please help!

    EDIT: Forgot to mention that I'm using Windows Home Premium, and User Account Control happens to be turned off. Even with it on, I don't see the group section in the manage window.
    Sunday, March 11, 2007 9:33 PM
  •  JLarkin wrote:
    These steps don't work for me for some reason.
    <snip>I'm using Windows Home Premium<snip>

    try this solution posted above:

     SWAndersen wrote:

    From command prompt as administrator :

    net localhost Administrators /add Local Service

    then do a :

    net localhosts Administrator

    and NT Local Service should be listed. Reboot and all is well.

    <snip>

    Scott

    Monday, March 12, 2007 5:09 AM
  • I'm running Vista Home Basic, in which localhost was not available.  I had success with the following:
    • Boot Windows to Safe Mode.
    • From the command prompt, enter net localgroup Administrators LocalService /add
    • Verify using net localgroup Administrators
    • Restart Windows normally.
    This would work for me only in Safe Mode.  It seems to have fixed the network and media issues.  However, now I find that my Guest user account won't startup fully -- don't know if it's related to what I did.
    Monday, March 12, 2007 9:54 AM
  •  paul.a wrote:
    I'm running Vista Home Basic, in which localhost was not available. I had success with the following:
    • Boot Windows to Safe Mode.
    • From the command prompt, enter net localgroup Administrators LocalService /add
    • Verify using net localgroup Administrators
    • Restart Windows normally.
    This would work for me only in Safe Mode. It seems to have fixed the network and media issues. However, now I find that my Guest user account won't startup fully -- don't know if it's related to what I did.


    fixed my "connection status unknown" problem.  great work.  thanks a bunch.
    Tuesday, March 13, 2007 2:16 AM
  •  Tool2Die4 wrote:
    paul.a wrote:
    I'm running Vista Home Basic, in which localhost was not available. I had success with the following:
    • Boot Windows to Safe Mode.
    • From the command prompt, enter net localgroup Administrators LocalService /add
    • Verify using net localgroup Administrators
    • Restart Windows normally.
    This would work for me only in Safe Mode. It seems to have fixed the network and media issues. However, now I find that my Guest user account won't startup fully -- don't know if it's related to what I did.


    fixed my "connection status unknown" problem. great work. thanks a bunch.


    Worked for me too. Thanks a lot!
    Tuesday, March 13, 2007 12:03 PM
  • I had the same problem. It took me a while to remember all the updates and changes ect. i had made to my computer when it started happening. When reading through the 10 pages of posts i came across one that asked if disabling UAC was the problem.
    This got me to remembering. When i had UAC enabled everytime i started AIM after a minute or so i would get an alert that Aim was attempting to execute a process (im assuming viewpoint mediaplayer). I would always cancel it because aim would always work fine without it before it launched. But a while ago I disabled UAC and sometime after that i logged on to AIM. Without the UAC it must have just executed the process and installed viewpoint. The restart after this is when i started experiencing this crap.
    All i did was do a systm restore back to before i turned off UAC and then uninstalled all of my AIM and AOL junk. Its been running fine since.

    Edit:  Forgot.  I'm Running Vista Home Premium on Dell comp.
    Tuesday, March 13, 2007 7:26 PM
  • Ah, good call. That's probably exactly what's doing it. Too bad I can't back up that far... I've installed so much stuff since the problem cropped up... Dammit.
    Tuesday, March 13, 2007 9:31 PM
  • I've tried rebuilding the Repository by using "net stop winmgmt; delete Repository folder; net start winmgmt" and I've also added LocalService, as above, but my WMI still isn't working properly... this is on Vista Home Premium...

    Yes I have AOL & Viewpoint Mediaplayer installed..

    At this point I dunno what to do, maybe reinstall Vista?   Any other suggestions?

    Wednesday, March 14, 2007 8:01 PM
  • Ahh, figured it out. 

    First, I ran the WMIDiag script and it told me some registry keys were missing... so I added those...

    I eventually got to the section where it recommended restoring the Repository folder with a fresh one from the Vista install disk.  But I couldn't find it in there...

    Luckily Dell has a backup partition (D:) which has a backup of all the system files, so I copied the Repository folder from there, and WMI is now working!

    I've decided to leave those other fixes as they are, left those "missing" registry keys in there, and left the LocalService in the Administrators group...

    Now my Norton Antivirus is acting up... (it's been acting up for a couple of days now...) ugh...

    Jason

    Thursday, March 15, 2007 12:18 AM
  • Thanks god for you guys. Still trying to figure out the WMI thing though.
    Thursday, March 15, 2007 2:08 AM
  • Hi, that fixed my network issues but I am still having the same issues with remote desktop.  Despite all the services and whatnot being enabled, I am still not listening on port 3389.  Any one have any ideas?
    Thursday, March 15, 2007 4:07 AM
  • At the moment I have two user accounts that still work under Vista Ultimate. Same issues as mentioned by others in this thread: Network List Service errors in Event Viewer, unable to create new user accounts that actually work, Windows Vista Experience Index ratings have disappeared etc.

    If this really is a common problem experienced by many users, I would say that Vista has been launched way too early and that the service pack should arrive really soon!!! This is even worse than the launch of XP!

    I'm not thinking of reinstalling as this is just the second week the OS has been installed on my PC. What a disgrace... .

    Thursday, March 15, 2007 8:32 PM
  • I've had Vista Ultimate installed on my home computer since it came out in Feb, but just today the problem (red x, server execution failed, access denied) appeared. In addition, my system was generally way slower than usual, and my sound (Audigy 4) quit working.

    Putting LocalService in Admin fixed the network (and slugishness) problem, but I'll probably have to reinstall my sound drivers for the audigy. Here's some items of note:

    1. I do have a TV Tuner card
    2. I do have Firefox 2
    3. I don't have AIM or any IM on this machine (never have had).
    4. I haven't installed any software (other than Windows Updates) on this machine in the last 2 weeks.
    5. The problem appeared after my computer lost power unexpectedly (my UPS must be bad).

    Now, here's something interesting...
    Over the last two days at work I've been trying to identify and fix a weird problem regarding permissions on my XP Pro box. On this particular problem, my .NET Framework 2.0 was hosed royally. I tried uninstalling and reinstalling many times, trying various internet fixes all the while. No matter what I did, I kept getting an access denied error at a certain part of the install.

    On a whim, I reset ownership of the entire filesystem back to the Administrators group - which fixed the problem.

    My suspicions are these:
    1. A windows update recently went out that changes security in some way that's causing these problems (both the one that is the topic of this thread, and the one I described at work on XP).

    -or-

    2. The problem is occurring as the result of file/registry corruption - particularly corruption that would affect security settings. This would be supported by the fact that reinstalling Vista seems to correct the problem.

    At any rate, having 2 major security related issues pop up on two different machines at the same time seems pretty odd to me - and the only thing those two things share (other than the user) is Firefox 2, .NET Framework 2.0, and Windows Update.


    Thursday, March 29, 2007 2:21 AM
  • There's a command in XP for resetting security permissions on files and registry keys but I don't know what the corresponding command is in Vista.

     

    secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose

     

    secedit is still there but the security catalog and templates aren't the same. You can also use subinacl to reset registry perms but there are groups/users like Restricted and msiserver on some keys and I don't think it would be wise to reset the whole registry with only system and administrators.

    Sunday, April 1, 2007 2:43 AM
  • Well, I managed to find a security template that I could use, but I'm not sure if it's the proper/best one. defltwk.inf is a template that's also in xp/2k so I  thought I would give it a shot, seeing that I couldn't find a secsetup.inf. It has a date of 6/21/06 so I assumed it would've been updated for Vista.

     

    I backed up my registry with ERUNT first and ran the following in a cmd window (in c:\Users\Admin):

     

    secedit /configure /DB secedit.sdb /CFG %systemroot%\inf\defltwk.inf /log secedit.log /verbose

     

    First run I got a critical error and it quit. The log showed it to be hklm\software\Licenses so I checked the perms and there were none. I added Administrators manually and system, users and creator owner were added automatically (inherited).

     

     I ran the command again and got another error - this time on hklm\software\microsoft\windows\currentversion\Run. Again there were no perms so I added them as before and ran the command again. This time, the registry processing completed, although there were still quite a few errors, most on HKLM\software\classes (there were no subkeys listed so I'm not sure if the problem was with specific classes). There were many file errors as well, mostly on old xp style paths such as c:\windows\repair but most of these were likely irrelevant to the problem anyway so it's probably not a big deal. I rebooted and immediately got the startup sound so I knew that part of the problem was fixed. My Uptime and Ping sidebar gadgets also worked. The network connnected icon seemed a little slow coming around but it did after a minute or so. I rebooted again and got the same results so everything appears to be fixed.

    Sunday, April 1, 2007 4:16 AM
  • Turns out they never included the security templates with Vista. You can get them here: http://go.microsoft.com/fwlink/?LinkId=74028

     

    EDIT: These don't reset the file and registry permissions so they won't work. Back to the hunt...

    Tuesday, April 3, 2007 9:17 AM
  • After all the research and such today, I found no real answer. Although it was a bit of a pain. I reinstalled Vista over top if itself (Repair / Upgrade) and it resolved the issues for WMI and the red X in the Task bar.

    I would have liked to have know MS was actually looking into and going to do something about, but I couldn't wait that long. So, I'n the meantime, if you want to just install your O.S. over itself, it will fix you up,

    Best of luck. Ill check back from time to time to see if another fix was posted but this will do for now.

    -Fuel
    Wednesday, April 11, 2007 5:16 AM
  • If you can find the proper default security template, that will solve your problem. Although there were a number of errors, the defltwk.inf template does work and hasn't caused any problems so far.
    Friday, April 13, 2007 8:29 AM
  • I have a brand new Dell laptop that came with Vista Ultimate. The network worked good for a while. After a Windows update I rebooted the computer and voila! The network is gone and I get this error. Since then on, I can only connect to the wireless networks that I had set up before.
     
    I can't believe Microsoft is not providing a patch for this. This is taking forever and my whole productivity is down because of this stupid problem.
    Wednesday, April 18, 2007 3:34 PM
  • I had same problem when I installed ViewPoint Media Player. That software created lot of problems. I applied below fix and it looks like my system is stable again (Windows Visata Home Premium).

     

    Tool2Die4 wrote:
    paul.a wrote:
    I'm running Vista Home Basic, in which localhost was not available. I had success with the following:
    • Boot Windows to Safe Mode.
    • From the command prompt, enter net localgroup Administrators LocalService /add
    • Verify using net localgroup Administrators
    • Restart Windows normally.
    This would work for me only in Safe Mode. It seems to have fixed the network and media issues. However, now I find that my Guest user account won't startup fully -- don't know if it's related to what I did.

     

     

    I am still concerned if the viewpoint has deleted any important system files. My System Restore didn't work after uninstalling ViewPoint. I strongly discourage installing ViewPoint software!

    Sunday, April 22, 2007 6:08 PM
  • just wanted to say that the above method, where you go into the command prompt (home premium edition here) and add Local Service to the administrators group worked great for me, it not only fixed the red x, but also the sound and missing system info on the computer properties screen.  I would like to point out that you should use localgroup instead of what was originally said (must have been a typo).

    Since we seem to have a fix, does anyone know what the problem was, or why on earth this is a fix for all these seemingly unrelated problems?  Just seems like a really strange problem.  Oh, also I just installed viewpoint today to look at a 360 of a honda, but I haven't installed any IM programs on my computer.  I suppose this is pointing more towards viewpoint.

    Anyways, thanks again for the solution!!  It was really driving me bonkers (yes I said bonkers)
    Monday, April 23, 2007 6:30 AM
  • I did a search on the internet for this particular error. I used the suggested solution and it work. If this has already been posted, I apologize for the reposting, if not I hope it works for those having problems with it in the forum. Thanks.

     

    http://support.celeratec.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=70

    Monday, April 30, 2007 1:35 AM
  •  

    I've just 'saved as' in My Documents a U.S. Court of Appeals Opinion from a few years ago whereby people like Aol & Netscape were suing Microsoft over bundling IE to it's

    systems and screwing up/slowing down other internet access providers and search companies and creating it's own Java Virtual Machine etc. I found it on the same page

    as this site and it answers a lot of your questions   ... and mine...... I always assumed I had done something wrong all the time! Hope this helps. Bye. Rona

    Sunday, May 6, 2007 6:33 PM
  • I am running Ultimate and I installed only one program that could have caused this behavior.

     

    I installed Symantec Ghost version 12 and it would not complete the installation after reboot and gave me a E1AD3212 error along with a permissions error. Uninstall and a restore both failed to remedy the situation. I found nothing about this on Symantec's web site and lucked onto this. The above instructions worked perfectly and I would like to say thanks because I was almost ready to do a reinstall which I dreaded. Anyway, nice job in coming up with the solution but I am dismayed with how many other programs may have caused the same problem and I hope Microsoft takes care of this and corrects the restore process so that is backs up and restores the user's and permissions. This is a serious oversight on their part.

     

    Thanks again,

    Burton Crawford

    Sunday, May 6, 2007 10:07 PM
  • I, too, am using Vista Business (32-bit) from my college's MDSN subscription.

    Adding 'NT Authority\Local Service' to the Administrators group does not fix the problem for me. All other symptoms seem to be the same. I have had both Aim 6.0 and 5.9 installed at one point, as well as that steaming pile of dung known as Viewpoint Media Player (uninstall didn't work; I did a filesystem and registry search for 'viewpoint' and deleted everything found). I still have Firefox 2, Daemon Tools, Paragon Partition Manager 8.5 and CloneCD installed. I have never had any antivirus installed.

    I don't have any time to investigate further right now, since I'm trying to be ready to pass all my finals this Thursday and Friday. I'll spend some time next week trying to fix this, but I'm not too confident I'll figure it out. I'm hoping someone else makes progress before then Smile
    Wednesday, May 9, 2007 3:03 AM
  • Microsoft is addressing this problem as we speak, if you add the 'NT Authority\Local Service' and still does not work, I'll recommend using the following:

     

    1. Use system restore to roll back before the install of any AIM.

    2. Do a search on any left-over AIM folders and dir, if it exist, delete it.

    3. Complete the process of adding 'NT Authority\Local Service' to Local Users and Groups before installing AIM.

    4. Install AIM 5.9.3 only (not the 5.9.6 or the 6.0)

     

    Let me know if this works, if not there is a patch I obtain from the MSDN support group that may able to help your problem, this patch will also be include within the upcoming update around summer. Thanks for your patients.

    Wednesday, May 9, 2007 9:18 AM
  • As I and a couple of others mentioned, I don't have (and have never had) AIM or anything from AOL installed on my computers. So that in and of itself eliminates AIM as a cause.

    But hey, addressing the problem is half the battle, so kudos there.
    Wednesday, May 9, 2007 12:01 PM
  • I can't do a roll-back, since the system restore messed up in a freakish way. under the "system protection" tab is a list of all the permanent drives in the system. somehow, I had two listings for drive c:, one labeled "VISTA (C: ) (Missing)" that was checked and one labeled "VISTA (C: ) (System)" that was not checked. all restore points were gone for all drives.

    I could do a clean install, but I would rather not have to deal with reinstalling all programs and getting the multiboot working with xp and linux again unless I have to, especially since the problem may return, anyway.

    @bordelon - you've never had AIM, but is it possible that viewpoint found its way onto your system somehow?
    Wednesday, May 9, 2007 4:13 PM
  • This worked for me, thank you so much! I've been riddled with this problem for months now. Like others, it took a few reboots to work.
    Thursday, May 10, 2007 1:35 PM
  • Server connection failed in Windows Vista

    Server connection failed is a problem that occurs in Windows Vista when there is a change of GUID (Globally unique identifier).

    In Windows Vista, you might get connection status as - server execution failed. You will still be connected with the internet but, except for the administrator, no other accounts might work.

    Well, this happens when the GUID (Globally unique identifier) of a network adapter changes on the computer that is running Windows Vista and the computer indexes an old IP address that was linked with the old GUID. In this case if the old IP address is not a valid one, you can get a connection failure message resulting a connection failure.

    The following are the two downloads that are available. This should resolve your problem.
    For Windows Vista, http://www.microsoft.com/downloads/details.aspx?amp;displaylang=en&familyid=c585e831-41fd-40bd-8923-e542eb7a1b8a&displaylang=en
    For Windows Vista 64-bit systems, http://www.microsoft.com/downloads/details.aspx?FamilyID=8c328a96-f715-48a5-9d92-974e97c74165&DisplayLang=en
     
    Original Thread here:
    http://www.zolved.com/synapse/view_content/28072/Server_connection_failed_in_Windows_Vista
    Hope it helps you all out, it worked for me and AIM sucks..... AOL sucks....
    Tuesday, May 15, 2007 4:42 AM
  • Downloaded hotfix for vista (above) didn't work. 

     

    I still have the same problems:

    • Windows Defender is off and won't turn on
    • Can't play media files in media player
    • red x on network icon in taskbar with error "Server execution failed"
    • Network "anything" is slow or unresponsive.

     

    Problem started for me after installing and uninstalling Adobe CS3 Web Premium.

    Thursday, May 17, 2007 12:16 AM
  • Hey, just wanted to chime in and say the commandline fix worked fine for me:

    net localgroup Administrators LocalService /add

    This is on Windows Vista Home Premium on a Dell Inspiron E1705.



    UPDATE: This wasn't my computer, I thought I'd throw in a couple more "me toos". This computer also:
    -had AIM 5.9.6089
    -had the "Viewpoint" media player pre-installed (it had been removed by the time I was called on).
    -had become unable to play music files (system sounds still worked fine, I "fixed" this by disabling the S/PDIF output from the volume applet)
    -had the "server execution failed" tooltip from the network applet
    -had a red "x" on the network applet, though network AND internet access were usable
    -took a significant amount of time to load the context menu when you right-clicked on the network applet
    -took as long if not longer to load the Network and Whatever Place (sorry, I'm a *nix guy, the one you can access via the network applet context menu)
    -had the Processor(s) and several other items show up as "n/a" when I ran 'dxdiag'

    Thanks again, you people saved my friend a lot of hassle!

    Thursday, May 17, 2007 4:26 AM
  • I wanted to post and say thanks, the fix posted here worked for me adding the localservice to the admin group.

    The bug happened to me after i tried to install KB931770 to fix file transfer issues. Uninstalling the update didn't work but this did, you have saved my day, week, and possibly month of frustration. I'd buy you lunch.

    Friday, June 1, 2007 1:44 AM
  • Well guys, thanks for the fix...i was bashing my head against the wall with this one. However, as soon as i applied this fix all of my word 07 documents and excel files became "locked for editing and in use by another user" does anybody have any insight as to where i should trek from here? also my wmi and computer properties still arn't 100%

     

    TIA

    Saturday, June 2, 2007 5:46 AM
  • Adding the Local Service tag solved my issue with the X on the Network Icon, however I cannot receive Windows Updates, I keep getting an error. Is anyone else having this issue associated with the LocalService problem? If a patch is forthcoming, how can I receive it if I cannot access Windows Updates? This all started when I could not get updates and then I noticed I had the same issue as everyone else on this thread.
    Monday, June 4, 2007 4:27 AM
  • me too, it also says

    Failed to initialize all required WMI classes.

    Win32_Processor: Win32: Access is denied.

    Win32_WMISetting: Successful

    Security information: Successful

    Win32_OperatingSystem: Win32: Access is denied.


    Tuesday, June 5, 2007 7:09 PM
  • I followed what paul. a said and I was able to fix it. My internet network connection no longer has the red X and I can once again listen to music. I have one question though, is it safe to re-install AIM? I used to have 5.9.6, and I don't believe it was the problem, unless you guys object. Also, if I am allowed to re-install AIM without it happening again, I would appreciate a link to which AIM version I am able to download. Thanks a bunch.

    Please, contact me via e-mail at hotscot7@optonline.net
    Tuesday, June 5, 2007 11:23 PM
  • Completely fixed my problem also with Vista Home Premium.....All works now as before....I suspect AOL AIM and/or Viewpoint as I've deleted all references but it's probably corrupted a key somewhere....Thanks for this workaround.....
    Wednesday, June 6, 2007 12:53 AM
  • I had the same problem. This guy fixed it...

     

    http://www.xoxideforums.com/networking/76388-vista-giving-you-server.html

     

    Monday, June 11, 2007 9:03 PM
  • hello all, i've also run into this problem.  adding the local service to the administrators group solved the red x problem, but i was still not able to connect to my machine via remote desktop.  i am running vista enterprise and i did indeed have an AIM 5.9 install on it.  i also had firefox, photoshop, and a few other things that were mentioned here.

     

    i did the reinstall and everything worked dandy again for a day and then the problem came back up.  i reinstalled again and now i'm trying to reproduce the problem on both my computer and a virtual vista install i have going.  getting rid of the red x is great and all, but the remote desktop is really what i need.

    Thursday, June 14, 2007 9:44 PM
  • I tried the fix and it did fix the network problem. However, it did not fit the missing System information, ie: Processor: Not Available, Memory(RAM): Not Available.

    Has anyone found a fix for this yet, they both appeared at the same exact time, on after installing the latest hotfix downloaded from windows update last week.
    Monday, June 18, 2007 3:43 PM
  •  joek1234 wrote:
    I tried the fix and it did fix the network problem. However, it did not fit the missing System information, ie: Processor: Not Available, Memory(RAM): Not Available.

    Has anyone found a fix for this yet, they both appeared at the same exact time, on after installing the latest hotfix downloaded from windows update last week.

     

      

    Joek...I have the same exact problem.  My system information and installed Memory is not available.  Have been looking all around the web for a solution and haven't found one yet.

    Wednesday, June 20, 2007 4:08 AM
  • You guys are AWESOME! Thanks for the tip, the whole net localgroup Admistrators thing worked like a charm! The red x went away, and my music now plays! Lets just hope it stays that way. Thanks a lot guys, you're all geniuses!

    Now, my little message to the Microsoft tech guys...
    This topic started in the beginning of FEBRUARY, and it's now almost JULY! To put it bluntly, this is fucking ridiculous, you should have released an update to fix this. If you fucks down at Microsoft actually take some time to read these damn posts, listen to this. HURRY THE FUCK UP. We payed good money for your product and stand by it while Mac commercials and ads flood the market, and what do we get? Major fucking bugs like this that last for months with no official word on it. It's also sad how these people in this topic are probably doing more damn work than you guys are in fixing these problems, and you fucks are getting payed for sitting on your asses helping no one.
    Saturday, June 23, 2007 6:51 AM
  • I still cannot RDP into my Vista box after the network issue fix...
    Has anyone been able to get it going?


    Tuesday, June 26, 2007 5:20 PM
  • hi guys, i am encountering the same problem - network error (connection status: unknown, server execution failed), and not playiing any media files. for the second problem, i fixed it from sound setting. try to change some of the settings in sound.detailed i forgotbut it helps, still very irritated with the network problem, my wireless network is not working, but can connects through LAN or internet card.but cant open "network and sharing center", it hangs.sucks.
    Sunday, July 8, 2007 11:39 AM
  •  

    >>>>I had the same problem. This guy fixed it...

     

    >>>>>>http://www.xoxideforums.com/networking/76388-vista-giving-you-server.html

     

             I looked at this fix and went down through the list of steps to complete it but ran into a slight snag.

    The list reads as shown below:

     

    the third line reads 'double click the "local Users and Groups"  

    I don't have that option.  What does that mean?  anyone know?

     

    Mike

     

     

     


    >>Right click "Computer"
    >>Click "Manage"
    >>Under the "System Tools" section, Double click "Local Users and Groups"
    >>Click "Groups"
    >>Right click "Administrators"
    >>Click "Add to group..."
    >>Click "Add"
    >>Click "Advanced"
    >>Click "Find Now"
    >>Double click "Local Service"
    >>Click "Ok"
    >>"NT Authority\Local Service" should show up in the list now
    >>Click "Ok"
    >>Close Computer Management and reboot.

    Remember, all credit goes to BlueShot @ Microsoft TechNet Forums!

    Sunday, July 8, 2007 3:51 PM

  • WINDOWS VISTA HOME AND HOME PREMIUM USERS
    this worked for me just make sure you are using an administrator account and than type this into the cmd prompt
    Start>Run>cmd

    Code Snippet

    Net localgroup Administrators localservice /add



    restart and bingo fixed i hope this helps
    Wednesday, August 1, 2007 7:56 AM
  • I have Vista Home Basic.  After I execute this command my connection status is still x'ed out.  This tooltip displays:

     

    The account specified for this service is different from the account specified for other services running in the same process space.

     

    I haven't seen anyone else report this problem.  I suppose I could try to put every service in administrators, but I would prefer a more surgical approach.

     

     

    Update:

     

    I have also had the wmi problem others reported.  The wmi snap-in for Computer Management displayed:

     

    Failed to initialize all required WMI classes.

    Win32_Processor: Win32: Access is denied.

    Win32_WMISetting: Successful

    Security information: Successful

    Win32_OperatingSystem: Win32: Access is denied.

     

    Also, I was unable to install sql server express due to a 'wmi configuration error'.  This command fixed the snap-in and allowed me to install sql server:

     

    net localgroup administrators NetworkService /ADD

     

    Once I completed my install I removed it:

     

    net localgroup administrators NetworkService /DELETE

    Of course the snap-in has problems again.

     

     

    I changed Network Lists Service logon to 'Local Service' (the original I think) and now the 'x' is gone!

     

     

     

    Saturday, August 4, 2007 10:12 PM
  • i am still having this stupid problem....and capn your fix didnt work for me unless i am doing something wrong.  can you list your exact steps?
    Saturday, August 4, 2007 10:41 PM
  • It worked for me too. I did have to do it in safe mode with commands though

     

    Cathy

    Sunday, August 5, 2007 2:01 AM
  • did you make sure your current account was an administrator by adding it?
    Sunday, August 5, 2007 3:28 AM
  • Since I was having many problems with this issue, I'm going to show what I did to fix the problem. First, I did the hotfix which fixed the network problem, but I found that I still had wmi errors and was unable to play any games on Steam. So, armed with google and a caffinated beverage, I went to work. Eventually, I discovered that my computer has a slightly differen't net command.

    So I changed this:

    net localhost Administrators /add Local Service



    To this:

    net localgroup Administrators /add Local Service


    And it worked perfectly. No wmi problems, not even one error when running wmi diag. Hope this helps someone.

    Tuesday, August 7, 2007 7:30 PM
  • I simply uninstalled AIM and it fixed it.

     

    Tuesday, August 14, 2007 8:56 PM
  • Thanks for the tip. It worked perfectly fine for me (I was using Vista Home Premium). Now the red x is gone and back to the two squares with the blue circle. Seriously MS, what the hell is going on to the point where we, as in the customers, have to come up with solutions for your glitches? I hope they release some kind of patch or service pack to fix this issue in the future.

    Thursday, August 23, 2007 4:47 AM
  • I've found out myself that doing a dual-boot configuration actually causes your restore points to be effectively wiped out everytime you go to boot into the other OS and then back to Vista as it (the Restore Points feature) is affected by the dual boot process.

     

    Saturday, August 25, 2007 5:00 PM
  •  

    I was able to fix the network problem and the Media player issues by doing the safe mode boot and the localservice fix, but I still don't have a working WMI. I use a usb internet card provided by Verizon to connect to the internet while on traveling and it can't be configured either which I suspect is related to this.

     

    Has anyone been able to figure out how exactly to restore teh WMI?

     

    Thanks.

    Friday, September 7, 2007 1:09 AM
  • Thanks to all for figuring this out I have been dealing with this since March.  Using Vista Business, no AIM, just the problem of the red x over the networking icon in the notification area and not being able to bring up and change, view or modify network connections and the Network List Service service would not start telling me I did not have enough resources.  Using Dell Latitude D620 with intel Core2 Duo 2 GHz processor and 2GB of RAM I think I met the resource requirements.  Have tried everything from reinstalling NIC's to reinstalling full OS, nothing has worked.  In addition, trying to connect to wireless networks was impossible.  The command line option worked for me:

     

    From the command prompt, enter net localgroup Administrators LocalService /add
    Verify using net localgroup Administrators

    Restart Windows normally.

     

    However, I did not need to do this in safe mode, just started the command prompt as administrator.

     

    Friday, September 7, 2007 3:02 PM
  • Yeah, anyone have any info on how to fix WMI?  My computer now says i have "Not Available" under processor and memory and can't connect to WMI using the msinfo32 program (system information)
    Monday, September 10, 2007 11:19 PM
  • Thank you so much Blueshot.  You have really helped me out, and a lot of other people too.

    I'm not religeous but God bless you my friend!
    Tuesday, September 25, 2007 9:16 PM
  • did u receive a  solution yet
    if so please share it with me because i have been having this problem for 2 days now
    and without my music and videos i might go insane
    also Internet is necessary for schoolwork


    Tuesday, October 2, 2007 4:28 AM
  • im having the same exact problem
    did u find a solution yet?
    nobody seems to have a solution on the internet
    thanks in advance Stick out tongue
    Wednesday, October 3, 2007 3:11 AM
  • Originally posted by Blueshot:

     

    FIXED!

    At least for me.  I had already taken care of the multimedia issue by reinstalling the Creative Labs SoundBlaster Audigy 2 drivers, but I still had all of the network issues described in this forum.  To finally fix the network problems all I did was add the Local Service account to the Administrators group.  I'm sure there is some particular file access or registry key access issue that I could have fixed directly and maybe I'll try to find the particular corrupted security setting at a later date.  Just in case you need it here are the steps I took...

    >>Right click "Computer"
    >>Click "Manage"
    >>Double click "Users and Groups"
    >>Click "Groups"
    >>Right click "Administrators"
    >>Click "Add to group..."
    >>Click "Add"
    >>Click "Advanced"
    >>Click "Find Now"
    >>Double click "Local Service"
    >>Click "Ok"
    >>"NT Authority\Local Service" should show up in the list now
    >>Click "Ok"
    >>Close Computer Management and reboot.

    Hopefully this will fix it for everyone.  If anyone finds the exact file(s) or registry key(s) that needed the permissions modified I'd be interested to know.

     

    I actually feel, even though this had fixed the problem, that there is still a registry access problem.  My Vista stopped being able to access and edit registry entries a long time ago.  And it shows, when running registry cleaning tools and backup programs that backup my registry.  The programs pause for a while, as if they are just constantly retrying for registry entry, then eventually windows error message service pops up with "Windows could not start registry editor" or something similar.  To be honest, I've uninstalled Vista for the meantime as this was not the only error I was getting.  I was also getting a lot of graphic driver issues with the 8800GTX and the latest drivers 163.71 with "nvlddmkm" errors stopping the display driver every 10 seconds.

     

    Vista is a great OS, but I just don't want the hassle at the moment.  Soon Crysis will be released and I will have my copy, but until then I will keep XP.  If anyone ever manages to port DX10 to XP then I'll stick with XP, it's much easier on the resources.

    Wednesday, October 3, 2007 8:58 AM
  • I can confirm that AIM (version 6.5 in my case) is the culprit.

    I recently did a clean install, since I didn't have a good restore point when I had this problem.  I then have been very careful about installing anything, creating an image of my hard drive before hand so that I can easily revert back.

    I installed the latest version of AIM, and then I had these issues come up again.  IIS doesn't work, the network status icon has the "Server Execution Failed" message, and my User Experience Index doesn't work either.  I then tried uninstalling AIM. AIM went away, but not my problems.  This forced me to do a restore of my backup.

    I think I'll be using Trillian or AIM Classic and see if this fixes the problem.
    Thursday, October 4, 2007 3:37 PM
  • Thank you Blueshot!  I'm not sure that there is any one single cause for this issue.  After reading all 14 pages of this thread, I did see a few common possible causes, but no one definitive cause.  I had this problem with one of my co-workers PCs here in the office.  She doesn't have AIM installed but does have Firefox.  But then she has just about every web browser used today installed (she's a developer).  I too have all kinds of software installed (all the browsers, IM software, various other apps) and yet I didn't have a single problem.  I sure hope he M$ can fix this issue in some way other than adding Local Service to the local admin group.  This seems like a potential security nightmare if this is the only way to fix the issue.  Another note to any of the MS engineers who may be looking at this problem, it also seems to really mess with IIS7 and ASP pages run on the local machine.  Once again, my machine was no problem to setup, yet following the EXACT same steps on my coworkers machine results in some strange issues with ASP pages where they end up failing calling simple functions.
    Thursday, October 4, 2007 6:04 PM
  • For those still having problems with WMI after following Blueshot's directions, here's how I solved the same problem on my computer (Windows Vista Business): 

    Follow Blueshot's directions again, up to the point where you selected "Local Service" from the list, and instead scroll down and look for "Service."
    Then resume following Blueshot's instructions to add "Service" to the Administrator's group.


    To do this from the command line just use the same command that's been given previously on this thread, with Services instead of LocalService:

    Net localgroup Administrators service /add


    This worked for me, anyway.  I had installed Aim 6.5, which caused the same problems reported on this thread.  Following Blueshot's instructions resolved the "server execution failed" problem in the "Network and Sharing Center," but WMI still didn't function correctly.  I added "Service" to the Administrator's Group, rebooted, and everything appears to be working normally again.  I also uninstalled AIM 6.5 before doing this, so I don't know if it has to be uninstalled for WMI to resume functioning properly or not.

    Friday, October 5, 2007 10:04 PM
  • Hi Burton,

     

    Unless I missed somehting, I couldn't find the fix you referred to.  I'm having the same problem as you described.  I'm running Wndows XP SP2.

     

    Thanks, CLG

     

    Saturday, October 6, 2007 6:33 PM
  •  ISKH wrote:

    For those still having problems with WMI after following Blueshot's directions, here's how I solved the same problem on my computer (Windows Vista Business): 

    Follow Blueshot's directions again, up to the point where you selected "Local Service" from the list, and instead scroll down and look for "Service."
    Then resume following Blueshot's instructions to add "Service" to the Administrator's group.


    To do this from the command line just use the same command that's been given previously on this thread, with Services instead of LocalService:

    Net localgroup Administrators service /add


    This worked for me, anyway.  I had installed Aim 6.5, which caused the same problems reported on this thread.  Following Blueshot's instructions resolved the "server execution failed" problem in the "Network and Sharing Center," but WMI still didn't function correctly.  I added "Service" to the Administrator's Group, rebooted, and everything appears to be working normally again.  I also uninstalled AIM 6.5 before doing this, so I don't know if it has to be uninstalled for WMI to resume functioning properly or not.

     

    Hey, thank you so much bro! Worked like a charm, you and blueshot are life-savers.  I wonder if there's any other thing we have to add to the Administrators group?  I feel like something is still broken but we just can't see it yet, I really hope Microsoft patches this so we don't have to mickey-mouse the problem with this work around.

     

    Thanks again guys.

    Sunday, October 7, 2007 2:04 AM
  • Just another person with the same issue as you all..*sigh*...For me it was DEFINATELY AIM 6.0 that brought about this curse...everything was working fine until I installed that horrible demon program..  Sad   *patiently waitin for a fix*....

    Sunday, October 7, 2007 3:26 PM
  • I just tried the modified fix (adding Service instead of Local Service to the administrators group). This worked for me and fixed WMI and the network issue. The odd thing is that after rebooting the red X still appeared on the network icon. After right clicking the icon and bringing up the network properties there was a short hang, the red X disappeared and then the properties came up as normal.

     

    I as well had AIM 6 and ViewPoint installed. I uninstalled both before attempting this fix. I do have one concern, however. By adding this service to the administrators group are we not causing a security risk by giving a very limited user complete administrative rights? Does anyone know why this fix works? I've read many boards in the past weeks and no one seems to explain why doing this works.

     

     

     

    Sunday, October 7, 2007 3:54 PM
  • THANK YOU!!! this is the only thing that worked for me (running Vista Home Premium)...seems to have resolved everything!!

    Sunday, October 7, 2007 4:40 PM
  • whenever i make service an administrator my mouse constantly flashes back and forth  between normal and working in the background
    Monday, October 8, 2007 4:33 PM
  • Same here. I tryed every media player and got Real Player to work. thats the only one tho.
    Tuesday, October 9, 2007 2:22 AM
  • The top and bottomz fail.
    http://67.165.225.221:8000/Probz.jpg
    Tuesday, October 9, 2007 2:36 AM
  •  ISKH wrote:

    This worked for me, anyway.  I had installed Aim 6.5, which caused the same problems reported on this thread.  Following Blueshot's instructions resolved the "server execution failed" problem in the "Network and Sharing Center," but WMI still didn't function correctly.  I added "Service" to the Administrator's Group, rebooted, and everything appears to be working normally again.  I also uninstalled AIM 6.5 before doing this, so I don't know if it has to be uninstalled for WMI to resume functioning properly or not.




    Ok, I've had this problem on my mom's Dell Inspiron E1405 laptop with Vista Home Basic edition with AIM 6.5 installed but using this command worked:

    net localgroup Administrators LocalService /add

    That only fixed the Network List service problem and the Network trayicon problem but not the WMI problems.  To fix the WMI problems, use crazymonkey's solution mentioned a few pages back in this thread which I did and the WMI problems went away.  Just type in the following command in either normal mode or safe mode:

    net localgroup Administrators /add Local Service

    Then restart the computer and WMI should work correctly again.  Hope this helps other Vista users out there who are having these problems.

    I've now un-installed Viewpoint media player but continue to use AIM 6.5 since my brother and I like using AIM.

    E.P.


    Tuesday, October 9, 2007 6:54 PM
  •  Claudio Girolami wrote:

    Hi Burton,

     

    Unless I missed somehting, I couldn't find the fix you referred to.  I'm having the same problem as you described.  I'm running Wndows XP SP2.

     

    Thanks, CLG

     



    The fix does not apply to XP SP2, CLG.  only applicable to Vista.  I believe Burton is using Vista Ultimate and not any edition of XP.
    Tuesday, October 9, 2007 7:09 PM
  • what i did to fix the situation was install the posted hotfix, add local service and service to the administrators group and redo the ownership on my drive to administrators now all is well and i have aim installed

    Tuesday, October 9, 2007 7:51 PM
  • By following the instructions to add the Local Services to the Admistrative group, I was able to restore my network.

    Doing the same thing and adding the Service listing to the group solved the ability to view system information when viewing my computer's propertied (Experience Rating now shows as well).

    I know many have described that they feel that AIM did this.  I've used AIM 6 for months now with no problem, but I also uninstall Viewpoint after every AIM update because it's a useless program and I like to keep my list as clean as possible by uninstalling anything not needed or that seems 'shady.'  I recently moved up to 6.5, but I didn't get the errors until tonight's (10/9/07) Windows Update ran and told me about all of the new things (14 new items tonight, aside from the annoying language packs) that were available.

    The question arose on a post a few before this one as to whether or not uninstalling AIM before performing the two manual fixes changed the outcome.  The user DID uninstall first, I DID NOT.  We both got the same outcome.  I truly do hope this works for everyone else, and I seriously do feel for those of you who had to wait longer than it took me to read through 9 pages of posts until Blue came up with a quick fix.

    Big Smile
    Wednesday, October 10, 2007 4:37 AM
  • I just installed Aim 6 last night to send a file to a friend. I turned my machine off when I went to bed. When I got home from work my computer loads all funky and wont play any sound files. In fact it won't even let me watch any avi files either. Did uninstalling AIM fix it or am I gonna have to preform a system restore?

    Wednesday, October 10, 2007 4:05 PM
  •  

    I managed to fix it. uninstalled aim did nothing. I finally got my restore points to load and restored to a point before I had put AIM on it. And to make a major note. AIM did not create a restore point. isn't all software suposed to do that when you install it? I declare that AIM is a virus!
    Wednesday, October 10, 2007 4:45 PM
  •  Firesped wrote:

     

    I managed to fix it. uninstalled aim did nothing. I finally got my restore points to load and restored to a point before I had put AIM on it. And to make a major note. AIM did not create a restore point. isn't all software suposed to do that when you install it? I declare that AIM is a virus!


    Not all third party software makes restore points, Firesped, unless the software installation was created from a Windows Installer package or InstallShield package.  AIM uses a different installer that system restore does NOT recognize and does NOT use MSI (Windows Installer) or InstallShield to setup AIM.  that's why no restore point was created by installing AIM.
    Basically, AOL and AIM software use their own proprietary installer instead of either InstallShield or Windows Installer.
    Read Vista's Help file and search for System Restore and it should tell you that restore points for programs are created when they use installers such as InstallShield or Windows Installer.

    Well, I un-installed AIM 6.5, rebooted and re-installed AIM 6.5 on my mom's Vista laptop and the "network" problem never came back.  weird.
    Wednesday, October 10, 2007 10:52 PM
  • I've also got the bug.

    AIM 5.9.6089
    Firefox

    I can play MP3s I just can't share folders and files.
    Thursday, October 11, 2007 11:17 PM
  • I fixed my networking problems by adding localservice but I still had wmi issues as well. I just installed the latest version of AIM 6.5 and I now have my wmi back now. I hope this works for someone else as well.
    Friday, October 12, 2007 2:40 AM
  • Does anybody know why AIM 6.5 causes this issue? Happened to me too!

     

    Friday, October 12, 2007 4:01 AM
  • For anyone wondering who's on a clean install of Vista, the last working version of AIM that doesn't ruin your Vista is v6.5.3.12 that you can get by going here:

     

    http://filehippo.com/download_aim/?3094

     

    Then click on Downoad this Version from the top right.

     

    So ridiculous that AIM/AOL hasn't fixed this issue yet.
    Saturday, October 13, 2007 10:22 PM
  • Thanks!! I finally fixed my issue and is able to get remote desktop working again.  But I got another problem, when I try to login with a non adminstrators account, it would try to login but it just does nothing.

    Computer Management->Local Users and Groups->Group->Users has the following members
    ASPNET
    my user account
    NT AUTHORITY\Authenicated Users
    NT AUTHORITY\INTERACTIVE

    Is it missing anything else?


    Wednesday, October 17, 2007 12:29 PM
  • Here is a report of the fix.

     

    Well now there's a fix! Thanks to a regular Vista user on Microsoft's TechNet forums, a fix has been found!
    Here ya go:

    >>Right click "Computer"
    >>Click "Manage"
    >>Under the "System Tools" section, Double click "Local Users and Groups"
    >>Click "Groups"
    >>Right click "Administrators"
    >>Click "Add to group..."
    >>Click "Add"
    >>Click "Advanced"
    >>Click "Find Now"
    >>Double click "Local Service"
    >>Click "Ok"
    >>"NT Authority\Local Service" should show up in the list now
    >>Click "Ok"
    >>Close Computer Management and reboot.

    Remember, all credit goes to BlueShot @ Microsoft TechNet Forums!

     

    Thursday, October 18, 2007 3:18 AM
  • When i click "Manage" how come i don't have "Local Users and Groups" under "System Tools"? 

     

    All i have is:

    Task Scheduler

    Event Viewer

    Shared Folders

    Reliability and Performance
    Device Manager

     

    please help???

    Thursday, October 18, 2007 12:41 PM
  • You will have to use the cmd interface for Home Premium or Home Basic. Only enterprise, Business, and Ultimate users can configure users through the management console.

    To to the steps above with CMD,

    Click the start button
    In the instant search, type "CMD"
    Right click on the Cmd short-cut, click "Run as Administrator" (If using User-Account Control)
    Type " net localgroup "Administrators" "NT Authority\Local Service" /add" (without quotes)
    This should solve the problem.

    Thursday, October 18, 2007 3:00 PM
  • Silver: worked like a charm! thank you so much.

     

    Anyone who has Vista Home Premium or Home Basic, follow silver's instructions and it should work out for you.

    Friday, October 19, 2007 4:44 PM
  • Great job that you found a "fix", and I hate to be an issue, but it just says:

     

    Code Block

    There is no such global user or group: NT.

     

    There is no such global user or group: Authority\Local

     

    The command completed with one or more errors.

     

    More help is available by typing NET HELPMSG 3783

     

     

     

    Then I tried the help message, which shown:

     

    Code Block

    There is no such global user or group: ***.

     

     

     

    PLEASE HELP!!!  Same issues.  Using a Compaq 6515b, Vista Home Basic, installed latest AIM 6, disconnected network icon, no RAM/Processor info on sys props, WMI bullcrap.  Can't do a reinstall, since the laptop didn't come with a disc, just HP's crappy bootable recovery thing.

    Saturday, October 20, 2007 7:52 PM
  •  

    EXCELLENT. this is the correct solution.

     

    now i have a question for any tech people...

     

    is there anything wrong with my computer now that i have:

     

    NT AUTHORITY\SERVICE

     

    listed when i type net localgroup administrators in the cmd?

     

     

     

    i ask this because on another laptop with a fresh install of vista, there is no mention of

     

    NT AUTHORITY\SERVICE. what does this actually do or mean?

    Sunday, October 21, 2007 6:49 AM
  • Ok, but ultimately the question is, what exactly is AIM 6.5 doing that causes this?

     

    Previously there was no need to add Local Service or Service to the admins group. By default

    they have admin priveleges. So how does installing AIM 6.5 compromise that?

    Sunday, October 21, 2007 10:14 AM
  • nvm, I uninstalled AIM after running this command, rebooted, and now it works.  Thanks for the fix Silver!!!

     

    David, I don't know how they found out, and I'm still lost also as to how adding the service fixes it, but I do hope AIM finds out soon.  Meanwhile I'll have to settle with Trillian.

    Sunday, October 21, 2007 1:57 PM
  • I dont think it's just AIM. I never had AIM insalled and I have every single issue discussed here. Including the network detection, cannot see processor and memory info in system properties, cannot RDP, and cannot login to non admin accounts.

     

    While I have fixed most of the issue (thanks for the people who found the fixes) by adding the specified services to the local admin group, I am still unable to login to a non admin account (new or old). When I first create an account I login and while it's building the profile, I get an error "Windows mail could not be started because msoe.dll could not be initialized". I click ok, and then it contintues to build the profile settings (Internet Explorer, etc...) and then just sits there on a light blue screen. I can do Ctrl+Alt+Del and pull up task manager or logout, but it will not pull up Explorer or anything else.

     

    Has anyone found a fix for this?

     

    I am running Vista Ultimate.

     

    MS, get SP1 out will ya???

    Sunday, October 21, 2007 2:50 PM
  • I'm having this issue as well using Vista Home Premium 32-Bit on a Toshiba Satellite laptop. My issue started about two days ago and I've had this laptop for a few months. I automatically suspected AIM 6.0 to be the problem as everytime I did a system restore AIM was also uninstalled. After I would re-install it the problem would resurface.
    I also got fed up with my sound card not working properly. I fixed that (hopefully it wont go out again) By updating the drivers there and restarting. The x for my network still appears yet everything lets me connect. My system says my Ram and Processor are unavailable. I still have 76.8 Gb of space on my system and total I have 147 GB of space. I know it's not a problem with the Ram as I have plenty. Shouldn't this be a problem microsoft should be addressing?
    Thursday, October 25, 2007 6:08 PM
  •  

    This is in response to an issue with Windows Vista WMI not executing properly, and no system info in the system properties screen, sound issues and the like. the main issue for me was with the Network and Sharing center and the "Connection: Unknown, Server Execution Failed" and a constant red X even though internet works. I'm running Vista Ultimate x64.

    Along with a solution by blueshot. There were some more steps to solving this on my computer. Here were blueshot's original steps, my addins are below.

    Right click "Computer"
    Click "Manage"
    Double click "Users and Groups"
    Click "Groups"
    Right click "Administrators"
    Click "Add to group..."
    Click "Add"
    Click "Advanced"
    Click "Find Now"
    Double click "Local Service"
    Click "Ok"
    "NT Authority\Local Service" should show up in the list now
    Click "Ok"
    Close Computer Management and reboot.
    ---------------------------
    Here's what I had to do.
    **These users should be added to Administrators if not already there:


    \CREATOR GROUP
    \CREATOR OWNER
    \OWNER RIGHTS
    NT AUTHORITY\INTERACTIVE
    NT AUTHORITY\IUSR
    NT AUTHORITY\LOCAL SERVICE
    NT AUTHORITY\NETWORK
    NT AUTHORITY\NETWORK SERVICE
    NT AUTHORITY\REMOTE INTERACTIVE LOGIN
    NT AUTHORITY\SERVICE
    NT AUTHORITY\SYSTEM

    If you are missing any of those users in the Administrators Group, it will cause Vista to not function properly. I tested each one myself last night and adding all these groups solved all my issues.

    Friday, October 26, 2007 11:50 AM
  • I am working on an HP Laptop that had the network issue. I fixed it using Blu's fix, but remote desktop still doesn't work. Can I ask how you got remote desktop working?

    Friday, October 26, 2007 6:08 PM
  • hey this works completely for lenovo T61, Vista Home Premium. Tried the other string from blushot, didnt work, but this change did it. might be for others as well?

    My problems were:
    -"X" Server Execution Failed
    -WMI not available
    -Steam Games (CS, etc.) crashing.

    Fixed all problems. hope it stays that way.

    Thanks, crazymonkey
    Friday, October 26, 2007 9:15 PM
  •  crazymonkey wrote:
    Since I was having many problems with this issue, I'm going to show what I did to fix the problem. First, I did the hotfix which fixed the network problem, but I found that I still had wmi errors and was unable to play any games on Steam. So, armed with google and a caffinated beverage, I went to work. Eventually, I discovered that my computer has a slightly differen't net command.

    So I changed this:

    net localhost Administrators /add Local Service



    To this:

    net localgroup Administrators /add Local Service


    And it worked perfectly. No wmi problems, not even one error when running wmi diag. Hope this helps someone.

    Friday, October 26, 2007 9:18 PM
  • Awesome, thanks Paul!  AOL was totally useless, no support whatsoever.

     

    Saturday, October 27, 2007 4:46 AM
  • I have the same issue with the network connection. I also have the problem with the inability to play any media files at all. This is extremely exasporating!!! This is rediculus in fact. Does microsoft have any kind of solution for this? I attempted to do a system restore but it failed both times. It seems that I can't restore to a point before I installed the latest version of AIM.
    Saturday, October 27, 2007 6:26 AM
  • Hey i have a SOLUTION to the problem of not being able to play videos, movies, mp3s, audio files, etc, after installing AIM 6.5

     

     

    This is going to sound ridiculous, but I just did it, and it worked instantly.

     

    1) Go to control panels

    2) go to the "sound" control panel


    When you click on it and open it, you will instantly get some kind of an error message about some ridiculous problem, and you can choose to Allow or Disable.

     

    CHOOSE DISABLE.

     

    Instantly, your entire problem is fixed.

     

    I found the solution on another site online, but was unable to find it again to link in this post. It worked like a charm. I don't know WHY it happened, or WHAT caused it, but its works!

     

     

     

    Sunday, October 28, 2007 3:28 AM
  • Thank you so much.  Dell wanted to walk me through a system rebuild!!

    Your steps worked perfectly for my Vista Business laptop.

     

    Thanks again!!!

     

    Sunday, October 28, 2007 7:20 PM
  • I am having all of the formentioned problems...
    I am running vista, just installed the new AIM, HP Pavillion dv9000
    AMD Turion 64x2
    I just got off the phone with HP in India and they said it was because my Norton Subscription was about to expire.
    I got rid of Norton, installed and ran AVG and still all the same problems. What gives!?

    Sunday, October 28, 2007 10:35 PM
  • I updated AIM on friday, turned off my computer. went to turn it on today... and i had this problem. I cannot play music, and my network connections is effed up. i can still browse the internet, but the connection burps a lot.

    I used system restore to friday (before i installed the new AIM).

    problem solved
    Monday, October 29, 2007 1:12 AM
  • I would like to add that I have resolved my "connection status : unknown" and "server exectution failed" !!!! Also my music plays!! Thank you so much everyone! I installed the plugin (KB929451) but that did not work for me. I started with Safe Mode and entered net localgroup Administrators Local Service /add. It added successfully and I rebooted. Everything is much faster now (in the process of trying to resolve this issue I deleted a lot of programs and also defragmented lol..). Thank you everyone again! My Vaio VGN-FE800 series works again!!... for now...

    P.S. I had AIM and Viewpoint and they both worked before I fixed this problem but I uninstalled them anyways. Also I have a Home Premium version. I also right clicked the sound icon in my taskbar and clicked "sound". It told me Window's detected something was messing with my computer so I just clicked disable.

    THANK YOU ALL!!!!

    edit: i thought my problems started after installing zone alarm security suite. on top of that i also had avira free antivir, adaware, windows firewall, windows defender, and norton. i deleted norton (crappy trial) and avira, and turned off windows firewall and defender since im just running zonealarm now which has spyware and antivirus in it anyways. but when i signed on aim successfully since it didnt affect my computer( probably was the right version) i noticed that it was the latest version i guess automatically updated.
    Monday, October 29, 2007 11:16 PM
  • Jeffrey555 good luck fixing your problem, same issue here and after reading through a number of the posts in this thread, the laptop to my left appears to have most issues resolved.

     

    "I just got off the phone with HP in India and they said it was because my Norton Subscription was about to expire."  This comment substantially changed my mood, thanks.  First laugh I've had since the problem began.  Although this is assuredly not funny to you, it's amazing that your tech believed that an upcoming expiration was the problem.

     

    AIM appears to be the culprit in my case, I've been hitting the remind me later button for a week or two now (until today) because I was unable to find a way to say explicative NO.  AIM also installed some "Viewpoint" software that you may want to uninstall as well.

     

    Best of luck,  thanks for sharing.

     


     

    Monday, October 29, 2007 11:28 PM
  • This is incredibly sad that this issue has been posted on and been and ongoing issue since the release of Windows Vista in February and still has not had an official patch or anything from Microsoft that I can find.  I've had Vista Ultimate on my computer since March, and I just now ran into this problem.  When I find that this problem has been around since February and microsoft hasn't released a fix for it yet, it is very discouraging about Microsoft's competence about fixing important issues.  It dosn't matter what the actual culprit of the problem is, wether its aim or a windws update, what matters is that it is a problem in windows vista that needs to be fixed so that it dosn't happen.

     

    Media is one of the most important things to a home user, so when it isn't work because of this bug it's a huge deal.  Remote Desktop is a very beneficial tool for business and it to is effected by this bug, yet Microsoft is doing what, from what I can find they havn't even acknowledged the bug.

     

    Now after reading through the couple hundred posts in this topic, I have applied the before stated fixes and while yes it does fix the problems it opens a huge security hole on the computer.  Anyone that has applied these fixes stated in this topic, you are now giving free access to your entire hard drive contents to anyone who can access your network.  Thats right anyone.  I tested this myself tonight when I applied the fixes.  My hard drives are not shared, I don't even have file sharing turned on, but if I try to access my computer across the network from another computer, instant free full access control.

     

    Even access to user documents that are suppose to be private for that user only, as well as program files and system32.  Can go in and modify files, delete files, add files, anything I want to do from another computer never having even entered a password.  Thats the saddest part my computer is password protected yet my files are now open to the public.

     

    I'm at a toss up on wether I should leave the problem fixed and allow anyone that can gain access to my network access to my files as well, or if I should undo the "fixes" and not be able to use remote desktop, nor play any media files as well as having a few other problems here and there.

    Tuesday, October 30, 2007 4:00 AM
  • Perhaps this issue does deal with AIM or AOL software in some way.  I have Home Premium and use AOL software proper (don't bash me for this!) the "VR" or "Vista Ready" version.  I experienced the red x, server execution failed and no sound (but NOT the WMI issues) after unchecking one of two AOL entries in msconfig startup.  Odd that there's only one there now...forget the names of the startup processes, but the only one there now is the "AOLsoftware.exe" which puts the AOL icon in the system tray.  Anyway...

     

    My Question Is This:

     

    Does anyone know what the net localgroup (or localhost, depending on Vista version)Administrators /add Local Service command actually DOES?  It can be undone using /delete in place of /add, correct?  I've done so, but no amount of removing AOL completely (using registry editors, etc.) will fix the "server execution failed."   Perhaps I missed it earlier, for that I apologize.  What does it do, and does anyone have any inkling of how it fixes this problem?

    Steven6282:  I was presuming that it was a poor work-around, and you stated just how it is, but unfortunately it's the only one.  It's very sad that CONSUMERS must come up with answers, not Micro$oft.  I give up; I'm going to be re-installing Vista from scratch, along with XP which I'll use until MS stops the BS about Vista and fixes the d**n thing.

     

    I'm also VERY disappointed in Microsoft for not owning up to how FRAGILE Vista is.  I've had it for a month now, and it's like whack-a-mole...fix one problem, another (or two) crops up.  Heaven forbid you should install a program, or have software with poor uninstall code.  It will screw Vista up every time.  A large portion of my free time the last month has been chasing down Vista problems, including a very unreliable "system restore."  At one point, programs took hours to install, presumably because a restore point was created but never finished, and had to "time out" every step of an InstallShiled installation.  Somehow this is now fixed, too, but I'm just waiting for the next problem.  If you look at the pages on the MS website or listen to the Crabby Office Lady, Microsoft was on a big "We care, and we listen to you" kick for a while..."There are feedback forms at the bottom of almost every page!"  Well, who listened to THIS issue, started in February?  How long until it was resolved?  When will MS own up to the fact that Vista is the WORST first-release OS they have EVER shoved out the door prematurely and supported so infrequently?  How long has Vista been out of beta testing and forced on the general public?  And it's still a mess?!  Google "Vista" and almost everyone hates it and/or is RUNNING back to XP.  Microsoft HAS to know, they just don't address the big problem they have, and thus, inferred from this non-action, DO NOT SEEM TO CARE.  "MS cares" has been shown to be BS as far as I'm concerned.  Sorry for the slightly off-topic rant, but MS had better wake up!  I'm no longer laughing at the "Mac vs. PC" Apple commercials.  As far as Vista goes, a few of them hit way too close to home.

     

    Vista has good intentions and has potential, but right now it's just pretty stuff masking a horribly flawed OS.  You can mold dog poop into a rose, but it's still going to stink.

    Tuesday, October 30, 2007 8:29 AM
  • You know, I tried to email support about this problem this morning.  Come to find out I can't, they want me to pay 59 dollars to email them because it's been over 90 days since my product was activated.  What kind of BS is that?  I'm not paying 59 dollars to get support for a problem that has been around since release and is not fixed yet.  It's funny that it even specifically said on the form that if you are a Windows Vista user, you have no charge support for 90 days after activation... all other OSs have 90 days from the first time they submit a support ticket.  I wonder why that could be?  Is it possible that Microsoft knows Vista has tons of problems and they want to get as much money as they can out of people that don't know any better?  This is the reason microsoft dosn't actually provide any support here, it's not getting them any money.

     

    This is a reported serious issue, that they have neglected to fix yet and it is causing loss of productivity and is potentially damaging computers.  I know every OS is going to have bugs when they first release, but imo when it is a bug that cripples key aspects of the computer it should be priority #1 to get fixed.  This is by far the most devastating bug I've found in Windows Vista yet, and the fact that it has been around for so long without being fixed is just plain out ridiculous.  I may have only just experienced this bug, but being the fact that I'm a computer tech and have been vouching for how much I like windows vista to all my customers, to find out a bug like this can be around for so long without a fix really infuriates me.  Because of this one single bug, I'm now going to be recommending to all my customers to stick with Windows XP for as long as possible, or if they prefer to switch to a Macintosh.  I don't have any direct experience with Mac's new OS but I heard it is going a lot smoother than Vista is.

    Tuesday, October 30, 2007 1:38 PM
  • Is there an official fix for this from AOL or from Microsoft?

     

    Wednesday, October 31, 2007 12:34 AM
  • blueshot's fix works to resolve the "server execution failed" error and resolved an issue with Windows Mobile Device Center not loading.  Adding "Service" to the administrators group fixes the issue with system information.  Can't help but wonder what security issues this creates.  See Steven6282 post on 10/30/07.  I personally do not have the same results he does but adding these two internal users to the local administrator account clearly is not the best solution overall.  Yes it works but are we causing more problems?

     

    Still can't access this system via RDP.  Anybody have a fix for that?

    Wednesday, October 31, 2007 4:42 AM
  • I typed these commands and they work. Please boot into safe mode and do as follows. The commands work my rig is saved. Also I uninstalled AIM version 6 and above. I am going to go to WWW.Oldapps.com and dling and older version of aim. I would suggest anyone having this same problem to do the same. It is very easy and simple to understand. Just run the net localgroup Administrators LocalService /add command. then run the net localgroup Administrators right after in the next command line. Works Great and when you reboot.
    Wednesday, October 31, 2007 9:31 AM
  • Can someone walk me through these steps?  I have no idea what localgroup, Administrators, etc. 

     

    Wednesday, October 31, 2007 4:47 PM
  • I had the message " Server execution failed" & could not access my network also the icon in the notification area had a red X on it. I was at a loss until I searched Google and found this site which cured the problem,  www.xoxideforums.com/networking/76388-vista-giving-you-server.html - 118k - .   

     

     

    Wednesday, October 31, 2007 4:59 PM
  •  paul.a wrote:
    I'm running Vista Home Basic, in which localhost was not available.  I had success with the following:
    • Boot Windows to Safe Mode.
    • From the command prompt, enter net localgroup Administrators LocalService /add
    • Verify using net localgroup Administrators
    • Restart Windows normally.
    This would work for me only in Safe Mode.  It seems to have fixed the network and media issues.  However, now I find that my Guest user account won't startup fully -- don't know if it's related to what I did.

     

    Bless your little heart, Paul.....I'm being forced, kicking and screaming, into using Vista.  My machine did the network server execution failed thing....I have to admit, even after years of supporting Micro$oft products, I wouldn't have guessed or figured out the command line fix for this.  Worked like a charm.  Now if I could only figure out what broke it, and if there aren't supposed to be any "local users and groups" displayed under "Manage" in "my computer" menu.

     

    I really wish M$ would quit working so hard on making their OS's look like Apples, and just work on making them work right.

     

     

    Wednesday, October 31, 2007 11:35 PM
  • Hey everyone

    I have also received the same stuff i've been reading here.

    I also found a soultion for this

    WORKAROUND

    Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

    To work around this problem, modify the value of the following registry subkey:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems\Windows
    To do this, follow these steps:
    1. Click Start, click Run, type regedit, and then click OK.
    2. In Registry Editor, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems
    By default, the Windows entry in the subkey has a value that is similar to the following (all on one line):
    %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
    3. Right-click the Windows entry, and then click Modify. The Edit String dialog box appears.
    4. In the Value data box, locate SharedSection, add 512 to SharedSection, and then click OK.

    The newly changed Windows entry reads as follows:
    %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16

    After this is completed restart the computer and all should be fine.

    Thursday, November 1, 2007 1:42 AM
  • Does this solution work for the newest version of AIM 6.5.5.2, or only with AIM 6.5.3.12?

    Thursday, November 1, 2007 3:41 AM
  • Um...thanks for the effort, answers, but 512 was ALREADY part of my subkey.  There goes the workaround that doesn't create a HUGE security hole in your system.  To quote a user on the AOL message boards about the net localgroup(service) administrators fix:

     

    "Only an idiot will put Local Service / Network Service in the administrators group and give them elevated rights.  You're asking for nothing but problems and security issues by doing that.  I wouldn't count on really finding a true fix to this issue any time soon."

     

    Can anyone tell me what the security risks ARE?  How does this command open up my computer?  I suppose an integrated router firewall is no help if you give localservice elevated rights?  What could potentially happen?  I'm asking a second time; some people are just satisfied with the "fix," but I'd like to find out what it DOES.  Anyone?  Please?

    Thursday, November 1, 2007 6:45 AM
  • Well pgh, I'm a computer tech, I wont claim to know everything there is to know bout my security but my understanding of it is this.


    By default Local Service is not given administrator rights to protect you, for example a service starts up cannot modify files and registry entries that require administrator access.  So by adding Local Service to the admin group, you are essentially giving every service on your computer full reign over your computer.  This would make it a lot easier for viruses and spyware to cause you problems.  Again that is my understanding of it and may not be 100% correct.  Regardless it is a security hole even if I'm not correct in my thinking.  It was not part of the administrators group to begin with for a reason.

     

    The security hole I have, with all my files being completely open as if I'm sharing them with full rights I'm not, is caused by adding the necessary groups to admin to fix the Remote Desktop issue.  I have to use my computer for Remote Desktop multiple times a day so I cannot go without this feature, just adding Service to the admin group does not fix Remote Desktop.

     

    Now as far as router / firewall helping, in my case I turned on my wireless security on my router, so that not just anyone driving by my house can get on my network.  But this isn't a real solution, this is just hiding microsofts problem and it is still a security risk for people that may try to access my network over the internet.

     

    With just Local Service added, I honestly can't say what internet type security risks there are, if any.  But if I'm correct in my beliefs about the Local Service rights, you are much more open to nasty viruses and such if you accidentally download one, and your router / firewall is not going to prevent that.  Come to think of it, antivirus software may not even detect a virus running at admin level because admins have the right to do those things that the virus would be doing.  Again I could be wrong on that, I'm just thinking out loud more or less without actually researching it.

    Thursday, November 1, 2007 1:34 PM
  • I'm worried about this as well..
    Thursday, November 1, 2007 8:18 PM
  • well i added the local service to the admin in the local group and it did fix my network services problem, but now whenever I try to shut my computer down, it wont. it will just keep being at the shutting down stage and will never turn off so I just hold the power button. i dont think the bug/glitch is completely fixed.. unless someone can tell me how i can fix this other problem for me. thanks
    Thursday, November 1, 2007 9:22 PM
  • Mr. Hickerson:

     

    Thanks so much for replying to my request.  I've posted in several groups on the net, and heretofore nobody has attempted to explain what the potential security risks of this "fix" are.  "Thinking out loud" was all I was looking for.  You did so admirably, and I thank you.   

     

    No matter what caused this problem, I just continue to have issues with "Windows Vista Whack-a-Mole."  Correct one problem, another pops up.  My Windows Media Center will not recognize my TV card, and therefore won't let me watch live TV or record it.  I have a host of other problems, such as the AOL install problem (which also occurs in XP) where the install program acts as if you hit "cancel" when it attempts to complete the installation.  When time permits, I'm just going to re-install Vista and also install XP as a dual-boot OS.  Perhaps I'll just end up with the same problems again, but at least I'll be able to pinpoint when it happens, and perhaps revert to a backup or just stop using Vista altogether until it's suitable for use, which IMHO, it is certainly NOT at this stage.  I'm thinking M$ will just play it like they did when ME came out with a host of problems...instead of REALLY supporting the OS and fixing the problems, they'll just introduce a new one.  Don't go looking for "Vista with SP2," as the OS after Vista will probably come long before that point.  Sorry again for being majorly off-topic.

     

    Friday, November 2, 2007 5:50 AM
  • I sent my brand new HP DV9000 laptop back to HP to get fixed (Hinge on the left side of the screen broke).  When it came back i was having the same problems as everyone else.  I thought it was something HP did.  I am running Vista Ultimate. AIM 6.5.5.2 YIM and Firefox.  Im going to try uninstalling firefox and see if that might fix it.

    Very frustrating.
    Saturday, November 3, 2007 12:33 AM
  • Well I've followed the usual tricks people have posted. Fixed my network "X" issue, fixed my sound, things seem to be okay. Then I'm finding Firefox to crash a lot and now I'm having problems with games on Steam, specifically anything that uses Half-Life 2.

    Unfortunately I can't restore to before I installed the AIM update, which I'm convinced is definitely the problem. So I'm wondering... is there a way to reinstall vista or at least fix it with the install disc that DOESN'T overwrite everything so I have to start from scratch? I honestly am not about to hold my breath waiting for AOL to release a fix, so this seems to be my only option.