none
Cannot eneble network adapter RRS feed

  • Question

  • Hello i have just reinstalled the windows 10. And before and after i experienced to network adapter cannot eneble after disabled becouse adapter change to USB thethering adapter or other.

    So What is the solution to eneble this all times after disabled. May some windows Update confusing? All hardver test passed in Intel(R) PROSet Adapter Configuration Utility:

    Hardware Test Results [2020. 01. 25. 3:28:47] :
      Register Status  :Passed
      EEPROM Status    :Passed
      FIFO Status      :Passed
      Interrupt Status :Passed
      Loopback Test(s) :Passed
    _________________________________________
    Connection Test Results [2020. 01. 25. 3:29:22] :
      Connection Status : Passed
    Successfully pinged Gateway address 192.168.1.254
      Cable Link Status : Passed
    This adapter is running at full speed.
    _________________________________________
    Cable Test Results [2020. 01. 25. 3:29:29] :
      Cable Length Status : Passed
    Cable Length: 27 meters
      Cable polarity Status : Passed
    Cable polarity normal.
      Local Receiver Status : Passed
    Passed
      Remote Receiver Status : Passed
    Passed
      Cable Quality Status : Passed
    Cable quality is excellent.
      Cable Integrity Status : Passed
    No cable problems detected.

    Windows version:

     

    I have GA-270 Ultra gaming ver1 motherboard, I7 7700k CPU, Integrated Intel HD GPU (630), Samsung 970 Pro ssd

    Saturday, January 25, 2020 2:43 AM

All replies

  • Hi,

    I suppose the "Intel PROSet" adapter would be a built-in NIC for ethernet (instead of WiFi), and that it would be activated after tethering stops. 

    Please check how the Internet-connection icon looks.
      connected to network via ethernet:
          
      connected to network via WiFi:
          
      Not connected to network:
          

    Regards,

    Ashidacchi -- http://hokusosha.com

    Monday, January 27, 2020 1:46 AM
  • Hi,

    >>And before and after i experienced to network adapter cannot eneble after disabled becouse adapter change to USB thethering adapter or other.

    You can follow the steps to set up USB tethering on Windows 10.

    1. Connect your phone with Windows 10 using a USB cable.
    2. If asked to enable file transfer feature, cancel it.
    3. Usually, there is a prompt available as soon as you connect,saying “Tethering or Hotspot active—Tap to setup.” Tap on it.
    4. If there is no prompt, go to Settings > Network and Internet > Hotspot and Tethering > Toggle on USB tethering.

    You can refer the following article for more details:

    https://www.thewindowsclub.com/set-up-usb-tethering-on-windows-10

    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

    Hope this can help you, if you have anything unclear, please let me know.

    Have a nice day!

    Ellen


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Monday, January 27, 2020 8:18 AM
  • Hi,

    Just checking in to see if the information provided was helpful.

    Please let us know if you would like further assistance.

    Best Regards,

    Ellen


    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Thursday, January 30, 2020 9:29 AM
  • I am connected via ethernet. On the time when error appear i can see the "Not connected to network" icon.

    I know how to set USB Tethering. No problame with that, but i have problame when cannot eneble or disable network ethernet adapter. It was just after my VPN disconnect. It is nordvpn desktop app. I have conected with support but than not provided any useful information for solve problame. I suspect it couse the nordvpn app, which not let change to normal network. 

    Saturday, February 1, 2020 1:48 PM
  • Hi,

    You can contact with the third-part application support for better answers.

    You could mark the useful reply as answer if you want to end this thread up.

    If there is anything else we can do for you, please feel free to post in the forum.

    Hope this can help you.

    Best Regards,

    Ellen



    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Tuesday, February 4, 2020 11:22 AM
  • Unfortunately i dont know any third-part application support accourding to the adapter. 
    Friday, February 14, 2020 11:08 PM