none
No Boot after windows update RRS feed

  • Question

  • Hi,

    i've got wondows 7 running with all my nvidia troubles by sing adive somewhere her ein the forum regarding the DVI connector.

    I had W7 running 3 weeks and yesterday, it indicated, that there is an optional update for nvidia 6150 available. I installed it and coud mot boot anymore - it told nme on the first screen the usual IRQ_LESS_THAN...

    as a sidenote before reinstalling I tried to recover by reloading it from WHS whcih equally did not work, but that's for another forum I believe

    Erik

    • Moved by OthorvathModerator Saturday, February 7, 2009 3:05 PM (Moved from Windows 7 Installation, Setup, and Deployment to Windows 7 Miscellaneous)
    Sunday, February 1, 2009 11:54 AM

Answers

  • Hi

    You can get this error if your system is overclocked or if you have ram issue too, but probably in your case it is caused by HDD controller driver problem

    You can use F8 as Sanginius suggest you, but to try loading using LAST KNOWN GOOD CONFIGURATION boot menu option, or you can try setting your HDD controller in IDE mode instead of RAID mode if possible of course

    Monday, February 2, 2009 12:23 PM

All replies

  • Is it possible to boot into safe mode at all?

    Did you try booting off of your windows 7 disk and repairing startup, or using system restore?
    Sunday, February 1, 2009 12:09 PM
  • No, I could not boot into safe mode (same error) and I used the repair from the win7 CD, which also did not work.

    I tried also to boot with the monitor on DVI as well as on standard VGA (since this prohibited to boot at first installation some weeks ago!)

    Could there be any problem with my Mobo ?? It is a Asus M2MPV-MX with nvidia 6150 and nForce 430. It runs without problem on xp and vista though...

    Erik

    EDIT:

    ..and I forgot, after installing the first time successfully, I installed all available Mobo support drivers (especially NVIDIA) for vista. After that it ran fine. It was just after the download after it failed.....

    Monday, February 2, 2009 10:22 AM
  • Have you tried to boot into windows in standard VGA mode? available through F8 advanced boot options. that should let you get back into windows and r-install a video driver that works.
    Monday, February 2, 2009 11:28 AM
  • Hi

    You can get this error if your system is overclocked or if you have ram issue too, but probably in your case it is caused by HDD controller driver problem

    You can use F8 as Sanginius suggest you, but to try loading using LAST KNOWN GOOD CONFIGURATION boot menu option, or you can try setting your HDD controller in IDE mode instead of RAID mode if possible of course

    Monday, February 2, 2009 12:23 PM
  • Sanginius,

    I am not coming that far, when it boots it shortly flashes the BSOD message at me and reiinits...

    F8 has no effect there....

     

    Erik

    Tuesday, February 17, 2009 8:50 AM